德國Leonard Breitenbach GmbH 傳熱與冷卻輥 托輥和導輥 粉碎輥 活塞和柱塞
德國Beluk GmbH PF-correction/measuring校正測量
PCF-relays
德國伊斯拉ISRA機器視像
德國蓋米Gemue傳感器系統及顯示裝置
傳感器系統顯示單位
壓力測量系統
流量測量系統
液位測量系統
溫度測量系統
:王工
同號
449147851
價注意事項:
1.請發書面詢價函(郵件,,傳真等),不接受口頭報價。
2.如果型號不能*對上,請?zhí)峁┯⑽钠放泼?具體型號+數量。
3.詢價的商友請主動告知公司名稱和,謝謝。
Display un :王工 同號 449147851 價注意事項: 1.請發書面詢價函(郵件,,傳真等),不接受口頭報價。 2.如果型號不能*對上,請?zhí)峁┯⑽钠放泼?具體型號+數量。 3.詢價的商友請主動告知公司名稱和,謝謝。its |
| |
| The universal display unit GEMÜ 1275 can be used in the field of machine and plant construction and in laboratory and processing systems. A display of up to 4 1/2-digits shows the various measurement values (pressure, temperature, flow). Versions ZP, ZT and ZF can be programmed via a keyboard at the front. |
|
| |
| Photo | Type | Description | | GEMÜ 1275 | Universal digital display unit 3 1/2 or 4 1/2 digit LED display 0-10V; 0/4-20mA input signal optional relay outputs |
|
Pressure measurement systems |
| |
| The GEMÜ 3120 is available in various different versions for the pressure measurement system area. The devices are available as pressure transducers, differential pressure transducers and differential pressure measurement devices. Pressure transmitters and pressure measurement devices for the high purity area can be found under HydraLine- pressure measurement system. |
|
| |
| Photo | Type | Description | | GEMÜ 3120 | Pressure/differential pressure transmitter Versions: 2-wire transducer or 4-wire pressure measuring device with display |
|
| |
| GEMÜ offers various function principles for the area of flow measurement systems: - Flowmeters according to the variable area principle for the measurement ranges from 2-20,000 l/h, suitable for the attachment of limit switches, instrument sensors and reed contacts to detect measurement values and to transmit them.
- Flow transmitters can be used both as pure measurement turbines and as totalizers or batch controllers for measurement ranges from 0.3 – 25,000 l/h. The measurement turbines provide various electrical output signals for further processing.
- A magnetically inductive flowmeter (MID) completes the product range. It can be used for nominal sizes of DN 25 – 300 and be set precisely to the respective application conditions using its electronics. Interfaces such as R232 and Profibus-DP enable uncomplicated integration in fully automated plant control systems.
- SonicLine® ultrasonic flowmeter for corrosive and ultra pure media. The device has no moving parts in the medium flow and has a measuring range from 0.03 – 120 l/min (0.5 – 2000 ml/sec.) depending on the nominal size.
