游離三碘甲狀腺原氨酸（fT3）檢測試劑盒（血清）

游離三碘甲狀腺原氨酸（fT3）檢測試劑盒（血清）齊一生物科技有限公司主要經營進口原裝Elisa試劑盒，國產ELISA試劑盒，進口分裝ELISA試劑盒，ELISA檢測試劑盒種類齊全，價格實惠，購買齊一生物科技有限公司產品的新老客戶，可享免費代測實驗服務，可檢測人源，小鼠，大鼠，豬，狗，猴，兔，羊，雞，牛，鴨子，魚，植物等各種樣本.全程提供.如需其他Elisa試劑盒說明書及報價，可齊一

游離三碘甲狀腺原氨酸（fT3）檢測試劑盒（血清）標本的采集及保存：
1.血清：室溫血液自然凝固10-20分鐘后，離心20分鐘左右（2000-3000轉/分）。仔細收集上清。保存  過程 中  如有沉淀形成，應再次離心。
2.血漿：應根據標本的要求選擇EDTA、檸檬酸鈉或肝素作為抗凝劑，混合10-20分鐘后，離心20分鐘左右（2000-3000轉/分）。仔細收集上清。保存過程中如有沉淀形成，應再次離心。
3.尿液：用無菌管收集。離心20分鐘左右（2000-3000轉/分）。仔細收集上清。保存過程中如有沉淀形成，應再次離心。胸腹水、腦脊液參照此實行。
4.細胞培養上清：檢測分泌性的成份時，用無菌管收集。離心20分鐘左右（2000-3000轉/ 分）。仔細收集上清。  檢測細胞內的成份時，用PBS（PH7.2-7.4）稀釋細胞懸液，細胞濃度達到100萬/ml左右。通過反復凍融，以 使細胞破壞并 放出細胞內成份。離心20分鐘左右（2000-3000轉/分）。仔細收集上清。保存過程中如有沉淀形成，應再次離心。
5.組織標本：切割標本后，稱取重量。加入一定量的PBS，PH7.4。用液氮迅速冷凍保存?zhèn)溆谩吮救诨笕匀槐３?-8℃的溫度。加入一定量的PBS（PH7.4），用手工或勻漿器將標本勻漿充分。離心20分鐘左右（2000-3000轉/分）。仔細收集上清。分裝后一份待檢測，其余冷凍備用。

