德國進口雙吸離心泵

德國進口雙吸離心泵 進口雙吸離心泵廠家 進口雙吸離心泵價格Double suction centrifugal pump

德國KAYSEN凱森進口雙吸離心泵概述
雙吸離心泵供輸送清水或物理化學性質類似于水的其他液體，根據用戶需求，通過改變泵結構及材質可用于輸送多泥砂水或各類腐蝕性液體。

主要特點：

●雙吸密封環用以減少水泵壓力室的水漏回吸水室。

●泵通過彈性聯軸器由電動機直接傳動，必要時亦可用內燃機傳動。

●軸封為軟填料密封（根據需要也可裝機密封）。為了防止空氣進入泵內和冷卻潤滑密封腔，在填料之間裝填料環，水泵工作時少量高壓水，通過泵蓋中開面上的梯形凹槽流入填料腔，起水封作用。

●泵的主要零件有；泵體、泵蓋、葉輪、軸、雙吸密封環、軸套等。除軸的材料為優質碳鋼外，其余主零件由鑄鐵、鑄鋼、不銹鋼制成。

●泵體與泵蓋構成葉輪的工作室，在進出法蘭上，裝有安裝真空表和壓力表的管螺孔。進出水法蘭的下部，裝有放水的管螺紋孔。

●經過靜平衡檢驗的葉輪，用軸套和兩邊的軸套螺母固定在軸上，其軸向位置可通過軸套螺母進行調整。葉輪的軸向力利用其葉片對稱布置、兩面進水達到平衡。

●泵軸承為向心球軸承。軸承裝在軸承體內、安裝在泵體兩端，用黃油潤滑。

主要優點：

●軸封 選用機械密封或填料密封。能保證8000小時運行無泄漏。

●安裝形式 裝配時不需調整，可根據現場使用條件。分立式或臥式安裝。

●加裝自吸裝置，可實現自動吸水，即不需

●結構緊湊 外形美觀，穩定性好，便于安裝。

●運行平穩 優化設計的雙吸葉輪使軸向力減小到zui低限度，且有優異水力性能的葉型，并經精密鑄造，泵殼內表面及葉輪表面極其光滑具有顯著的抗汽蝕性能和高效率。

●軸承保證運行平穩，噪音低，使用壽命
●安裝底閥，不需真空泵，不需倒灌，泵可以啟動。

主要應用：

●工廠

●礦山

●城市給排水

●電站

●農田排灌

●水利工程

Germany KAYSEN imported double suction centrifugal pump overview
Double suction centrifugal pump for conveying water or other physical and chemical properties similar to water, according to user needs, by changing the pump structure and material can be used to transport more muddy water or all kinds of corrosive liquids.

main feature:

● Double suction seal ring to reduce the pump pressure chamber water leakage back to the suction chamber.

● The pump is driven directly by the motor through the elastic coupling and, if necessary, with the internal combustion engine.

● The shaft seal is a soft packing seal (which can also be installed as required). In order to prevent the air from entering the pump and cooling the lubrication chamber, filling the packing ring between the packing, the pump work a small amount of high pressure water, through the pump cover in the opening of the trapezoidal groove into the packing chamber, from the water seal.

● The main parts of the pump are: pump, pump cover, impeller, shaft, double suction ring, sleeve and so on. In addition to the shaft material for high-quality carbon steel, the rest of the main parts from cast iron, cast steel, stainless steel.

● The pump and pump cover constitute the impeller of the studio, in and out of the flange, with the installation of vacuum gauge and pressure gauge tube screw hole. Into the lower part of the water flange, with the water pipe hole.

● The impeller with static balance check is fixed on the shaft with the sleeve and the sleeve nuts on both sides. The axial position can be adjusted by the sleeve nut. The axial force of the impeller is symmetrically arranged with its blades, and both sides of the inlet are balanced.

● The pump bearings are radial ball bearings. Bearings installed in the bearing body, installed at both ends of the pump, with butter lubrication.

Key Benefits:

● Seal seal Mechanical seal or packing seal. Can guarantee 8000 hours to run without leakage.

● installation form of assembly without adjustment, according to field conditions. Separate or horizontal installation.

● Install the self-priming device, can achieve automatic water absorption, that is not required

● compact structure beautiful appearance, good stability, easy to install.

● Smoothly optimized design of the double suction impeller so that the axial force reduced to a minimum, and excellent hydraulic performance of the leaf type, and by precision casting, pump shell surface and impeller surface is extremely smooth with significant anti-cavitation performance and high efficiency.

● bearing to ensure smooth operation, low noise, the service life
● installation of the end of the valve, no vacuum pump, no back irrigation, the pump can start.

main application:

● Factory

● Mine

● City water supply and drainage

● power station

● farmland irrigation and drainage

● Water conservancy project

德國進口雙吸離心泵 進口雙吸離心泵廠家 進口雙吸離心泵價格

德國KAYSEN凱森對您的承諾：

●放心的質量：從鑄件到產品，實行全過程質量監控，*檢測，責任到人！

●貼心的價格：高效成本控制，自產自銷，減少中間環節，讓利于客戶！

●快速的貨期：充足的庫存，上海便捷物流，縮短交貨期，嚴格按照合同期交貨！

Germany Kaysen commitment to you:

● Reliable quality: from casting to the product, the implementation of the whole process of quality control, all-round detection, responsibility to the people!

● intimate price: efficient cost control, production for sale, to reduce the intermediate links, to help customers!

● fast delivery: adequate inventory, Shanghai convenient logistics, shorten the delivery time, in strict accordance with the contract delivery!

進口雙吸離心泵廠家 進口雙吸離心泵價格