For further information please refer to the product list below and the download area. |
|
| |
| Photo | Type | Description | | GEMÜ 800 | Flowmeter variable area principle. For inert or corrosive liquids and gases. Mounting facility for electrical limit switches or instrument sensors. DN 20 - 65 | | GEMÜ 840 | Flowmeter part flow principle. For inert or corrosive liquids. Mounting facility for electrical limit switches or instrument sensors. DN 65 | | GEMÜ 850 | Flowmeter variable area principle For inert or corrosive liquids and gases. Mounting facility for electrical limit switches or instrument sensors. DN 10 - 15 | | GEMÜ 1250 | Limit switch acc. to ATEX With integrated bistable Reed change-over contact. For GEMÜ flowmeters with magnetic float. For GEMÜ 800 flowmeters | | GEMÜ 1251 | Limit switch max. contact acc. to ATEX and UL-approval With integrated bistable Reed contact For GEMÜ flowmeters with magnetic float. For GEMÜ 800 flowmeters | | GEMÜ 1252 | Limit switch min. contact acc. to ATEX and UL-approval With integrated bistable Reed contact For GEMÜ flowmeters with magnetic float. For GEMÜ 800 flowmeters | | GEMÜ 1256 | Limit switch max. contact acc. to ATEX and UL-approval With integrated bistable Reed contact For GEMÜ flowmeters with magnetic float. For GEMÜ 850 flowmeters | | GEMÜ 1257 | Limit switch min. contact acc. to ATEX and UL-approval With integrated bistable Reed contact For GEMÜ flowmeters with magnetic float. For GEMÜ 850 flowmeters. | | GEMÜ 1270 | Instrument sensor acc. to ATEX For flowmeters with variable area principle. With integrated chain of resistors. For GEMÜ 800 flowmeters | | GEMÜ 1271 | Instrument sensor acc. to ATEX For flowmeters with variable area principle. With integrated chain of resistors. For GEMÜ 850 flowmeters | | GEMÜ 1272 | Instrument sensor For flowmeters with variable area principle. 2-wire version with integrated measuring transducer. For GEMÜ 800 flowmeters. | | GEMÜ 1273 | Instrument sensor For flowmeters with variable area principle. 2-wire version with integrated measuring transducer. For GEMÜ 850 flowmeters. | | GEMÜ 3020 | Flow transmitter, turbine For inert, corrosive, liquid aqueous media. Frequency or current output signal. DN 25 / 50 | | GEMÜ 3021 | Flow transmitter, turbine For inert, corrosive, liquid aqueous media. Totalizer or Batch controller (dosing device), freely adjustable measuring range. DN 25 / 50 | | GEMÜ 3030 mFlow | Magnetically inductive flowmeter For cost effective measurement of volumetric flow and flow rates. RS 232 interface, field bus connection. DN 25 - 300 | | GEMÜ C38 SonicLine | High Purity PFA ultrasonic flowmeter, for flow measurement, dosing, batch processes, flow rate control from 0.09 - 120 l/min (depending on DN), high accuracy ± 1% of measured value, ultra-fast 250 measured values/sec., good reproducibility of measured values of 0.5% |
|
Level measurement systems |
| |
| GEMÜ provides a well-balanced product range of level measurement systems for recording measurement values and system automation. The LevelLine line of products which we supply is a compact modular system for the most varied of application areas. As well as various function principles, several attachment and installation variants can be selected. Level controllers in various designs make integration in plant automation easy. | Function principles | Level switches with a float, ultrasonic (contactless), vibration, capacitance, optical level switches | Installation variants | Individual installation using unions, clamps or flanges, single point level switch system, multiple level switch system, installation in the stand pipe | For further information please refer to the product list below and the download area. |
|
| |
