MZ磁力驅動自吸泵

MZ磁力驅動自吸泵  MZ磁力驅動自吸泵

合理的選型非常重要，要對所涉及的工藝過程有充分的了解，包括流體的腐蝕特性、比重、粘度、溫度、蒸氣壓、溶解性氣體含量和固體含量等，我們會提供相應的和售后服務。

電聯：  林云勇 ，受原材料價格的波動，具體含稅含運費價格，需以電議為準。
詢價及其他事宜  接收：1804925802  # .c o m 
詢價請注明產品的型號、吸入口直徑、排出口直徑、葉輪名義直徑、葉輪直徑變更符號、數量和到貨目的地。
如果你需要紙質標準性能表、規格選型冊，可免費提供。

MZ型磁力驅動自吸泵 

 
MZ Magnetic Driven Self-Priming Pump 

MZ型磁力驅動自吸泵，主要是為容器和槽車卸載而設計的，用于液槽抽排、罐車卸貨，確保排出進口管路中的空氣迅速引液，可供輸送液態烴、汽油、煤油、柴油等石油產品和化工、制藥等行業易燃易爆、有毒有害的液體，尤其適用于船用油泵和陸地油庫、油罐車的裝卸用泵。 

Model MZ magnetic driven self-priming pump is designed mainly for unloading vessels and tanker cars, to ensure quick priming by removing the air in the inlet and discharge piping; it can convey petrochemical products such as liquid hydrocarbon, gasoline, kerosene and diesel oil and inflammable and explosive, toxic and harmful liquid in chemical and pharmaceutical industries, and is especially suitable as vessel oil pump and handling pumps for onshore oil depot and oil tankers. 

性能范圍         The main specifications 
流量  Flow         1.6～400m3/h 
揚程  Head               20～125m 
介質溫度  Temperature   -20℃～+120℃ 
進口直徑Inlet dia.                  25～200mm 
zui大工作壓力Maximum operating pressure 2.5MPa 

型號意義Type denotation 

結構說明Type denotation 

1.臥式、外混式、自吸性能好。 
1.Horizontal and external mixing type, with good self-priming performance. 

2.磁力驅動、全密封、無泄漏。 
2.Magnetic driven, fully enclosed and leakage free. 

3.泵體采用底腳支撐，軸向吸入、徑向排出。 
3.The body is supported with feet, with axial suction and radial discharge. 

4.葉輪為閉式葉輪，軸向力主要采用背葉片平衡，殘余軸向力由滑動軸承承受。 
4.The impeller is enclosed type; the axial load is balanced mainly with back vane, and the residual axial load is taken by sliding bearings. 

5.當液體在泵內循環時間較長時，為防止內部循環液的溫度升高，可設置溫控保護裝置。 
5.When liquid circulates within the pump for a long time, to prevent heating up of such circulating liquid, temperature control protection device can be provided. 

6.管路中不需安裝底閥，工作前只需保留泵體內儲有定量引液即可。 
6.It is not necessary to install a bottom valve in the piping, and before operation, it is only required to have given amount of priming liquid within the pump body. 

7.后拉出式設計，可以不動進出口管路，即可維修，使用方便。 
7.It is in rear pull-out design, so maintenance can be done without involving the inlet and discharge piping, convenient in use. 

8.可采用與電機直連或膜片式聯軸器連接的形式。 
8.Either direct driving by motor or connection via diaphragm coupling can be used.