螺旋輸送機

-- 工作原理 --

Working principle

螺旋輸送機是醫藥、食品、治金、建材、化工、糧食以及機械加工等部門廣泛應用的一種連續輸送設備。從輸送物料的位移方向的角度劃分,螺旋輸送機分為水平式和垂直式量大類型,主要用于對各種粉狀,顆粒和小塊狀等松散物料的水平輸送和垂直提升。螺旋輸送機與其它輸送設備相比,具有整機截面尺寸小、密封性能好、運行平穩可靠、可中間多點裝料和卸料及操作安全、維修簡便等優點。

Screw conveyor is a kind of continuous conveying equipment which is widely used in medicine food, metallurgy, building materials, chemical industry, grain and mechanical processing departments Divided from the perspective of the direction of displacement of the conveying material, the screw conveyor is divided into horizontal type and vertical type, which is mainly used for horizontal conveying and vertical lifting of loose materials such as various powders, granules and small pieces Compared with other conveying equipment, the screw conveyor has the advantages of small size of the cross section, good sealing performance, stable and reliable operation, multi-point loading and unloading, safe operation, and easy maintenance

-- 技術參數 --

Technical Parameter

以上螺旋的輸送量是在物料為粉體、無磨琢性、水平輸送的條件下得到的**理論數據。選型時需綜合考慮物料種類、物料粒度、磨琢性、粘性、傾角等因素。一般情況下,粒度越大、磨琢性越強、傾角越大,需要的管徑越大。管式的傾角不超過45度,U型槽式的傾角不超過35度。

male The capacity of screw conveyor mentioned above is the maximum theoretical data calculated under the condition that the al is powder and non-abrasive, also in horizontal conveying. Factors such as material type, material size, abrasion, viscosity and inclination should be considered in the process choosing models. In general, the larger particle size and the higher abrasion the inclination angle will be larger, it requires larger pipe diameter. The inclination angle for tubular type screw conveyor should not exceed 45 degrees, and the inclination angle for U-shaped screw conveyor should not exceed 35 degrees.