| Photo | Type | Description | | GEMÜ 902 | Level transmitter integrated Reed contacts for monitoring inert or corrosive media independent of pressure, conductivity, concentration and density | | GEMÜ 910 | Level transmitter integrated chain of resistors for monitoring inert or corrosive media independent of pressure, conductivity, concentration and density | | GEMÜ 920 | Ultrasonic level transmitters 2-wire version Measuring range 0.15 - 5.4m freely adjustable | | GEMÜ 921 | Ultrasonic level transmitters 3-wire version Measuring range 0.15 - 7.4/12.2m freely adjustable | | GEMÜ 922 | Ultrasonic level transmitters 2-wire version Measuring range 0.09/0.15 - 1.8/3.7m | | GEMÜ 925 | Ultrasonic level transmitters Measuring range 0,15 - 3,7m Two integrated relay outputs for alarm + filling / emptying function | | GEMÜ 930 | Level switch - Ultrasonic with integrated switching output | | GEMÜ 931 | Level switch - Vibration with integrated switching output | | GEMÜ 932 | Level switch - Capacitance with integrated switching output | | GEMÜ 933 | Level switch - Float with integrated switching output | | GEMÜ 934 | Level switch - Optical with integrated switching output | | GEMÜ 940 | Multiple level switch system for mounting of max. 4 level switches GEMÜ 930-934 | | GEMÜ 941 | Single level switch system for mounting of one level switch GEMÜ 930-934 | | GEMÜ 947 | Compact system for direct mounting of one level switch GEMÜ 930-934 | | GEMÜ 1290 | Level controller for DIN rail mounting switching amplifier with alarm or filling / emptying function | | GEMÜ 1291 | Level controller for mounting to GEMÜ 930 - 947 as junction box or switching amplifier with alarm or filling / emptying function |
|
Temperature measurement systems |
| |
| GEMÜ 3220 is available as a temperature transducer and a temperature measurement device with an integrated display. Measurements are made by a PT100 temperature sensor. |
|
| |
| Photo | Type | Description | | GEMÜ 3220 | Temperature transducer Versions: 2-wire transducer or 4-wire temperature measurement device with display |
|
機器人視像(Robot Vision)...從第三維看更清楚
在這里您能找到完整的機器人視像系列,他們是世界上*的,包括從2D到6D的所有可能性。即使在工業應用和高速工藝中,我們的系統也可以可靠地完成zui復雜的自動化工作。其主要特點包括識別能力強、靈活、使用簡單、與對的機器人制造廠商標準界面。 | | |
市場*生產的機器人視像儀 - ROBOT VISION
*完整創新產品系列。我們提供任何自動化和機器人的應用標準。
2D 機器人視像檢測系統 | 2½D機器人視像檢測系統 | MONO 3D |
| | |
| | |
| | |
3D形狀匹配 | 3D攝影測量法 | 3D立體傳感器 |
| |
|
| | |
| | |
3D立體系統 | 3D視像輔助 | 3D可適應的無需校準機器人自動化 |
|
|
|
表面視像儀 - SURFACE VISION
®
高速光學在線檢測
對于單一的、有圖案的、印刷的、鍍膜的或彩色復雜的表面,當今市場需要zui高質量的產品。即使是zui小的偏差或缺陷也會導致生產中斷和減產。在你們工業的工藝周期內我們提供我們的經驗以及為以下復雜表面、表面形狀和生產方式提供基于攝像機的已被證明了的全自動化檢測解決方案:
技術表面 | 表面類型 | 生產方法 | 薄膜、金屬箔 | 單一表面 | 個件貨物 | 玻璃 | 有圖案的 | 大容積貨物 | 塑料 | 鍍膜 | 卷材 | 漆面部件 | 彩色表面 | | 無紡 | 印刷表面 | | 紙業 | 漆面 | | 印刷產品 | | |
| |
| |
我們的解決辦法遵循一個基本理念,即標準模塊、標準組件在公司內設計和生產。這種做法保證了zui高水平的客戶靈活性。我們系統高接受率和高性能,其重要的基礎是它們的安全、錯誤可復現、我們?cè)谏?的實時快速能力和它的耐用、可靠。
一般特點: | | |
缺陷分類 | | 缺陷顯影 |
缺陷數據庫 | | 缺陷記錄 |
已發生缺陷影像數據庫 | | 實時影像處理 |
檢測結果統計評估 | | 容易使用和安裝 |
與現有工藝周期相融合 | | 通過控制單元*可控制、監控 |
遠距離診斷和維修 | |
質量視像 - QUALITY VISION
多用途控制系統保證質量
質量視像系統 (Quality Vision Systems) 用來保證裝配完整、檢查位置、檢測大小和外形、辨認部件、及校驗部件和生產編碼。這些全自動化的系統是根據標準模塊生產的,保證了可靠的99.9%質量控制。
應用:
· 裝配完整性檢查
· 現場檢測
· 粘結劑應用檢測
· 外形檢測
· 位置檢測
· 條件檢測
· 類型檢測
· OCR、OCV、點陣、數據陣代碼識別
· 產品代碼校驗
· 生產代碼和代表物關系校驗
· 罐頭和包裝檢測
視像模塊 - VISION MODULES
®
重點在機械工程如汽車、飛機、塑料、紙業、包裝 ( 食品、包裝 )、制藥、或紡織的所有資本貨物和供應領域內的客戶都對伊斯拉系統的可靠性、效率、效力極其滿意。
這一成功是基于穩步的基本理念以及基于使用我們自己的標準模塊。所有的關鍵元件都是在公司內開發和制造的。我們的視像模塊可以大量定購,對工業領域客戶十分典型。它們適合機械工程中耐久、快速、可靠的解決方案。它們?nèi)菀走\(yùn)輸、根據客戶要求制造成形。
Power Factor Control Relay BLR-CX
Microprocessor controlled power factor controller with 1-phase measurement system
zoom | - Start menu for easy commissioning
- Automatic detection and correction of the phase of current and voltage connection
- Fully-automatic c/k-value setting, self adapting, connection of different capacitor step sizes possible
- Automatic detection and usage of the optimum capacitor step
- Switching programs: Best Fit, LIFO, manual mode, combifilter, progressive
- Capable for 4-quadrant operation
- 1-phase measurement system also suitable for non-sinusodial currents and voltages
- Supply voltage taken from measuring voltage
- Voltage measuring 90 – 550V, 45 – 65Hz
- Current measuring 15mA – 5A, suitable for CT x/1A und x/5A
- Connection with plugable screw terminals
