進口單級立式軸流泵美國單級立式軸流泵

進口單級立式軸流泵產品參數：

流量：300～220000m3/h
揚程：1.0m～10m
口徑：250m～4500mm　
轉速：370～1450r/min
功率：5.5～1250kw
介質溫度：≤50℃
電機電壓：380V～10000V

進口單級立式軸流泵產品用途：

適于吸送清水或物理及化學性質類似水的其它的液體之用，吸送液體的zui高溫度為50℃，之用供農田排灌、工業熱電站輸送循環水、城市給排水、船塢升降水位或其它水利工程用水，使用范圍十分廣泛。

進口單級立式軸流泵結構型式：

對于立式軸流泵，泵和電機分別安裝在兩個基礎層，泵的軸向推力由電機承受，泵的軸承為橡膠導軸承，密封為填料密封。對于臥式（斜式）軸.流泵，整個泵系統由水力流道、泵本體、傳動、電機和輔助設備等幾部分組成。傳動部分為齒輪減速

進口單級立式軸流泵工作原理：

進口單級立式軸流泵以單級立式軸流泵運用zui廣泛，此種泵是一種大流量、低揚程的泵，可抽送40℃以下的清水或雨水、江河水、污水及類似于清水的其它液體介質?？捎糜谵r業排灌、城市給排水、熱電站輸送循環水或其他水利工程之用。立式軸流泵的工作原理與構造 1、立式軸流泵的工作原理  立式軸流泵是以空氣動力學中，機翼的升力理論為基礎。當流體繞過翼型時，在翼型的首端點處分離成為兩股流，它們分別經過翼型的上表面和下表面，然后同時在翼型的尾端匯合，由于沿翼型下表面的路程比上表面路程長一些，流體沿翼型下表面的流速要比沿翼型上表面流速大，相應的，翼型下表面的壓力將小于上表面，流體對翼型有一個向下的作用力，同樣，翼型對于流體也將產生一個反作用力，與此作用力相等，方向相反，作用在流體上，在此力作用下，水就被壓升到一定的高度上去。

美國泰樂TYLER進口單級立式軸流泵售后服務：

用戶*，信譽*，優質、完善的售后服務是我們產品價值的延伸和對客戶利益的重要保證，我公司服務質量管理體系的宗旨是：建立并不斷完善科學、合理、高效的服務質量管理體系，公正、準確、及時地完成客戶的售后服務質量保障工作，為我公司的客戶服務建立良好、全面、充分的服務體系。

Single stage vertical axial flow pump, single stage vertical axial flow pump

Imported single stage vertical axial flow pump:

Flow: 300 ~ 220000m3/h

Head: 1.0m ~ 10m

Caliber: 250m ~ 4500mm

Speed: 370 ~ 1450r/min

Power: 5.5 ~ 1250KW

Medium temperature: less than or equal to 50 DEG C

Motor voltage: 380V ~ 10000V

Imported single stage vertical axial flow pump:

Suitable for pumping water or similar physical and chemical properties of water and other liquids with suction, the highest temperature is 50 DEG C to the liquid, used for farmland irrigation, industrial circulating water supply, power station City water supply and drainage, water or other water conservancy dock lifting water, use ten points wide.

Structure of imported single stage vertical axial flow pump:

For the vertical axial flow pump, the pump and the motor are respectively installed on two basic layers, the axial thrust of the pump is controlled by the motor, and the bearing of the pump is a rubber guide bearing. For the horizontal (oblique) axis, the flow pump, the entire pump system consists of hydraulic flow, pump body, transmission, motor and auxiliary equipment, etc.. Transmission part for gear deceleration

Working principle of imported single stage vertical axial flow pump:

The import of single-stage vertical axial flow pump with single stage axial flow pump is the most widely used, this pump is a large flow and low lift pump, capable of pumping 40 degrees Celsius water or rainwater, river water, sewage and similar to water and other liquids. Can be used for agricultural irrigation and drainage, city power station circulating water supply or other water conservancy projects in the. The working principle and structure of vertical axial flow pump 1. The working principle of vertical axial flow pump. When the fluid around the airfoil, the first end airfoil separated into two streams, respectively through the upper surface and the lower surface of the airfoil, and at the same time in the end surface of the airfoil confluence, along the distance is longer than the airfoil on the journey to the surface along the surface of the airfoil, fluid flow velocity than along the airfoil the surface, the surface of the airfoil under pressure will be less than on the surface of fluid with a downward force on the same airfoil, airfoil for fluid will also produce a reaction, and the force is equal to the opposite direction, in the flow, this force, water pressure was up to a certain height.

The United States imported TYLER tylosin Single-stage vertical axial flow pump customer service service:

Customer first, reputation first, customer service quality, perfect service is the important guarantee of our products and to extend the value of the interests of customers, our service tenet is: quality management system, establish and improve the service quality management system is scientific, reasonable and efficient, fair, accurate and timely completion of customer service and customer service quality assurance the establishment of good, comprehensive, full service system for my company's customer service.

客戶須知：

詢問美國泰樂TYLER電磁閥一級代理商。銷售一部（上海凡而閥門有限公司），參數提供如下：

1.公稱通徑2、公稱壓力3、流體性質（包括溫度、介質） 4.材質 5.連接方式 6電源.電壓7、控制方式（常開式、常閉式、自保持式）.8、防護形式（防爆型、防水型、防塵型、防潮型、防腐型、普通型）

美國泰樂相關領域業績：杭州地鐵1號線、杭州地鐵2號線、杭州地鐵4號線，南京地鐵1號線、南京地鐵2號線、南京地鐵3號線、南京地鐵4號線、南京地鐵10號線。

帝國化學工業、美國科氏工業、美國聯合能源、艾默生電氣、盧克石油、中國海洋石油。

美國泰樂代理商上海凡而閥門有限公司，咨詢：

Customer information:

Welcome to inquire us Taylor TYLER solenoid valve agents. Sales of a (Shanghai and valve Co., Ltd.), the parameters are provided as follows:

1 nominal diameter, nominal pressure 3, 2 fluid properties (including temperature, medium) 5 connection 4 material 6 power. 7, voltage control mode (normally open and normally closed, self retaining.8), protection (explosion-proof, waterproof, dustproof, moistureproof and anticorrosive type type type, ordinary type)

The United States Taylor related field performance: Hangzhou Metro Line 1, Hangzhou Metro Line 2, Hangzhou Metro Line 4, Nanjing Metro Line 1, Nanjing Metro Line 2, Nanjing Metro Line 3, Nanjing Metro Line 4, Nanjing Metro Line 10.

Imperial chemical industries, the United States of America, the United States, Emerson, Luke electric, China National Offshore oil.

The United States and Shanghai where agents Taylor Valve Co. Ltd., consulting:

進口單級立式軸流泵guan網：http://www.twvalve。。ｎｅｔ/html/2316.html