進口衛生型離心泵

 進口衛生型離心泵 英國進口衛生型離心泵

進口衛生型離心泵 進口衛生型離心泵 英國進口衛生型離心泵概述 Summary
應用現代新技術和新概念不斷革離心泵的生產工藝。新一代衛生級離心泵是英國格林的驕傲。因?yàn)樗朔螱MP要求，傳統的質量外。為用戶提供的泵性能更好，效率更高，使用壽命更長，用戶受益更大。

進口衛生型離心泵特點 Characteristic
屬于渦輪導流離心泵，可以在負壓0.09Mpa壓力下，抽取真空罐里的液體。在處理過程中滿足衛生要求，柔和不損傷物料，并具抗化學物性能強光泵業所有與物料接觸的部分均使用SUS304,SUS316L的材質。其標準配置包括外殼和泵腳。衛生級自吸泵是在標準離心泵基礎上設計的高壓泵，適用于高進口壓力場合，可承受高達40bar 的進口壓力。本泵是設計開式葉輪,內部鏡面拋光、*、清洗后無滯留物、噪音低。
規　　格：3T－180T, 0.75KW-75KW
材　　質：SUS304 SUS316L (在材料的選用上泵體、泵蓋、葉輪等凡與物料接觸之零件由SUS316L或SUSI304不銹鋼制造)
標　　準：DIN、 SMS
葉　　輪：分開式葉輪和半閉式葉輪。
表面處理：接液部分拋光，其余亞光或噴砂處理。
工作條件：衛生離心泵屬高低液位幾水平輸送，有一定吸力。 
zui大進口壓力：0.5MPa
溫度范圍：-10°C至+140°C(EPDM)
可沖洗機械密封：
水壓：zui高0.1MPa
水量：0.25-0.5L/min
進口衛生型離心泵電機Electric machinery：
1．根據配置主要采用“ABB,西門子,東元”品牌的三相交流電機，按照電工委員會IEC60034.IEC60072標準設計制作，符合歐共體“CE”標記要求。
2、可供選用防爆電機，以滿足不同場合的需要。
3、*的電氣性能、低噪音、低震動，電機的標準設計防護等級為IP55，絕緣等級為F級。
4、工作電壓：
≤3Kw,220-240V/380-420V,△/Y
＞3Kw,380-420V/660-690V,△/Y
5、頻率：50Hz/60Hz
6、工作方式：連續（SI）
7、轉速：標準泵的轉速為2900r/min
 
進口衛生型離心泵應用Application:
 
藥品類:輸液，蒸餾水，高純水，含顆粒3-6毫米的中藥液體，浸出液；化妝品類:染料，酒精，香精油；乳品類:乳清，奶油，牛奶，糖液；飲料類:酒精，白酒，啤酒，麥芽汁， 發酵液，果汁飲料，帶顆粒飲料；其它:糖果業，焙烤業，化工領域等。

進口衛生型離心泵guan網：http://www.twvalve。。ｎｅｔ/html/3131.html

Imported sanitary centrifugal pump

Imported sanitary centrifugal pump imported from the UK health type centrifugal pump

Imported sanitary centrifugal pump imported sanitary centrifugal pump imported from the UK health overview of Summary type centrifugal pump

The application of modern new technology and new concept to the production of centrifugal pump. A new generation of sanitary centrifugal pump is the pride of Green. Because it is in line with the requirements of GMP, the traditional quality. To provide users with better pump performance, higher efficiency, longer service life, users benefit more.

Characteristics of imported sanitary centrifugal pump Characteristic

The utility model relates to a centrifugal pump with a turbine diversion, which can extract liquid in a vacuum tank under the negative pressure of 0.09Mpa. In the treatment process to meet the health requirements, soft without damage to the material, and has anti chemical properties of the pump all the materials and parts are used SUS304, SUS316L material. The standard configuration includes the shell and the pump foot. Sanitary self priming pump is designed on the basis of the standard centrifugal pump high-pressure pump, suitable for high inlet pressure, can withstand up to 40bar of the inlet pressure. The pump is designed to open impeller, the internal mirror polishing, no dead ends, no residue after cleaning, low noise.

Specification: 3T180T, 0.75KW-75KW

Material: SUS304 SUS316L (in the selection of materials of the pump body, pump cover, impeller and other parts all contact with the material of stainless steel made by SUS316L or SUSI304)

Standard: DIN, SMS

Impeller: separate impeller and semi closed impeller.

Surface treatment: wetted parts polishing, the matte or sandblasting.

Working conditions: sanitary centrifugal pump is a level of high and low level of transport, there is a certain suction.  

Maximum inlet pressure: 0.5MPa

Temperature range: -10 degrees C to +140 degrees C (EPDM)

Washable mechanical seal:

Hydraulic pressure: maximum 0.1MPa

Water: 0.25-0.5L/min

Imported sanitary centrifugal pump motor Electric machinery:

1 according to the configuration of the main "ABB, SIEMENS, East yuan" brand three-phase AC motor, in accordance with the International Electrotechnical Commission IEC60034.IEC60072 standard design, in line with the EC "CE" marking requirements.

2, explosion-proof motor can be used to meet the needs of different occasions.

3, superior electrical performance, low noise, low vibration, the standard design of motor protection class IP55, insulation class F.

4, working voltage:

3Kw, 220-240V/380-420V, /Y

3Kw, 380-420V/660-690V, /Y

5, frequency: 50Hz/60Hz

6, working mode: continuous (SI)

7, speed: standard pump speed of 2900r/min

Application of imported sanitary centrifugal pump Application:

Drugs: the infusion, distilled water, high pure water, liquid medicine containing particles, 3-6 mm lixivium; cosmetics: dye, alcohol, essential oils; dairy products: whey, cream, milk, sugar; drinks: alcohol, liquor, beer, malt juice, fermentation broth, juice drinks, beverages with particles; other: the candy industry, baking industry, chemical industry etc..

Imported sanitary centrifugal pump Guan net: http://www.twvalve。。ｎｅｔ/html/3131.html

英國格林代理商上海凡而閥門有限公司，咨詢：

英國格林相關領域業績：杭州地鐵1號線、杭州地鐵2號線、杭州地鐵4號線，南京地鐵1號線、南京地鐵2號線、南京地鐵3號線、南京地鐵4號線、南京地鐵10號線。

帝國化學工業、美國科氏工業、美國聯合能源、艾默生電氣、盧克石油、中國海洋石油。

Green field performance: Hangzhou Metro Line 1, Hangzhou Metro Line 2, Hangzhou Metro Line 4, Nanjing Metro Line 1, Nanjing Metro Line 2, Nanjing Metro Line 3, Nanjing Metro Line 4, Nanjing Metro Line 10.

Imperial chemical industries, the United States of America, the United States, Emerson, Luke electric, China National Offshore oil.