- LCD with backlit
- Display of all important grid and system parameters
- Display of THD U and voltage harmonics from 3rd to 15th order
- Input for temperature sensor or thermostate (n/o)
(this input can be used to switch-over the tarif by n/o contact) - Alarm relay with voltfree n/o contact (operated at normal function)
- TTL-interface on rear
- Instrument casing for cutout 144 x 144mm, depth 49mm
- Protection class IP20 (casing), IP50 (front)
further information, optional parts and supplies (PDF; 120kb) |
|
Power Factor Control Relay BLR-CM
Mikroprocessor controlled power factor controller with 1-phase measurement system and display of measurement values
zoom | - Full-automatic c/k-value setting, self adapting (not possible for dynamic steps), connection of different capacitor step sizes possible
- Automatic detection and usage of the optimum capacitor step
- Manual mode possible
- Multiple connection types possible through adjustable phase compensation angle
- Capable for 4-quadrant operating
- Individually configurable discharging time allows quicker switching time
- 1-phase measurement system also suitable for non-sinusodial currents and voltages
- Graphical LCD for display of step status, measurement values and system data
- Measurement display for U, I, P, Q, S, THD U, THD I, ΔQ, F, T
- Harmonics measurement for voltage and current up to the 31. order
- Counter for active and reactive work
- Flexible alarm system with up to 15 alarms
- Programmable digital input and digital output
- Programmable alarm relay with voltfree c/o contact
- Supply voltage 115/230V, 45-65Hz, other voltages on request
- Voltage measuring 50 – 530V, 45 – 65Hz
- Current measuring 15mA – 5A, suitable for CT x/1A und x/5A
- Connecting with pluggable screw terminals
- Instrument casing for cutout 144 x 144mm, depth 49mm
- Protection class IP20 (casinge), IP50 (front)
further information, optional parts and supplies (PDF; 110kb) |
|
Power Factor Control Relay BLR-CM 3-phase
Microprocessor controlled power factor controlled with 3-phase measurement system and display of measurement values
zoom | - Full-automatic c/k-value setting, self adapting, connection of different capacitor step sizes possible
- Capacitors and detected or programmed with values in all three phases. This allows using single-phase or three-phase capacitors in any sequence
- Automatic detection and usage of the optimum capacitor step
- Manual mode possible
- multiple connecting types possible through adjustable phase compensation angle
- Capable for 4-quadrant operation
- Individually configurable discharging time allows quicker switching time
- 3-phase measurement system also suitable for non-sinusodial currents and voltages
- Graphical LCD for display of step status, measurement values and system data
- Measurement display for U, I, P, Q, S, THD U, THD I, ΔQ, F, T
- Harmonic measurement for voltage and current up to the 31. order
- Counter for active and reactive work
- Flexible alarm system with up to 15 alarms
- Programmable digital input and digital output
- Programmable alarm relay with voltfree c/o contact
- Supply voltage 115/230V, 45-65Hz, andere Spannungen auf Anfrage
- Voltage measuring 50 – 530V, 45 – 65Hz
- Current measuring 3 x 15mA – 5A, suitable for CT x/1A und x/5A
- Connection with pluggable screw terminials
- Instument casing for cutout 144 x 144mm, depth 49mm
- Protection class IP20 (casing), IP50 (front)
further information, options and supplies (PDF; 170kb) |
thyristor-switches
Static Contactor BEL-TS
Thyristor switch for rapid switching of capacitors in LV-grid
zoom | - Switching without inrush current, smooth disconnecting
- Rapid switching
- Can be used in chocked capacitor banks and unchocked as well
- Depending on the type for max. voltage 525V or 690V
- Recovery time 20ms
- Voltage level trigger signal 8 - 30V DC
- Protection class IP00
further information, optional parts and supplies (PDF; 220kb) |
monitoring relays
Capacitor Protection Relay KSR
