德國法勒Vahle指揮系統

德國MTL Instruments GmbH隔離器 光柵 現場總線

德國RHEINTACHO Messtechnik GmbH傳感器

:王工
同號
      449147851
價注意事項：
       1.請發書面詢價函（郵件，，傳真等），不接受口頭報價。
       2.如果型號不能*對上，請?zhí)峁┯⑽钠放泼?具體型號+數量。
       3.詢價的商友請主動告知公司名稱和，謝謝。

產品系列：

Open conductor systems

Catalog 1a The "VAHLE rail" was invented in 1912 by the engineer, Paul Vahle. For typical traveling wires at this time, the flexibility and expansion of the wire frequently led to problems in forming a contact and to considerable spark generation, but also to breaks in the wire. Paul Vahle drew a copper profiled section onto a T-shaped steel section and thus achieved greater strength and a reliable contact, so that the transmission resistance between the copper conductor and the carbon brush of the current collector was reduced significantly. In this way, stops in operation and a long service life of the power supply were achieved. Conductor rail systems are a safe source of power for current capacities up to 3000 A for many power loads that are predominantly subjected to rough operation, e.g., traveling cranes, loading bridges, container handling equipment, monorail systems, coking machinery, electric hoists, etc. VAHLE constantly improves and develops the various conductor rail systems. In the course of over 90 years of product development, the following systems have been created: VAHLE Powerails with a T-shaped steel profile and drawn copper-head are the proven and fully developed "classic" rail type. Copper-head aluminum rails are especially economical due to their light weight with high conductivity. Copper-head synthetic-material rails are preferably used for applications in corrosive atmospheres and in locations with high humidity. Solid-copper rails are recommended for high current capacities and for use in humid locations. Special features Variation in temperature and resulting expansion and contraction is compensated by standard expansion joints. Conductor rails can be delivered already bent. Heating systems are available for all conductor rails. Special conductors for up to 3000 A current capacity are availble on request.   Profile type Material of the carrier profile Cross section of copper head [mm²] Max. current intensity [A] Continuous operation / 35° C L20 A20 Steel Aluminum 14 - 100 14 220 - 444 445 F35 A35 Steel Aluminum 30 - 200 30 - 100 320 - 724 600 - 795 F45 A45 Steel Aluminum 50 - 600 50 - 400 495 - 1432 790 - 1451 C20 C35 C45 C60 Solid copper Solid copper Solid copper Solid copper 200 400 500 - 800 1200 720 1080 1210 - 1580 2360   Accessories for VAHLE conductor rails Expansion and fixed joints Retaining and connecting clamps Rail holders and rail supports Insulators for high and low voltage Current collectors

Open conductor systems

Catalog 1a The "VAHLE rail" was invented in 1912 by the engineer, Paul Vahle. For typical traveling wires at this time, the flexibility and expansion of the wire frequently led to problems in forming a contact and to considerable spark generation, but also to breaks in the wire. Paul Vahle drew a copper profiled section onto a T-shaped steel section and thus achieved greater strength and a reliable contact, so that the transmission resistance between the copper conductor and the carbon brush of the current collector was reduced significantly. In this way, stops in operation and a long service life of the power supply were achieved. Conductor rail systems are a safe source of power for current capacities up to 3000 A for many power loads that are predominantly subjected to rough operation, e.g., traveling cranes, loading bridges, container handling equipment, monorail systems, coking machinery, electric hoists, etc. VAHLE constantly improves and develops the various conductor rail systems. In the course of over 90 years of product development, the following systems have been created: VAHLE Powerails with a T-shaped steel profile and drawn copper-head are the proven and fully developed "classic" rail type. Copper-head aluminum rails are especially economical due to their light weight with high conductivity. Copper-head synthetic-material rails are preferably used for applications in corrosive atmospheres and in locations with high humidity. Solid-copper rails are recommended for high current capacities and for use in humid locations. Special features Variation in temperature and resulting expansion and contraction is compensated by standard expansion joints. Conductor rails can be delivered already bent. Heating systems are available for all conductor rails. Special conductors for up to 3000 A current capacity are availble on request.   Profile type Material of the carrier profile Cross section of copper head [mm²] Max. current intensity [A] Continuous operation / 35° C L20 A20 Steel Aluminum 14 - 100 14 220 - 444 445 F35 A35 Steel Aluminum 30 - 200 30 - 100 320 - 724 600 - 795 F45 A45 Steel Aluminum 50 - 600 50 - 400 495 - 1432 790 - 1451 C20 C35 C45 C60 Solid copper Solid copper Solid copper Solid copper 200 400 500 - 800 1200 720 1080 1210 - 1580 2360   Accessories for VAHLE conductor rails Expansion and fixed joints Retaining and connecting clamps Rail holders and rail supports Insulators for high and low voltage Current collectors

Rheintacho rotational speed sensors

These sensors use various magnetic proximity measuring principles to monitor the speeds of machine components in a range between 0 and 30,000 rpm.