9019501    GEL LOADER ASSY GS    
9019478    GEL CRACKER GS    
9238887    Cable, Heat, BS96    
9238835    #BioSprint15, Basic Agreement, no PM    The Basic Cover Agreement BioSprint 15 provides full service coverage for the BioSprint 15. Costs for service visits are fully covered including travel, labor, and parts. With a Basic Cover Agreement, the response time is 5 working days.
9241216    Full Agreement Depot Repair, DCR-1, 1yr    "The Full Agreement Depot Repair, DCR-1 provides full service coverage for the DCR-1 luminometer used in the digene HPV application. The service is conducted as an instrument exchange service. 
All shipping, labor and repair part costs related to an instrument exchange are included for 1 year. Instrument exchange time is 2 - 3 working days."
9241184    Sensor, Z, with cable, QX    
9241181    Holder, sample plate, QX    
9238834    #Basic Cover Agreement 9604, 2PM, 1yr    The Basic Cover Agreement 9604, 2 PM provides full service coverage for the BioRobot 9604. Costs for service visits are fully covered including travel, labor, and parts. The agreement also includes two annual preventive maintenance visits, with costs for labor and parts covered. With a Basic Cover Agreement, the response time is 5 working days.
9237176    Bar Code Reader    
9014514    X-Drive, Complete, BR8, RD    
9014501    Vertical Tip Disposal Slide    
9022324    Power Supply, Shaker, careHPV    
9022322    Power Supply, Controller, careHPV    
9022121    Tool. Rotor Hub Height Jig, RGQ    
9021404    RGQ MDx User manuals for IVD use(Europe)    
9238610    Collet chuck    
9238479    Motor, syringe, RapidPlate    
9238152    Elution Microplate Adapter 8000, SBS    
9237932    Syringe, 100μl    
9240663    Nut, Flangeless,1/4-28, Black, AP    
9240634    Power Supply, Main PCB, Aztec, AP196/98    
9240630    Power Supply, 5VDC 1.5 AMP, AP96    
9240593    Unload Valve, Pump, Pressure, AP196/98    
9240562    Fuse, PCB, 315, Eppendorf, AP196/98    
9240536    Motor Assy, SiNug, 17, All, AP96/196    
9240514    CD R/W, AP196/98    
9240504    PC-104, AP98    
9240346    Autopure, Full Agreement    "Repair service delivery: onsite
Service response time (repair): 48 hours/2 business days
Periodic inspection/maintenance: yes, 1/agreement year
Inspection/maintenance delivery: onsite
Cost coverage for repair parts: yes, included
Cost coverage for labor: yes, included
Cost coverage for travel: yes, included
Replacement system (Loaner) provision: not included
Transportation cost coverage: not applicable"
9240098    Re-Installation, BR EZ1    The Re-Installation, BR EZ1 facilitates quick implementation of system back into lab routine by minimizing  instrument set-up phase. It covers hardware and software check of instrument and provides user with operator refesher overview.  Re-installation includes labor and travel costs. Re-installation performance process is documented on a GMP/GLP-pliant Field Service document.
9239852    Foot bumpers,  v2.0 (4)    
9019944    Cable, P-axis, wires, 8 ch. , C18    
9238880    Bearings up. & low, BS96    
9238836    BioSprint96, Basic Agreement, no PM    "Repair service delivery: onsite
Service response time (repair): 5 business days
Periodic inspection/maintenance: not included
Inspection/maintenance delivery: not applicable
Cost coverage for Repair Parts : yes, full coverage
Cost coverage for labor: yes, full coverage
Cost coverage for travel: yes, full coverage
Replacement system (Loaner) provision: not applicable
Transportation cost coverage: not applicable"
9241211    Full Agreement Depot Repair, DML2000, 1y    "The Full Agreement Depot Repair, DML2000 provides full service coverage for the DML 2000 luminometer. The service is conducted as an instrument exchange service. 
All shipping, labor and repair part costs related to an instrument exchange are included for 1 year. Instrument exchange time is 2 - 3 working days."
9241191    Magnet, tool, QX    
9238825    Spare bucket for plate rotor    
9238815    Rect. carrier for 12 tubes 10 ml w/ cap    
9019472    TAPE SPACER CLEAR GS    
9019464    UV tube, Cxx    
9243650    Comprehen Valid., EZ1/QIAcube/QIAsymph    """The Comprehensive Validation Support plan specific to a laboratory's needs will incorporate all of the requirements for the internal validation guidelines from the FBI's Quality Assurance Standards (QAS).

The Comprehensive Validation Support service includes all travel and labor charges for up to 20 days by the QIAGEN Validation Team. Typically, one week will be required to extract, quantify, and amplify the validation study samples and may require multiple individuals. Usually, two weeks is required to analyze the data and one week to write the final report. The expected time period to plete the Comprehensive Validation is six weeks. The actual time may vary depending on resource availability, including laboratory time dedicated to validation activities.

Lab Work – The QIAGEN specialist(s) will travel to the laboratory to conduct the on-site validation lab work. The QIAGEN specialist team will perform and plete all extractions, quantifications, amplfications, and capillary electrophoresis. The laboratory is responsible for providing systems/protocols that may be needed (generally laboratory SOPs, ex. interpretation guidelines). Additionally, the laboratory staff may be required to provide additional data needed for interpretation (ex. quantification/amplification/CE results) during the data review phase of the validation. 

Once the final scope of the validation is determined, QIAGEN will provide a quote for all consumables required for the validation.  Non-QIAGEN chemistry and accessories are not included and should  be purchased to cover the validation experimental design including qPCR, STR, NIST standards, required samples types (blood, semen, buccal samples) and required substrates (swabs, materials, etc).   The Customer is expected to have all materials on-hand 1 week prior to the validation start date.

Data Analysis – The Comprehensive Validation Support plan enpasses data collection (quants, amps, CE) during the on-site visit. The laboratory may be responsible for sharing (typically electronically via ) any validation data requested after the on-site visit. A QIAGEN specialist will plete all of the data analysis produced from the validation study design. This includes qPCR (quant) and STR (amp) analysis and linkage to starting samples.

