◆ 當壓縮氣體進入粉碎室，在粉碎室外圍有 4 個粉碎噴嘴，噴射氣流，使物料受到氣流高速?zèng)_擊，以及物料相互對接而粉碎， 分級輪把細的顆粒分離出來，粗顆粒循環返回粉碎室繼續粉碎，從分級輪出料口收集到的將是分部均勻的超微細粉。
1、適用于干式超微工藝。氣流沖擊速度可達 2.5 馬赫以上，一般情況下很容易獲得 1-10 微米 (µm) 粒子，根據物料性質， 還能得到小于 1 微米 (µm) 粒子。
2、由于粉碎機內部有分級輪機構，制品中粗粒子不斷循環粉碎，因而能獲得粒子均勻、粒徑分布范圍小的制品。
3、該設備具有粉碎時間短、結構簡單、操作檢修方便、占地面積小、低噪音（72dB）和無振動等優點。
4、粉碎時效率高，能進行連續粉碎，能保持粉碎制品純度。
◆ When compressed gas into the crushing chamber, and there are 4 pieces outside the nozzle, the jet stream, make the material by high-speed airflow, and the material of mutual butt joint and crushing, grading round particles separated parts, coarse particle circulation to return to the crushing chamber to smash, collected from the classification of discharging mouth will be distribution of ultrafine powder.
1、suitable for dry amd technology.Flow rate, can be more than 2.5 Mach in general is very easy to get 1 to 10 microns (including m) particles, according to the nature of the material, also can get less than 1 micron particles (including m).BKL 系列流化床對撞式氣流粉碎機
2、BKL 系列流化床對撞式氣流粉碎機because internal grinder has the classification mechanism, of coarse soil particle in the product cycle, and therefore can obtain uniform particle, particle size small ranges of products.
3、This equipment has the grinding time is short, simple structure, convenient operation and maintenance, cover an area of an area small, low noise (72 db) and no vibration, etc.
4、For continuous crushing, crushing efficiency is high, can keep crushing product purity.
采購中心
