DPO73304SX高性能示波器

DPO70000SX提供了高達70 GHz模擬帶寬的超高帶寬實時信號采集和分析功能。已獲的異步時序交織(ATI)結構為實時信號采集提供了的噪聲和的保真度。

• 杰出的信號保真度和的信噪比

• 穩定精確的多通道定時，實現最準確的分析能力

• 緊湊的儀器封裝，并能夠靈活地?cái)U(kuò)容及簡便地重新進行配置

簡介

DPO70000SX 系列示波器為超寬帶寬應用提供最準確的實時性能。

• 低噪聲、70 GHz 實時信號捕獲功能，采用已獲的 ATI 結構

• 緊湊的 5 ?" (3U) 儀器封裝，實現了功能泛的多通道系統

• 采用 UltraSync 多臺時間同步總線，提供精確的可擴充的性能

• 的觸發性能，>25 GHz 邊沿觸發帶寬，的包絡觸發功能

• 14.1 Gbps 硬件串行觸發 – 保證在 8b10b 碼型次發生時觸發采集，隔離碼型相關效應

• 誤碼檢測器 - 此功能在觸發系統中執行，針對已定義的模式文件提供簡單的誤碼測量，確定沒有丟失位

低噪聲、高保真信號采集在超高帶寬應用中至關重要，如遠距離相干光通信、400G 數據通信和寬帶 RF。旗艦型 DPO77002SX 采用 ATI（異步時序交織）結構，實現了 70 GHz 和 200 GS/s（5 ps/樣點）實時采集性能。這種已獲的對稱結構本身的噪聲要遠遠優于傳統帶寬交織方法。DPO70000SX 提供了的噪聲、的保真度和的性能，支持進行復雜的光調制分析，對高速串行信令和頻率進行抖動和噪聲分析，對寬帶 RF 信號進行相位和調制分析。

DPO70000SX provides ultra-high bandwidth real-time signal acquisition and analysis functions with up to 70 GHz analog bandwidth. The patented ATI structure provides the lowest noise and highest fidelity for real-time signal acquisition.

Excellent signal fidelity and perfect signal-to-noise ratio

Stable and accurate multi-channel timing to achieve the most accurate analysis capability

Compact instrument package with flexible capacity expansion and easy reconfiguration

Introduction to the

DPO70000SX series oscilloscopes provide the most accurate real-time performance for ultra-widebａnd applications.

Low noise, 70 GHz real-time signal acquisition function, using the patented ATI structure

The compact 5 "(3U) instrument package enables the most versatile multi-channel system

UltraSync time synchronization bus is adopted to provide precise and scalable performance

The highest trigger performance, >25 GHz edge trigger bandwidth, unique envelope trigger function

14.1 Gbps hardware serial trigger -- ensures that acquisition is triggered when the 8b10b code type is specified for the first time to isolate the code type correlation effect

Error detector - this function is performed in the trigger system and provides a simple error measure against the defined pattern file to ensure that no bits are lost

Low noise, high fidelity signal acquisition is very important in ultra-high bandwidth applications, such as long-range coherent optical communication, 400G data communication and broadbａnd RF. Flagship DPO77002SX adopts ATI (asynchronous timing interweaving) structure to achieve real-time acquisition performance of 70 GHz and 200 GS/s (5 ps/ sample). The noise of the patented symmetric structure itself is much better than the traditional bandwidth interleaving method. The DPO70000SX provides the lowest noise, highest fidelity and maximum performance, supporting complex optical modulation analysis, jitter and noise analysis of high-speed serial signaling and frequency, and phase and modulation analysis of broadbａnd RF signals.