The application itself determines the measuring principle used. Rheintacho offers a wide range of standard products for the most varied applications, with suitable measuring systems and electronics, as well as appropriate housings, designs and connections. As well as this, we also provide custom solutions, quickly and inexpensively.

Rheintacho specializes in developing and manufacturing sensors for the harshest environments. The sensors' resistance to high pressure, temperature changes, electromagnetic interference, aggressive media, water and steam jets is crucial for their operability and service life.

Rotational speed sensor applications:

• Ships' engines
• Communal power stations
• Wind power plants
• Emergency power units
• Hydraulic drives (hydro motors)
• Electric drives (Material Handling)
• Road-building machinery
• Cranes
• Agricultural machinery
• Printing and paper machines
• Special machinery

Standard sensor features at a glance:

• Frequency range from true 0 Hz to 30,000 Hz
• Pressure resistance up to 500 bar as standard
• Extremely leakproof due to patented individual wire sealing
• Resistant to (hydraulic) oil, salt, alkaline solutions and acid
• Wide operating temperature range (-40°C to +165°C)
• Highly resistant to changes in temperature
• Highly resistant to electromagnetic interference (EMC/ESD)

Innovative LED-Strobes from Rheintacho:

RT Strobe pocketLED

Available soon:
RT Strobe 3000 LED
RT Strobe 5000 LED
RT Strobe 7000 LED
RT Strobe 10⁴ LED

Meet us @ Labelexpo Europe!
28.09. -01.10.2011
Hall 12 / Stand 12 U 100

Stroboscopes

Stroboscopes are versatile instruments for the visualisiation of very fast movements. They are important and necessary tools for the inspection and control of machines and manufacturing lines eg in printing or textile industries.

Stroboscopes could also be used for the non-contact measuring of rotational speed. If the stroboscope flash frequency matches the frequency of movement, the test object appears stationary. It can be observed and its frequency of movement recorded.

Rheintacho offers stroboscopes in different design and technologies. For every single application the right tool for you.

Portable stroboscopes:

Stationary stroboscopes:

Stroboscope control units:

Rheintacho digital hand-tachometer

Rheintacho's tried and tested digital hand-tachometer record rotational speeds and run lengths. Some of them use a proximity system by shining a light beam on a reflective mark; others use a contact system with special adapters for different applications.

Rheintacho switching devices and converter

This category includes switching devices to protect against excessive or insufficient speed (ROTAS), a frequency – current/voltage transducer and a system for detecting the direction of rotation.

All these systems have been developed for industrial use.
The speed monitor (ROTAS) and the converter have GL approval.
The devices are mounted on a top-hat rail.

Electrical indicator systems

Rheintacho electrical indicator systems visualize process factors such as rotational speed, velocity, flow, filling levels and positions. These factors are transferred as normalized voltage or current signals for display.

Rheintacho offers a range of indicators in analog or digital versions, and in various sizes.

The indicators are exceptionally robust and ideally suited for use in harsh, industrial environments. We also take account of ergonomic aspects for the operating staff. Clear displays with a well-structured, high-contrast and clear figures enable them to read the displayed values with ease.

The many different uses of the electrical indicators are shown by applications in experimental set-ups and in process monitoring, test rigs and control systems. Ideally, they are used together with our tacho generators.
The actual location of measurement can be up to several hundred yards from the indicator, for example on ships, where the speeds of the engines are displayed way up on the bridge.

Features at a glance:

• Clear analog or digital indicators
• Industrial standard products in various sizes
• Clear, legible display
• Sturdy design
• Long service life
• Excellent value for money
• Custom faces

Tacho generators

Rheintacho tacho generators reliably measure the rotational speeds of motors. The rotation is mechanically transferred directly via a shaft to the sender. At the output of the sender there is an electric signal proportional to the rotation. The signal is then normally transferred to a Rheintacho indicator system.

The senders are available with a normalized voltage, current or pulse output, which means that the right model can be chosen for a wide range of indicator and control units. Rheintacho also offers custom solutions adapted for the application.

Because of their sturdy and compact design and their electromechanical measuring procedure, the tacho generators are absoluy suitable for industrial applications and are used in plant construction and mechanical engineering, as well as in power and drive engineering, and above all in shipbuilding.

They can measure the rotational speeds of ships' engines, turbines, rotors, rollers or conveyor belts very reliably, even under the most demanding conditions, because this measuring method needs no external power supply. Even if the on-board supply fails compley, the tacho generator continues to provide accurate readings.

A good example of use over long distances is the measurement of the speed of a ship's engine, which is then displayed way up on the bridge.

If, for reasons of safety, certain rotational speeds must be measured several times and with different methods, Rheintacho tacho generators are a reliable alternative to purely electronic or optical measuring systems.

