詳細介紹
【耐壓測試】
輸出電壓 | AC 0~2.5kV/0~5.0kV 2檔量程(平均值計算,有效值顯示) 500VA(額定30分鐘) |
---|---|
電壓設置方法 | 手動設置 |
波形/頻率 | 電源波形, 電源供應同步 |
電流測量范圍 | 0.01~120mA ,平均值整流有效值顯示(數字) |
測量量程 | 2mA/8mA(0.01mA 分辨率), 32mA (0.1mA 分辨率), 120mA (1mA 分辨率) |
判斷功能 | 窗口比較方式 (數字設置) |
【絕緣電阻測試】
測試電壓 | DC500V/1000V,無負載:額定電壓的1倍~1.2倍 |
---|---|
額定測試電流 | 1~ 1.2 mA, 短路電流: 4 ~ 5 mA (500 V時), 2 ~ 3 mA ( 1000 V時) |
測量量程 | 0.5 MΩ~999 MΩ (500V), 1 MΩ~999 MΩ (1000V) : ±4 % rdg., 1000 MΩ~2000 MΩ : ±8 % rdg. |
判斷功能 | 窗口比較方式 (數字設置) |
【計時功能】
設置范圍 | 0.5~999s |
---|---|
監視器功能 | 輸出電壓、檢測電流、測量電壓,監視器周期:2次/s以上 |
電源供應 | 100V AC, (50/60Hz), 800VA |
體積及重量 | 320寬×155高×330厚mm,18kg(3159),21.5kg(3159-02) |
附件 | 高壓測試線 9615(高壓側和回路)×各1,電源線×1,使用說明書×1,備用保險絲×1 |
[Voltage test]
Output Voltage: AC 0-2.5kV/0-5.0kV 2-step range (average calculation, RMS display) 500VA (rated 30 minutes)
Voltage setting method
Waveform/Frequency, Power Supply Synchronization
Current measurements range from 0.01 to 120 mA. Mean rectifier RMS display (digital)
Measurement range: 2mA/8mA (resolution 0.01 mA), 32mA (resolution 0.1 mA), 120mA (resolution 1 mA)
Judgment function: window comparison mode (digital settings)
[Insulation resistance test]
Test voltage DC500V/1000V, no load: 1-1.2 times rated voltage
Rated test current 1-1.2 mA, short circuit current 4-5 mA (500 V), 2-3 mA (1000 V)
The measurement ranges are 0.5 M_~999 M_(500V), 1 M_~999 M_(1000V): +4% rdg., 1000 M_~2000 M_: +8% rdg.
Judgment function: window comparison mode (digital settings)
[Timing function]
Setting range 0.5-999s
Monitor function: output voltage, detection current, measurement voltage, monitor cycle: more than 2 times/s
Power supply
100V AC, (50/60Hz), maximum 800VA
220V AC, 50/60Hz, (3159-02)
Volume and weight: 320 wide x 155 high x 330 thick mm, 18 kg (3159), 21.5 kg (3159-02)
Appendix High Voltage Test Line 9615 (High Voltage Side and Circuit) *1, Power Line *1, Instruction *1, Standby Fuse *1