進口離心油泵美國離心油泵

進口離心油泵工作原理:

葉輪安裝在泵殼內，并緊固在泵軸上，泵軸由電機直接帶動。泵殼*有一液體吸入與吸入管連接。液體經底閥6和吸入管進入泵內。泵殼上的液體排出口與排出管連接。在離心泵啟動前，泵殼內灌滿被輸送的液體；啟動后，啟動后，葉輪由軸帶動高速轉動，葉片間的液體也必須隨著轉動。在離心力的作用下，液體從葉輪中心被拋向外緣并獲得能量，以高速離開葉輪外緣進入蝸形泵殼。

離心油泵的主要過流部件有吸水室、葉輪和壓水室。吸水室位于葉輪的進水口前面，起到把液體引向葉輪的作用；壓水室主要有螺旋形壓水室(蝸殼式)、導葉和空間導葉三種形式；葉輪是泵的zui重要的工作元件，是過流部件的心臟，葉輪由蓋板和中間的葉片組成。

進口離心油泵應用領域：

用來輸送汽油、煤油、柴油，航空煤油等石油產品。介質溫度在-20℃～+80℃，是一種優良的船用裝卸油泵。并適用于陸地油庫、油罐車等儲油裝置的油料輸送。也可以用來輸送海水、淡水等。

進口離心油泵技術參數：

流量：6.25-500m?/h; 揚程：13-650m;   功率：2.2-400KW;   轉速：1450-2950r/min;
口徑：φ50-φ300;     溫度范圍：≤105℃;    工作壓力：≤3.0Mpa；  材質：鑄鐵、鑄鋼
臥式多級離心油泵系單吸多級分段式離心泵，供輸送油品及物理化學性質類似于油品的液體之用。

進口離心油泵美國泰樂TYLER售后服務：
1、按合同要求提供產品的合格證、銘牌、檢驗報告、產地證名、安裝說明書等。
2、顧客在驗收產品過程中，如出現與合同要求不符時，我司接到顧客通知后兩小時內給予處理。
3、我司提供十二個月以上產品質保期，時間從驗收合格之日起計算。
4、在正確安裝和使用下，出現產品質量問題，本公司將負責到底。

Centrifugal oil pump

Working principle of imported centrifugal pump:

The impeller is installed in the pump shell and is fastened on the pump shaft. The central part of the pump casing is connected with a liquid suction pipe. The liquid through the bottom valve 6 and the suction tube into the pump. The liquid discharge port on the pump casing is connected with the discharge pipe. Before the start of the centrifugal pump, the pump shell is filled with the liquid to be delivered; after the start, start, the impeller driven by the high-speed rotation of the shaft, the liquid between the blades must also be with the rotation. Under the action of centrifugal force, the liquid was thrown from the impeller center and outer edge of the energy leaving the impeller at high speed into the outer pump shell shaped cochlea.

The main components of centrifugal oil pump are suction chamber, impeller and pressure chamber. The front room is located on the water inlet of the impeller to the liquid into the impeller; the pressurized water chamber main spiral water pressure chamber (spiral), guide vane and guide vane three forms; the impeller is the most important work element pump, is the heart of the flow passage components, impeller cover and blade by an intermediate.

Application of imported centrifugal pump:

Used to transport gasoline, kerosene, diesel oil, aviation kerosene and other petroleum products. The utility model has the advantages that the medium temperature is -20 DEG C to +80 DEG C, and is an excellent ship loading and unloading oil pump. The utility model is suitable for the oil transportation of the oil storage devices such as land storage tanks and oil tanks. Can also be used to transport sea water, fresh water, etc..

Technical parameters of imported centrifugal pump:

Flow: 6.25-500m? /h; head: 13-650m; power: 2.2-400KW; speed: 1450-2950r/min;

Diameter: 50-. 300; temperature range: less than or equal to 105 DEG C; working pressure: 3.0Mpa; material: cast iron, cast steel

The utility model relates to a horizontal multi-stage centrifugal oil pump, which is a single suction multi-stage centrifugal pump, which is used for transporting oil and the physical and chemical properties similar to the liquid of oil.

The United States imported centrifugal pump TYLER Taylor customer service service:

1, according to the contract requirements for product certification, nameplate, inspection report, certificate of origin, installation instructions etc..

2, the customer in the process of acceptance of the product, such as the emergence of the contract requirements and inconsistent, I received the notification of the customer within two hours after the treatment.

3, our company provides more than twelve months warranty period, the time from the date of acceptance.

4, in the correct installation and use, product quality problems, the company will be responsible in the end.

客戶須知：

詢問美國泰樂TYLER電磁閥一級代理商。銷售一部（上海凡而閥門有限公司），參數提供如下：

1.公稱通徑2、公稱壓力3、流體性質（包括溫度、介質） 4.材質 5.連接方式 6電源.電壓7、控制方式（常開式、常閉式、自保持式）.8、防護形式（防爆型、防水型、防塵型、防潮型、防腐型、普通型）

美國泰樂相關領域業績：杭州地鐵1號線、杭州地鐵2號線、杭州地鐵4號線，南京地鐵1號線、南京地鐵2號線、南京地鐵3號線、南京地鐵4號線、南京地鐵10號線。

帝國化學工業、美國科氏工業、美國聯合能源、艾默生電氣、盧克石油、中國海洋石油。

美國泰樂代理商上海凡而閥門有限公司，咨詢：

Customer information:

Welcome to inquire us Taylor TYLER solenoid valve agents. Sales of a (Shanghai and valve Co., Ltd.), the parameters are provided as follows:

1 nominal diameter, nominal pressure 3, 2 fluid properties (including temperature, medium) 5 connection 4 material 6 power. 7, voltage control mode (normally open and normally closed, self retaining.8), protection (explosion-proof, waterproof, dustproof, moistureproof and anticorrosive type type type, ordinary type)

The United States Taylor related field performance: Hangzhou Metro Line 1, Hangzhou Metro Line 2, Hangzhou Metro Line 4, Nanjing Metro Line 1, Nanjing Metro Line 2, Nanjing Metro Line 3, Nanjing Metro Line 4, Nanjing Metro Line 10.

Imperial chemical industries, the United States of America, the United States, Emerson, Luke electric, China National Offshore oil.

The United States and Shanghai where agents Taylor Valve Co. Ltd., consulting:

 進口離心油泵guan網：http://www.twvalve。。ｎｅｔ/html/2175.html