※真空下物料溶液的沸點降低，是蒸發器的傳熱推動力增大，因此對一定的傳熱量可以節省蒸發器的傳熱面積；
※ 蒸發操作的熱源可以采用低壓蒸汽或廢熱蒸汽（用戶特殊要求選用水或油加熱，廠方可為你專門設計。）
※ 適用于在高溫下易分解，聚合和變質的熱敏性物料的干燥；
※ 在干燥前可進行消毒處理，干燥過程中任何不純物均無混入；
※ 由于是靜態式真空干燥器，故干燥物料的形體不會損壞。

※ Under the condition of vacuum, the boiling point of material solution will be reduce. It will increase impetus for heat and mass exchange. Therefore for certain heat exchange amount, it can save heat exchange area of evaporator.
※ The heat source for evaporating operation may be low pressure steam or waster heat steam （If having special requirement, customer may choose water or oil to heat. Our factory can design specially for you）.
※ Heat loss of evaporator may be reduced.
※ Suitable for drying thermal sensitive material that is easy to decompose, polymerize or denature.
※ Before drying, it can carry out disinfections. During the period of drying, any impurity cannot be mixed into it.
※ It is static vacuum dryer, the form and structure of material to be dried and cannot be damaged.

★技術參數:Technical Data

規格 Specification	YZG-600	YZG-1000	YZG-1400	FZG-15
干燥箱內尺寸（㎜） Inner size of drying chamber	φ 600X976	φ 1000X1527	φ 1400X2054	φ1500X1400X1220
干燥箱外尺寸（㎜） Outer size of drying chamber	1135X810X1020	1692X1190X1500	2386X1675X1920	1513X1924X2060
烘架層數 Layer amount of baking frame	4	6	8	8
層間距離（㎜） Distance between layers	81	102	102	122
烘盤尺寸（㎜） Size of baking disk	310X600X45	460X640X45	460X640X45	460X640X45
烘盤數 Qty of baking disk	4	12	32	32
烘盤管內使用壓力 Pressure used in pipe of baking disk	≤ 0.784（8kg/cm）	0.784	≤ 0.784	≤ 0.784
烘架使用溫度（ ℃ ） Top baking frame to be used	35-150	35-150	35-150	35-150
箱內空載真空度（ MPa ） Vacuum in idle in chamber	≤ 0.098	≤ 0.098	≤ 0.098	≤ 0.098
用冷凝器時，真空泵型號 When use condensator, model and power of vacuum pump	2X-15A 2Kw	2X-30A 3Kw	2X-70A 5.5Kw	2X-70A 7Kw
不用冷凝器時，真空泵型號 When not use condensator, model and power of vacuum pump	SK-0.8 2.2Kw	SK-3 5.5Kw	SK-3 5.5Kw	SK-3 5.5Kw
干燥箱重量（ kg ） Weight of drying chamber	250	800	1400	2100