進口葉片泵｜美國進口葉片泵

進口葉片泵｜美國進口葉片泵

進口葉片泵特點：

1子母葉片的結構設計，減少了葉片對定子的沖擊，在較高的工作壓力和高轉速下，性能更穩定，壽命更長。

2、子母葉片結構本身具有低噪音的特性。12葉片的設計、流量脈動很小，噪音更低。

3、多排量的選擇。以及泵芯的插裝式結構，使用戶使用更靈活，維修更方便。

進口葉片泵概述：

葉片泵轉子旋轉時，葉片在離心力和壓力油的作用下，尖部緊貼在定子內表面上。這樣兩個葉片與轉子和定子內表面所構成的工作容積，先由小到大吸油后再由大到小排油，葉片旋轉一周時，完成一次吸油與排油。

進口葉片泵工作原理：

它的作用原理和單作用葉片泵相似，不同之處只在于定子表面是由兩段長半徑圓弧、兩段短半徑圓弧和四段過渡曲線八個部分組成，且定子和轉子是同心的。在圖示轉子順時針?lè)较蛐D(zhuǎn)的情況下，密封工作腔的容積在左上角和右下角處逐漸增大，為吸油區，在左下角和右上角處逐漸減小，為壓油區；吸油區和壓油區之間有一段封油區把它們隔開。這種泵的轉子每轉一轉，每個密封工作腔完成吸油和壓油動作各兩次，所以稱為雙作用葉片泵。泵的兩個吸油區和兩個壓油區是徑向?qū)ΨQ(chēng)的，作用在轉子上的液壓力徑向平衡，所以又稱為平衡式葉片泵。

進口葉片泵技術參數：

流量：8-40L/min  壓力：3.5-7.0MPa 轉速：800-1800r/min
驅動功率：0.7-5.8kw  配管尺寸：進口：1、1 1/2 出口：3/4、1 1/4

進口葉片泵美國泰樂TYLER售后服務：

用戶*，信譽*，優質、完善的售后服務是我們產品價值的延伸和對客戶利益的重要保證，我公司服務質量管理體系的宗旨是：建立并不斷完善科學、合理、高效的服務質量管理體系，公正、準確、及時地完成客戶的售后服務質量保障工作，為我公司的客戶服務建立良好、全面、充分的服務體系。

Inlet vane pump

Inlet vane pump features:

1 structural design of vane, blade is reduced to stator impact in high pressure and high speed, more stable performance, longer life.

2, characteristics of composite vane structure itself has low noise. 12 blade design, flow pulsation is very small, lower noise.

3, the choice of multi displacement. As well as the pump core plug-in structure, so that users use more flexible, more convenient maintenance.

Introduction of imported vane pump:

When the vane pump rotates, the blade is attached to the inner surface of the stator under the action of centrifugal force and pressure oil. The working volume of two rotor blades and the inner surface of the stator and the first increase after absorbing from large to small oil, rotating blades of a week, a row of oil and oil.

Inlet vane pump working principle:

The principle and function of the single action vane pump which is similar, the only difference is that the surface of the stator is composed of eight parts and two long, two short radius arc radius of the arc and four transition curve, and the stator and rotor are concentric. In this case the rotor turns clockwise, the volume of the sealing chamber in the upper left corner and lower right corner increases gradually, as oil area, in the lower left and upper right corners decreases gradually, as pressure oil; oil pressure oil between the area and a sealing oil to separate them. The rotor of the pump rotates every turn, and each working chamber is sealed for two times of oil absorption and oil pressure action. Two suction pump and two pressure zone area is radially symmetric, the radial equilibrium fluid pressure acting on the rotor, so called balanced vane pump.

Technical parameters of inlet vane pump:

Flow rate: 8-40L/min pressure: 3.5-7.0MPa speed: 800-1800r/min

Drive power: 0.7-5.8kw size: 1, 1: Import Export: 3/4, 1 1/4 1/2

The United States imported vane pump TYLER Taylor customer service service:

Customer first, reputation first, customer service quality, perfect service is the important guarantee of our products and to extend the value of the interests of customers, our service tenet is: quality management system, establish and improve the service quality management system is scientific, reasonable and efficient, fair, accurate and timely completion of customer service and customer service quality assurance the establishment of good, comprehensive, full service system for my company's customer service.