Validation data CD/flashdrive – QIAGEN will review the validation data and draft a validation summary document, ensuring pliance with the FBI's QAS requirements/standards. QIAGEN will send validation data in an electronic format (/CD/flashdrive) to the laboratory. The laboratory is responsible for final pilation, any format change preferences, review and signoff of the validation report. The documentation provided by QIAGEN will aide in demonstrating pliance with all accreditation guidelines during laboratory audits. Should a hard copy of the validation study be preferred, the laboratory is required to specify prior to the onset of the validation.

Post-validation QIAGEN-to-Laboratory Transfer – Following pletion of the validation and generation of the draft validation summary document, a designated member of the QIAGEN validation team will review the validation with the Lab Manager and the Technical Leader. Following sign off on the validation report, training of the laboratory DNA staff will occur. Refer to the Post-validation Competency Training for additional information. """
9237333    Install, BR plus 3 integr. w. scheduling    Installation and training, BioRobot System including three approved integration devices with scheduling
大鼠粒細胞巨噬細胞集落刺激因子（GM-CSF）檢測試劑盒（血清.血漿.組織）
大鼠膠質細胞系來源的神經營養因子（GDNF）檢測試劑盒（血清.血漿.組織）
大鼠趨化因子（fractalkineCX3CL1）檢測試劑盒（血清.血漿.組織）
大鼠纖連蛋白（FN）檢測試劑盒（血清.血漿.組織）
大鼠睫狀神經營養因子（CNTF）檢測試劑盒（血清.血漿.組織）
大鼠骨成型蛋白受體Ⅱ（BMPR-Ⅱ）檢測試劑盒（血清.血漿.組織）
大鼠骨成型蛋白受體1A（BMPR-1A）檢測試劑盒（血清.血漿.組織）
大鼠骨成型蛋白4（BMP-4）檢測試劑盒（血清.血漿.組織）
大鼠骨成型蛋白2（BMP-2）檢測試劑盒（血清.血漿.組織）
大鼠活化素A（ACV-A）檢測試劑盒（血清.血漿.組織）
大鼠血管緊張素Ⅱ（ANG-Ⅱ）檢測試劑盒（血清.血漿.組織）
大鼠血管緊張素轉化酶（ACE）檢測試劑盒（血清.血漿.組織）
大鼠極低密度脂蛋白（VLDL）檢測試劑盒（血清.血漿.組織）
大鼠煙酰胺腺嘌呤二核苷酸（NADH）檢測試劑盒（血清.血漿.組織）
大鼠半胱天冬蛋白酶3（Caspase3CPP32）檢測試劑盒（血清.血漿.組織）
大鼠TH1細胞內細胞因子（TH1）檢測試劑盒（血清.血漿.組織）
大鼠TH2細胞內細胞因子（TH2）檢測試劑盒（血清.血漿.組織）
大鼠血清肌酸激酶（CK）檢測試劑盒（血清.血漿.組織）
小鼠破傷風抗體（TetanusAb）檢測試劑盒（血清.血漿.組織）
小鼠總睪酮（TotalT）檢測試劑盒（血清.血漿.組織）
大鼠芳香化酶（Aromatase）檢測試劑盒（血清.血漿.組織）
大鼠前列腺酸性磷酶（PACP）檢測試劑盒（血清.血漿.組織）
大鼠腦啡肽（ENK）檢測試劑盒（血清.血漿.組織）
大鼠Hepassocin（HPS）檢測試劑盒（血清.血漿.組織）
大鼠泌乳素（Prolactin）檢測試劑盒（血清.血漿.組織）
大鼠乙酰膽堿轉移酶（ChAT）檢測試劑盒（血清.血漿.組織）
大鼠尿液轉鐵蛋白（Transferrin）檢測試劑盒（血清.血漿.組織）
大鼠HMG-CoA還原酶（HMGR）檢測試劑盒（血清.血漿.組織）
大鼠羥基吲哚一氧一甲基轉移酶（HIOMT）檢測試劑盒（血清.血漿.組織）
大鼠芳香胺N-乙酰化轉移酶（AANAT）檢測試劑盒（血清.血漿.組織）