德國進口高壓柱塞泵

德國進口高壓柱塞泵 進口高壓柱塞泵廠家 進口高壓柱塞泵價格High pressure piston pump

德國KAYSEN凱森進口高壓柱塞泵概述
高壓柱塞泵的使用壓力一般應在10MPa～100MPa之間。它屬于容積式泵，借助工作腔里的容積周期性變化來達到輸送液體的目的；原動機的機械能經泵直接轉化為輸送液體的壓力能；泵的容量只取決于工作腔容積變化值及其在單位時間內的變化次數，理論上與排出壓力無關。往復泵是借助于活塞在液缸工作腔內的往復運動（或通過隔膜、波紋管等撓性元件在工作腔內的周期性彈性變形）來使工作腔容積產生周期性變化的。在結構上，往復泵的工作腔是借助密封裝置與外界隔開，通過泵閥（吸入閥和排出閥）與管路溝通或閉合。

主要特點：

●瞬時流量是脈動的

這是因?yàn)樵谥弥?，液體介質的吸入和排出過程是交替進行的，而且活塞在位移過程中，其速度又在不斷地變化之中。在只有一個工作腔的泵中，泵的瞬時流量不僅隨時間而變化，而且是不連續的。隨著工作腔的增多，瞬時流量的脈動幅度越來越小，乃至在實用上可以認為是紊流。

●平均流量是恒定的

理論上，泵的流量只取決于泵的主要結構參數　n（每分鐘往復次數）、S（活塞行程）、D（活塞直徑）、Z（活塞數目），與排出壓力無關，且與輸送介質的溫度、粘度等物理、化學性質無關。所以說泵的流量是恒定的。

●泵的壓力取決于管道特性

柱塞泵的排出壓力不能由泵本身限定，而是取決于泵裝置的管道特性，并且與流量無關。也就是說，如果認為輸送液體是不可壓縮的，那么，在理論上可認為往復泵的排出壓力將不受任何限制，即可根據泵裝置的管道特性，建立泵的任何所需的排出壓力。當然，所有往復泵都有一個泵的排出壓力的規定，這不是說該泵的排出壓力不會再升高，而只是說，由于原動機額定功率和泵本身的結構強度的限制，不允許在超出這一排出壓力下使用而己。

●對輸送介質有較強的適應性

柱塞泵原則上可以輸送任何介質，幾乎不受介質的物理性能和化學性能的限制。當然，由于液力端的材料和制造工藝以及密封技術的限制，有時也會遇到不能適應的情況。

●有良好的自吸性能

柱塞泵不僅有良好的吸入性能，而且還有良好的自吸性能。因此，對多數往復泵來說，在啟動前通常不需灌泵。 機器效率高，節能。

主要優點：

●效率高

●耐壓高

●壽命長

●傳輸功率大

●轉速范圍寬

●有良好的自吸性能

主要應用：

●重型刨床

●液壓機

●工程機械

●船舶

●礦山冶金機械

●能源礦山開采

●石油精細化工

●食品藥品加工

Germany KAYSEN imported high pressure piston pump overview
The pressure of the high-pressure piston pump should generally be between 10MPa and 100MPa. It belongs to the positive displacement pump, with the working chamber in the volume of cyclical changes to achieve the purpose of transporting the liquid; the original machine mechanical energy pump directly into the transmission of liquid pressure energy; pump capacity depends only on the working chamber volume changes and its The number of changes in unit time is theoretically independent of discharge pressure. The reciprocating pump causes the working chamber volume to periodically change by means of the reciprocating motion of the piston in the cylinder operating chamber (or by periodic elastic deformation of the flexible element such as a diaphragm, bellows or the like in the working chamber). In the structure, the reciprocating pump working chamber is separated from the outside by means of a sealing device, through the valve (suction valve and discharge valve) to communicate with the pipeline or closed.

main feature: 

● Instantaneous flow is pulsating
This is because in the plunger pump, the liquid medium inhalation and discharge process is alternating, and the piston in the displacement process, the speed is constantly changing. In a pump with only one working chamber, the instantaneous flow of the pump varies not only with time but also in a discontinuous manner. With the increase in the working chamber, the instantaneous flow rate of the pulse is getting smaller and smaller, and even in practice can be considered turbulent.
● The average flow rate is constant
In theory, the flow of the pump depends only on the main structural parameters n (reciprocating times per minute), S (piston stroke), D (piston diameter), Z (number of pistons), regardless of discharge pressure, Temperature, viscosity and other physical and chemical properties have nothing to do. So the flow of the pump is constant.
● The pressure of the pump depends on the pipe characteristics
The discharge pressure of the plunger pump can not be limited by the pump itself, but depends on the piping characteristics of the pump device and is independent of the flow rate. That is, if it is considered that the delivery liquid is incompressible, it is theoretically believed that the discharge pressure of the reciprocating pump will be free from any restriction and any desired discharge pressure of the pump may be established in accordance with the pipe characteristics of the pump unit. Of course, all reciprocating pumps have a pump discharge pressure requirement, which is not to say that the pump's discharge pressure will not rise again, but only that, due to the prime mover rated power and the structural strength of the pump itself is not allowed Beyond the use of this discharge pressure.
● Strong adaptability to the conveying medium
Piston pumps can in principle deliver any medium, almost free of physical and chemical properties of the media. Of course, due to the hydraulic end of the material and manufacturing process and sealing technology constraints, and sometimes can not meet the situation.
● have good self-priming performance
Piston pump not only has good inhalation performance, but also good self-priming performance. Therefore, for most reciprocating pumps, there is usually no need to pump before starting. Machine efficiency is high, energy saving.

Key Benefits:

● High efficiency
● High pressure
● long life
● Transmission power is large
● Wide speed range
● have good self-priming performance

main application:

● heavy planer
● hydraulic press
● Construction machinery
● ship
Mine Metallurgical Machinery
Energy mine mining
● petroleum fine chemical industry
● Food and drug processing

德國進口高壓柱塞泵 進口高壓柱塞泵廠家 進口高壓柱塞泵價格

德國KAYSEN凱森對您的承諾：

●放心的質量：從鑄件到產品，實行全過程質量監控，*檢測，責任到人！

●貼心的價格：高效成本控制，自產自銷，減少中間環節，讓利于客戶！

●快速的貨期：充足的庫存，上海便捷物流，縮短交貨期，嚴格按照合同期交貨！

Germany Kaysen commitment to you:

● Reliable quality: from casting to the product, the implementation of the whole process of quality control, all-round detection, responsibility to the people!

● intimate price: efficient cost control, production for sale, to reduce the intermediate links, to help customers!

● fast delivery: adequate inventory, Shanghai convenient logistics, shorten the delivery time, in strict accordance with the contract delivery!

進口高壓柱塞泵廠家 進口高壓柱塞泵價格