工作原理Working principle:
與制粒工藝相配套的組件
Auciliary Parts Related to the Technique of Granulation
物料在鍋中運動及主要傳動圖
Material's Movement¨1 the Pan and Main Transmission Diagram
合適的設備才能取得理想的制粒效果
1、人工加料（標準）
2、通過重力和密閉式加料系統，或通過真空加
料（選件）
3、圓錐形物料槽（標準）轉速可無級調節
4、Z型攪拌槳（標準）轉速可無級調節
5、切割刀l標準）形狀可變，轉速可調
6、頂蓋通過人工打開，有視窗l(fā) HLSG-200-
400為標準件）
7、頂蓋通過人工打開，有視窗I HLSG-50為標
準件）
8、過渡帶l標準）
9、CLP-現場高壓清潔的金屬過濾袋（選件）
10、各種加料口及粘合劑噴射系統（選件）
1 1、用于物料槽、出料口、攪拌槳及切割刀密封
部位、過濾袋的CLP清洗系統l選件）
整個過程由混合、制粒兩個工序組成。
1、 粉狀物料從錐形料斗上方進入物料鍋，待料斗關閉后在混合漿的攪拌下，粉料在容器內作選擇運動，同時物料沿錐形壁方向變
化，逐步生成液橋。在漿葉和壁筒對物料的擠壓、摩擦、捏合的作用下，物料逐步轉變?yōu)槭杷傻牟馁|(zhì)。然后，開啟出料門，濕顆粒在
槳葉離心力作用下推動出料斗。
2、 故這些團粒結構的軟材料不是通過強制擠壓而成粒，而是通過制粒刀的切割．軟材在半流動轉態下被切割成細小而均勻的顆
粒，實現了物料的互相轉變。
The process consists of two programs including mixing and granulation.
1、 Powder metrical can be charged into the material pan from the conical hopper and continue to rotate in the container under
the action of mixing blade once the hopper is closed. In the maanwhile, all materials grow up the shape of liquid bridge under
continuous effects of conical tank wall. Under the action of extrusion, friction as well as crumb by blade and conical tank wall, all
material is gradually turn for loosen. At last, while opening the hopperoutlet, waterish particles are pushed off under the
centrifugal effects of blade.
2． These soft particles are formed not dependent on forced extrusion effects, more exactly; mainly these small and uniform
particles are formed after continuous cutting under the simile-liquid state. The machine can realize the mutnal transformation
between different materials.
技術參數TechnlcaIDate:
型 號Modd HX-50 HX-100 HX-250 HX-300 HX-400 HX-600
工作容量Sawice Capaaly(L) 12-35 25-70 80-120 130-180 150-280 200-400
每批制料【機動）時間Trrraof granulatingrbatch 混合約2分鐘，制粒約7-14分鐘，}比Mixing:2mins g ranulating:7-1 4mins/batch
攪拌機轉速Speed of stimng paddb 25-500 30-250 30-250 30-220 30-200 30-200
攪拌漿馬達功率Powarof stirring pache matortkw) 5.5 7.5 15 18.5 22 30
切割刀轉速Rational speed of alter 50-3000轉，分
切割刀馬達功率Powarof cultar motor(kw) 1.5 3 4 7.5 7.5 1 1
外形尺寸OveraIISiza(YVWHXmm) 1530*620*'980'"1020**1100'*1400*'1550-2550
出料口高度Height of dscharge(mm) 780 920 920 980 1050 1 100
重 量Weight(kg） 3600
采購中心
