Publication 1747-UM011G-EN-P - June 2008
Safety Considerations Safety considerations are an important element of proper system installation. 
Actively thinking about the safety of yourself and others, as well as the 
condition of your equipment, is of primary importance.
Disconnecting Main Power 
Locate the main power disconnect switch where operators and maintenance 
personnel have quick and easy access toit. Ideally, the disconnect switch is 
mounted on the outside of the enclosure,so that it can be accessed without 
opening the enclosure. In addition to disconnecting electrical power, 
de-energize all other sources of power (pneumatic and hydraulic) before 
working on a machine or process controlled by an SLC controller.
Safety Circuits
Circuits installed on the machine for safety reasons, like overtravel limit 
switches, stop push buttons, and interlocks, should always be hard-wired 
directly to the master control relay. These devices must be wired in series so 
that when any one device opens, the master control relay is de-energized 
thereby removing power to the machine. Never alter these circuits to defeat 
their function. Serious injury ormachine damage could result.
Power Distribution
There are some points about power distribution that you should be aware of. 
First, the master control relay must be able to inhibit all machine motion by 
removing power to the machine I/O devices when the relay is de-energized.
Second, if you are using a dc power supply, interrupt the load side rather than 
the ac line power. This avoids the additional delay of power supply turn-on and 
turn-off. The dc power supply should be powered directly from the fused 
secondary of the transformer. Power to the dc input and output circuits is 
connected through a set of master control relay contacts.
Periodic Tests of MasterControl Relay Circuit
Any part can fail, including the switches in a master control relay circuit. The 
failure of one of these switches would most likely cause an open circuit, which 
would be a safe power-off failure. However, if one of these switches shorts 

Control Techniques SKA1100025
Control Techniques SKA1200037
Control Techniques SKBD200110
Control Techniques SKC3400220
Control Techniques SE11200025
Control techniques SE11200037
Control Techniques SE11200055
Control Techniques SE11200075 
Control Techniques SE2D200075
Control Techniques SE23400075
Control Techniques SE23400220 SE 23400220 
Control Techniques SE23400075 380-460
Control Techniques SE23400400
Control Techniques SE2D200150 SE 2D200150 
Control Techniques SE33200550
Control Techniques SE33400550
Control Techniques SE33400750
Control Techniques SE43401500
Control Techniques SE 11200037
Control Techniques SE 53402200 SE-33T

1756-IF6CIS  1756-IF6CIS  1756-IF6CIS  
**********************************************************

全國zui大的備件庫！---------：張可可
選擇zui有權利的公司！-----：
選擇*的質量！--------
選擇的產品！---------
選擇的服務！------------
選擇zui快的貨期！---------------:
選擇*的價格！------------------:

**************************************************************

Control Techniques SM-Universal 
Control techniques SX13400150PB
Control Techniques EP202
Control Techniques EB-202
Control Techniques EN-208
Control techniques EN-204-00-000 P/N 960500-10 Rev: A1
Control Techniques NTE-320-CONS-0000/960760-06
Control Techniques M25R-14ICD M25R14ICD
Control Techniques M350-14ICD
Control Techniques M350R-16ICD M350-16
Control Techniques M45-141CD
Control Techniques M45-14ICD