Multi-function capacitor protecting relay for unbalanced supervision of 3-phase capacitor banks in doublestar connection (current unbalance supervision)
zoom | - User guidance with plain text menu
- Measurement data displayed on large LCD display with backlight
- Harmonics measurement up to the 63. harmonic for voltage and current
- Connected to voltage tranformers also suitable for higher voltages
- Integration in networks possible via interface RS485 Modbus RTU (optional)
- Flexible alarm system enables supervision of up to 32 measurement values
- Output relays can be programmed for external alarm
- Voltage measuring mains: 50 – 530V, 45 – 65Hz
- Current measuring unbalance supervision: 4 x 50mA – 5A, suitable for
CT x/1A and x/5A - Connection with screw terminals
- Instrument casing for cutout 144 x 144mm, depth 49mm
- Protection class IP20 (casing), IP50 (Front)
further information, optional parts and supplies (PDF; 200kb) |
power-analyzers
Power Analyzer EMM-4
Multi-function power analyzer for acquisition and analysis of all parameters in 3-phase grids
zoom | - 3-phase measurement with 3- or 4 wire connection
- Operation and parameter input with 4 keys
- User guidance with text menu
- Measurement data displayed on LCD display with backlight
- Harmonics measurement up to the 19. harmonic for voltage and current
- Connected to voltage transformers also suitable for higher voltages
- Interface RS232 on front
- Integration in networks possible via interface RS485 Modbus RTU or RS485 Profibus DP (optional)
- Data logger for measurement data and events via MMC storage card (optional)
- Impulse outputs for active and reactive energy (optional)
- Programmable alarms (optional)
- Measurement and supply voltage 400V +/-10%, 50/60Hz, other voltages on request
- Current measuring suitable for CT x/1A or x/5A
- Connection with pluggable screw terminals
- Instrument casing for cutout 144 x 144mm, depth 62
- Protection class IP20 (casing), IP50 (front)
further information, optional parts and supplies (PDF; 230kb) |
|
Power Analyzer EMM-5
Multi-function power analyzer for acquisition and analysis of all parameters in 3-phase grids
zoom | - 3-phasige measurement with 3- or 4 wire connection
- Operation and parameter input with 4 keys
- User guidance with plain text menu
- Measurement data displayed on large LCD display with backlight
- Harmonics measurement up to the 63. harmonic for voltage and current
- In Verbindung mit Messwandlern auch für höhere Spannungen geeignet
- Connected to voltage transformers also suitable for higher voltages
- Integration in networks possible via interface RS485 Modbus RTU (optional)
- Flexible alarm system enables supervision of up to 32 measurement values
- Output relays (optional) can be programmed for external alarms
- Supply voltage 230V, 45-65Hz, other voltages on request
- Voltage measuring 50 – 530V, 45 – 65Hz
- Current measuring 50mA – 5A, suitable for CT x/1A und x/5A
- Connection with cage clamps
- Instrument casing for cutout 144 x 144mm, depth 49mm
- Protection class IP20 (casing), IP50 (front)
further information, optional parts and supplies(PDF; 360kb) |
SCADA-systems
Web Gateway miniSCADA
Configurable web gateway with integrated web server for direct Ethernet connection of devices with Modbus RTU interface
zoom | - Monitor and control Modbus devices with standard web browser
- Configuration and design of web interface without special tools or HTML editors
- Send alarm messages via or SMS (external modem necessary)
- Data logging of selectable data points
- Can also be used as gateway for protools Modbus RTU/TCP
- Supply voltage 9 – 32V AC/DC
- Casing plastic grey 90 x 70 x 58mm, DIN rail mounting, IP20
further information, optional parts and supplies (PDF; 180kb)
You can see how miniSCADA operates together with BLR-CM and EMM5, when you are using this link:
Demo miniSCADA
Access to miniSCADA is protected by password. Please use this access data: Zugandsdaten:
user: demo password: demo |