進口離心管道泵｜美國進口離心管道泵

進口離心管道泵｜美國進口離心管道泵

進口離心管道泵工作原理：

離心泵所以能把水送出去是由于離心力的作用。水泵在工作前，泵體和進水管必須罐滿水形成真空狀態，當葉輪快速轉動時，葉片促使水很快旋轉，旋轉著的水在離心力的作用下從葉輪中飛去，泵內的水被拋出后，葉輪的中心部分形成真空區域。水原的水在大氣壓力（或水壓）的作用下通過管網壓到了進水管內。這樣循環不已，就可以實現連續抽水

進口離心管道泵分類如下：離心泵的種類很多，分類方法常見的有以下幾種方式

1按葉輪吸入方式分：?jiǎn)挝诫x心泵 雙吸式離心泵。

2按葉輪數目分：?jiǎn)渭?jí)離心泵 多級離心泵。

3按葉輪結構分：敞開式葉輪離心泵 半開式葉輪離心泵 封閉式葉輪離心泵。

4按工作壓力分：低壓離心泵 中壓離心泵 高壓離心泵邊 立式離心泵。

5按形式分：立式管道泵 臥式管道泵

管道離心泵主要系列產品有管道離心泵、立式熱水泵、立式高溫離心泵、立式管道化工泵、立式管道油泵、立式不銹鋼防爆型化工離心泵。

進口離心管道泵應用領域：

1. 立式熱水泵適用于冶金、化工、紡織、木材加工、造紙以及飯店、浴室、賓館等鍋爐高溫?zé)崴鰤貉h(huán)輸送以及城市住房采暖循環用泵

2. 立式高溫離心泵廣泛用于：能源、冶金、化工、紡織、造紙以及飯店、浴室、賓館等鍋爐高溫?zé)崴鰤貉h(huán)輸送以及城市住房采暖循環用管道泵。

3. 立式管道化工泵，供輸送不含固體顆粒，具有腐蝕性，粘度類似于水的液體，適用于石油、化工、冶金、電力、造紙、食品制藥和合成纖維等部門

進口離心管道泵技術參數：

流量范圍：0.8m3/h~120 m3/h；
揚程范圍：5.6m~330m；溫度范圍：-20℃~120℃；
輸送液體種類：各種清潔水及輕腐蝕液體；泵腔承壓：≤4.0MPa。

進口離心管道泵泵美國泰樂TYLER售后服務：

*的服務鑄就*的企業讓客戶無后顧之憂。
1、按合同要求提供產品的合格證、銘牌、檢驗報告、產地證名、安裝說明書等。
2、顧客在驗收產品過程中，如出現與合同要求不符時，我司接到顧客通知后兩小時內給予處理。
3、我司提供十二個月以上產品質保期，時間從驗收合格之日起計算。
4、在正確安裝和使用下，出現產品質量問題，本公司將負責到底。

Imported centrifugal pump centrifugal pump

Working principle of centrifugal pump:

Centrifugal pump so that the water can be sent out because of the role of centrifugal force. Pump before work, pump body and water tank full of water to form a vacuum, when the impeller rotates fast, it leaves the water to quickly rotate, rotating the water under the centrifugal force and flew from the impeller, pump the water is thrown, the impeller center of the formation of a vacuum region. The water in air pressure (or pressure) through the pipe network under the inlet pressure to the inside. This endless cycle, you can achieve continuous pumping

Imported centrifugal pump classification is as follows: a variety of types of centrifugal pumps, classification methods are common in the following ways

1 divided by impeller means: single suction centrifugal pump double suction centrifugal pump.

2 according to the number of impeller: single-stage centrifugal pump multi-stage centrifugal pump.

3 according to the impeller structure: open impeller centrifugal pump half open impeller centrifugal pump closed impeller centrifugal pump.

4 according to the working pressure: low pressure centrifugal pump, high pressure centrifugal pump, vertical centrifugal pump.

5 according to the form: vertical pipeline pump horizontal pipeline pump

The main products of pipeline centrifugal pump are pipeline centrifugal pump, vertical hot water pump, vertical high temperature centrifugal pump, vertical pipeline chemical pump, vertical pipeline oil pump, vertical stainless steel explosion-proof chemical centrifugal pump.

Application of imported centrifugal pump:

1 vertical hot water pump is suitable for metallurgy, chemical industry, textile, wood processing, paper making, as well as hos, bathrooms, hos and other high temperature hot water pressurized boiler circulation and urban residential heating cycle pump

2 vertical high temperature centrifugal pump is widely used in energy, metallurgy, chemical industry, textile, paper making, as well as hos, bathrooms, hos and other boilers, high temperature hot water pressurized circulation and urban housing heating cycle of the pipeline pump.

3 vertical pipeline chemical pump for conveying solid particles, corrosive, viscosity similar to water liquid, suitable for petroleum, chemical, metallurgical, power, paper, food, pharmaceutical and synthetic fiber and other sectors

Technical parameters of imported centrifugal pump:

Flow range: 0.8m3/h~120 m3/h;

Lift range: 5.6m~330m; temperature range: -20 DEG C ~120 c;

Category: liquid and light corrosive liquid cleaning water; pump chamber pressure: less than 4.0MPa.

The United States imported centrifugal pipeline pump Taylor TYLER customer service service:

The first-class service created a first-class enterprise so that customers no worries.

1, according to the contract requirements for product certification, nameplate, inspection report, certificate of origin, installation instructions etc..

2, the customer in the process of acceptance of the product, such as the emergence of the contract requirements and inconsistent, I received the notification of the customer within two hours after the treatment.

3, our company provides more than twelve months warranty period, the time from the date of acceptance.

4, in the correct installation and use, product quality problems, the company will be responsible in the end.