1.簡介：
CPS 系列不銹鋼離心泵廣泛應用于冷水機組，熱泵系統， 太陽能， 洗碗機等設備配套， 移送介質為不含顆粒，纖維，非易燃易爆的液體。
CPS series stainless steel centrifugal pump is widely used in cold water chiller , heat pump system ,
solar energy , dishwasher and other special equipment .The pump transfer the non flammable and explosion
liquid without the particles, fiber.
2.技術參數：
型號 Type | 進出口徑 Entrance /exit DIA | 功率 Motor (kw) | 電壓 Voltage (V) | 頻率 Frequency (Hz) | 轉速 Rotation speed (r/min) | zui高揚程 MAX Head lift (m) | zui大流量 MAX Capacity （L/min） | 泵浦自重 Pump weight |
CPS-05 | G1.2”(DN32) G1”(DN25) | 0.37 | 3phase-380 | 50 | 15 | 75 | 7.5 | |
CPS-05 | ||||||||
CPS-10 | G1.2”(DN32) G1”(DN25) | 0.75 | 3phase-380 | 50 | 2760 | 25 | 106 | 8.5 |
CPS-10S | ||||||||
CPS-20 | G1.2”(DN32) G1”(DN25) | 1.5 | 3phase-380 | 50 | 2760 | 26 | 180 | 14.5 |
3.核心部件技術特性：
配件編號 | 名稱 | 材質 | 技術特性 |
01 | 泵蓋 | 不銹鋼 | 沖壓成型、耐輕度腐蝕、光潔度好 |
02 | 軸封座 | 不銹鋼 | 沖壓成型、耐輕度腐蝕、光潔度好 |
03 | 電機 | F級漆包線+不銹鋼軸芯+冷軋矽鋼片+鋁殼 | 全銅漆包線；不銹鋼軸芯；絕緣等級-F級；IP54防護等級；高溫NSK軸承 |
04 | 機械軸封 | 碳化硅+石墨+高溫橡膠+不銹鋼彈簧 | 耐高溫100℃以內、耐磨性好、穩定性強（可根據循環介質進行定制） |
05 | 葉輪 | 不銹鋼 | 不銹鋼沖壓、焊接成型；動平衡精度高；水利性能* |
4.使用條件：
一般液體/General liquid | +5℃ - +50℃ |
熱水/Thermal conductivity water | +5℃ - +100℃ |
乙二醇/Ethyleneglycol | -35℃ - +120℃ |
工作環境溫度/The working temperature | -5℃ - +40℃ |
zui高海拔/The maximum elevation | 1000m |
zui大工作壓力/The maximum morking pressure | 8bar |
5.產品技術特點：
單級葉輪，軸向吸水，徑向排水/ Single Stage Impeller , Axial Suction , Radial water Absorption
結構緊湊，水泵與電機直接相，同軸安裝/ Compact Structure, Water and Pump and Motor Connecting directly ,Coaxial Mounting .
配有螺紋進出水口， 聯接方便 /Thread inlet and Outlet ,Easy to connect
重量輕， 主要零部件均采用薄板沖壓結構/ Light Weight , Main Parts is made of Sheet Stamping
耐輕度腐蝕/Mild Corrosion Resistant
6.特性曲線圖：
測試基礎：上述性能曲線對應于水在20℃是以正常速度運輸。揚程和流量的誤差為±10%，
性能誤差±10%。 泵的性能輸隨輸送流體介質的比重及密度的不同產生變化
Testing Base: The above characteristic testing is based on the water transferring with the normal
speed under 20 degrees. The error of the capacity and head is about 10%,
characters ‘error is about 10%. The pump characters change according to the
difference of the liquid mediums’ proportion and density.
7.安裝尺寸圖和安裝尺寸表：
采購中心
