JN型系列多功能酒精回收濃縮器
JN Series type multiple function alcohol reclamation concentrator
本設備適用于中藥、西藥、葡萄糖、釀酒、淀粉、口服液、化工、食品、味精等工業酒精回收,能用于批量小、品種多的熱敏性低溫真空濃縮。
The device is to concentrate the material in the occasions such as China traditional drug、weat drug、dextrose、amylum sugar、oral liquid、chemistry、foodstuff、monosodium glutamate and vintage and to reclaim the industrial organic solvent such as alcohol.It is suitable to concentrate the thermal sensitive material under lower temperature and vacuum with little batch number and multiple varieties.
技術參數Technology Parameter:
型 號 規 格 | JN-500 JN-1000 JN-1500 |
蒸發量(kg/h) | 500 1000 1500 |
回收酒精濃度(%) | 85 |
回收量(kg/h) | 200 350 500 |
蒸汽壓力(Mpa) | 0.09 |
真空度(Mpa) | -0.08 |
蒸發溫度(℃) | 40-80 |
濃縮比重 | 1.2-1.4 |
設備重量(kg) | 1300 1850 2850 |
長 | 2000 2200 2500 |
外型尺寸(mm) 寬 | 1000 1200 1300 |
高 | 3000 3300 3500 |
容器類別 | 一類 |
設備特點與效益:
1、 酒精回收:回收能力大,采用真空操作方法,改進了設備的工藝流程?;厥章誓苓_到95%,使酒精損耗率低于5%。能耗降低30%,具有投資小,回收效益高的節能設備。
2、 濃縮液料:本設備采用外加熱自然型循環式與真空負壓蒸發方式,能具有蒸發速度快,濃縮比重可達(1.4);液料在全密封中無泡沫濃縮,用本設備濃縮出來的藥液,具有無污染,藥味濃。清洗方便,打開加熱器上下蓋即可。操作簡單,占地面積小,外形美觀,加熱器、蒸發器、保溫完整出廠,本設備與液料接觸部件均采用不銹鋼SUS304制造,保溫采用聚胺脂發泡或珍珠棉,外表面磨砂亞光處理,符合GMP醫藥標準。
1、 Alcohol reclamation:The large reclamation capacity and the vacuum operation mode improve the craft process with a recla-mation rate of alcohol of 95% and a loss rate of alcohol below5% The power consumption lowers for30%,which improves that the device is a energy-saving equipment with economical investment and high reclamation economy profit.
Cocentrated liquid material: The device uses the modes of outer-heated natural cycle and vacuum negative pressure evaporation with concentration proportion of(1.4); The liquid material concen-trates without bubble under full seal state.The drug liquid after concentration by the device features non-contamination and thick drug taste and easy cleaning(it is just to open the up and down cover for cleaning).The device is easy to handle and it needs a little forndation area for install ation.The heater and Evaporator use stainless steel for thermal purpose.The polyurethane or pearl cotton is used as the thermal material.The surface is treated with snd grinding and surface polishing,meeting with the GMP standard.