SP10 全自動煙點測定儀 ASTM D1322 ASTM D1655

SP10 全自動煙點測定儀 ASTM D1322 ASTM D1655

煙點的測試方法是石油行業中最古老的測試方法之一，也是從未自動化的手動測試方法之一。手動測試要求具有經驗、熟練的技術人員，而且測試很耗時間。
如今試驗中依靠目測作為評定方法的缺點在于受操作人員主觀判斷的限制。目測的方法對實驗人員來說也是非常具有挑戰性和危險性的。
The SP 10 帶來了煙點檢測的新革命。它使用了攝像機觀測火焰并可調節火焰大小的系統。當火焰達到測試方法要求的形狀時，The SP 10 會對火焰高度進行存儲和報告。
優點
1.快速、簡單、實用
2.提高安全性
3. 降低勞動力
4.以更高的精度嚴格模擬手動測試方法
5.非常簡潔的設計

意義和用途
本方法為處在火焰狀態下的煤油和航空渦輪燃料提供了有關發煙性能的指標。煙點與組成這些燃料的碳氫化合物的類型有關。一般情況下，燃料中含有的芳香烴越多，發煙性越大。一個高的煙點表示這種燃料具有較低的發煙趨勢。
煙點很大程度上與燃料燃燒中輻射熱能的熱傳遞有關。因為輻射熱能的傳遞受到燃燒器金屬溫度和其他燃氣渦輪部分發熱區域的強烈影響，而煙點則為這些部件相接觸的燃料提供了相關燃料特性的依據。

原理
The SP 10 采用了以能夠觀測火焰和調整火焰大小驅動器的攝像機為基礎的系統?；鹧娴膱D像是數字化的，而且當火焰的形狀符合測試方法中所要求的時候，有專門的軟件用于確定火焰的高度。這時的火焰是無煙火焰的高度。

技術條件
測試時間: 小于10分鐘
分辨率: 0.1毫米
結果存儲: 于外部設備的容量
局域網連通性: 以太網端口RJ45
打印機輸出: USB(任何打印機)
數據輸出: USB(2)+以太網
尺寸規格(毫米)長x寬x高 : 330 x 390 x 413 (13”x 15”x 16”)
重量： 1010 kg (22 lb)

The smoke point method is one of the oldest test methods in petroleum industry. It is one of the last manual methods that has never been automated before. To be able to run manually this test, it requires high skilled technicians with a long experience and in addition it is time consuming.
The current visual rating method used for specification purposes suffers from the drawback of operator subjectivity. The visual measurement of an open flame is a very challenging exercise and very dangerous for lab personal.
The SP 10 revolutionizes this test. It uses a system that adjusts the size of the flame associated to a video camera that observes the flame. When the flame gets the shape described in the test method, the SP 10 memorizes and reports the height of the flame.
Benefits
1、Quick, easy, and objective rating
2、Increases safety
3、Reduces labor
4、Mimics strictly the manual method with improved precision
5、Very compact design

The SP 10 is an automated instrument that strictly follows the test method with an improved precision. It eliminates the subjectivity inherent to the manual test. The visual rating of the flame varies from one operator to another. Thanks to the digital imaging, the height of the flame which has the shape described in the test method is precisely observed and it is always recorded in the same conditions.In addition, the SP 10 eliminates all safety risks linked to the visual observation of an open flame. The test is carried unattended which drastically reduces labor.
Significance and Use
This test method provides an indication of the relative smoke producing properties of kerosines and aviation turbine fuels in a diffusion flame. The smoke point is related to the hydrocarbon type composition of such fuels. Generally the more aromatic the fuel the smokier the flame. A high smoke point indicates a fuel of low smoke producing tendency.The smoke point is quantitatively related to the potential radiant heat transfer from the combustion products of the fuel. Because radiant heat transfer exerts a strong influence on the metal temperature of combustor liners and other hot section parts of gas turbines, the smoke point provides a basis for correlation of fuel characteristics with the life of these components.
Principle
The SP 10 uses a patented system based on a video camera that observes the flame and an actuator thatadjusts the size of the flame. The flame image is digitalized and the dedicated software determines the height of the flame when its shape corresponds to the one described in the test method. This specific flame is the one with the maximum height without smoke generation.
Technical

specifications [Description]
Test duration: Less than 10 minutes
Resolution: 0.1 mm
Results storage: Limited only to capacity of external device
LAN connectivity:Ethernet port RJ45
Printer output :USB (printer is optional)
Data output :USB (2), Ethernet
Dimensions (mm) W x D x H :330 x 390 x 413 (13”x 15”x 16”)
Weight: 10 kg (22 lb)