Features:

• No external power supply needed
• Mechanical transfer of rotation
• Compact design
• Shock-resistant
• Powerful, normalized voltage, current or pulse output
• Tested and approved by certification institutes
• A reliable alternative to optical or electronic measuring systems
• Available in AC or DC version

產品系列：

Intrinsic Safety & Process I/O™

MTL is a world leader in products designed for use in hazardous areas where there is a probability of explosive atmospheres.

The products range from industry renowned (IS) barriers and isolators through to sophisticated process control products, all designed for the harsh environments often encountered in the process industry.

As part of our 'Customer Committment' process, we regularly produce educational reference material to assist users in understanding the latest EU regulations and directives.

• To download the latest Flammable Facts poster ... <click here>
• To download the latest ATEX poster ... <click here>

Products in Intrinsic Safety & Process I/O™

Intrinsic Safety Zener Barriers

A simple yet highly flexible form of IS safety interface. Compact and inexpensive - MTL's…

Intrinsic Safety Isolators

Isolates hazardous and safe area circuits. Simplifies installation and avoids earth-loop problems.

IS Indicators

Display process information in the hazardous area. Loop-powered displays, backlight options.

TI Multiplexers

Cuts installation and cable costs for temperature inputs. Saves installation time, space and weight.

Process I/O™

Choose to locate your Remote I/O in Zone 1/Div 1 or Zone 2/Div 2 hazardous…

Intrinsically Safe Ethernet

For Zone 1 and Zone 0 applications the 9460-ET Series provides cost-effective Intrinsically Safe (IS)…

Products in HART Interfacing

HART in Process I/O

HART Multiplexers

Products in Industrial Security

Network Security ~ Overview

Don't leave your process network exposed: get Tofino™ protection from the growing threat of cyber-security…

Tofino™ LSM - Loadable Security Modules

Firmware modules that can be downloaded into the Tofino™ Security Appliance to implement the desired…

Tofino™ CMP - Central Management Platform

Tofino™ CMP is an easy-to-use Windows-based software tool that configures and monitors an entire network…

Tofino™ Hardware

For maximum network protection from growing threat of cyber-security attacks.

Products in Surge Protection

Combination Surge Protection Products

Although MTL Surge Technologies supply many unique and diverse stand alone protection devices, there may…

Data and Signal Surge Protection

Induced surges and transient voltages can destroy or, perhaps more worryingly, render inaccurate sensitive control…

Fieldbus Surge Protection

The fieldbus system by the very nature of the environment in which it will be…

Network and Comms Surge Protection

Network technologies from the Internet to LANs have revolutionised the way businesses operate.

Power Surge Protection

Surges and spikes from nearby lightning strikes, arc - welders and high voltage cables can…

Specialist Surge Protection Products

MTL Surge Technologies has a wealth of experience in the design and manufacture of surge…

ecoms Surge Protection

Highly-integrated, small-signal ecommunications equipment is becoming increasingly sensitive to damage and disruption from voltage surges

Products in HMI and Visualisation

Ex Zone Panel PC

EXPLORER 15i/18i - the highest-performance Ex-certified Panel PC available so far.

Remote PC Terminals

GECMA HMI's set the standard for operation and visualisation in remote or hazardous locations.

Fieldbus

MTL make fieldbus easy in safe and hazardous areas.
The MTL range of Foundation fieldbus physical layer components makes it easy to complete any fieldbus installation between control system and field instruments. Fieldbus power supplies, Fieldbus barriers, fieldbus power conditioners and Megablock wiring connection hubs cover every application in safe and hazardous areas, providing the highest levels of availability, whilst maintaining a common architecture that is independent of the Zone or Division of use.

• For more information about installing fieldbus networks ... <click here>
• For a copy of the fieldbus SmartPlant Instrumentation (SPI) library ... <click here>
• For a copy of the MTL-Relcom fieldbus wiring guide ... <click here>
• For a free copy of the latest Fieldbus Barrier Segment Calculator ... <click here>
• For a free copy of the latest Fieldbus Calculator ... <click here>
• To download the latest Fieldbus poster ... <click here>

Products in Fieldbus

Fieldbus Power Supplies

Redundant, non-redundant and hazardous area fieldbus power supplies, all with isolation between bulk input and…

Fieldbus Wiring Components

Megablock wiring hubs, fieldbus barriers, terminators, junction boxes, spur connectors, etc. Essentials for segment wiring.

Fieldbus Diagnostics and Devices

Fieldbus devices, including displays and diagnostic module.

Fieldbus Test Equipment and Software Tools

Fieldbus test instruments, diagnostic monitors and application software for rapid installation and problem solving.

Intrinsically Safe Fieldbus Barriers

NEW MTL Fieldbus Barrier provides live-working in hazardous areas.

Products in Industrial Ethernet

Ruggedised Ethernet

MTL offer a full range of ruggedised Ethernet products designed to operate in harsh process…

Intrinsically Safe Ethernet

For Zone 1 and Zone 0 applications the 9460-ET Series provides cost-effective Intrinsically Safe (IS)…

Tofino™ Hardware

For maximum network protection from growing threat of cyber-security attacks.