制藥網>產品庫>儀器儀表>其它儀器儀表>其它儀器儀表>>德國Herding GmbH過濾器

德國Herding GmbH過濾器

參考價	面議

參考價

面議

具體成交價以合同協議為準

公司名稱尚階（上海）自動化設備有限公司
品牌其他品牌
型號
所在地上海市
廠商性質經銷商
更新時間2018/4/4 9:30:50
訪問次數595

產品標簽:

德國Herding 德國Herding 德國Herding 德國Herding 德國Herding

在線詢價 收藏產品查看電話同類產品

聯系我們時請說明是制藥網 上看到的信息，謝謝!

索取相關資料

公司介紹主營產品

尚階（上海）自動化設備有限公司是主要經營歐美進口元器件的公司主要暴扣，儀器儀表，泵，閥傳感器，工裝夾具，機廠零配件，汽車零配件等等

展開顯示更多內容

儀器儀表泵閥傳感器

產品簡介在線詢價

產地	進口	產品新舊	全新

德國Ashcroft Instruments GmbH壓力表

德國Herding GmbH過濾器

德國Herding GmbH過濾器產品信息

德國Ashcroft Instruments GmbH壓力表

德國Herding GmbH過濾器

:王工
同號
      449147851
價注意事項：
       1.請發書面詢價函（郵件，，傳真等），不接受口頭報價。
       2.如果型號不能*對上，請?zhí)峁┯⑽钠放泼?具體型號+數量。
       3.詢價的商友請主動告知公司名稱和，謝謝。

產品系列：

HERDING®-sinter plate filter for surface filtration grant clean gas values of < 1 mg/m³, even with dusts of D50 < 1µm. The matrix consists of sintered polyethylene PE. An additional PTFE-coating gets into the pores of the PE-basic body and forms a micro-porous, non-sticking. This combined material is most extensively chemical resistant. The HERDING®-sinter plate filters are extremely stable in structure, rigid, water resistant and only need low-maintenance. The average useful life of a Herding ® filter can even exceed 10 years.
HERDING® sinter plate filters show a very high efficiency of separation and environmental compatibility. The filters can be recycled without any problems, no toxic waste has to be disposed off.
By using these filter elements in HERDING® HSL-units there is an optimum combination of positive attributes like: compactness, optimum flow behavior, ideal dust emission and an extensive operational safety, resulting from the rigidity of the matrix and of no wear and tear against abrasive media. At regular intervals or at pre-determined differential pressure the filter elements are cleaned on-line by a jet-pulse.
The filter elements are fixed only by a single screw – which makes maintenance easy and saves times. On request antistatic or even special design, e.g. for using cooling lubricants or aerosoles are possible. HERDING®-DELTA-filter are future-oriented; already today they meet what tomorrow’s environment and legislation will require. So in fact the separation efficiency shows a much better value than required by the BIA-certificate, regarding dust classification M.

Like the patented HERDING® sinter-plate filter the matrix consists of sintered polyethylene PE. An additional PTFE-coating gets into the pores of the PE-basic body and forms a micro-porous, non-sticking. This combined material is most extensively chemical resistant.
Both the material and the specially developed lamella, changed to the delta-shaped extended–surface pattern make the filter element very stable and rigid, combined with the possibility of an optimum cleaning of the horizontal elements, installed from the side.
By using these filter elements in HERDING® DELTA resp. DELTASys-units there is an optimum combination of positive attributes like: compactness, optimum flow behavior, ideal dust emission and an extensive operational safety, resulting from the rigidity of the matrix and of no wear and tear against abrasive media. At regular intervals or at pre-determined differential pressure the filter elements are cleaned on-line by a jet-pulse.
The filter elements are fixed only by a single screw – which makes maintenance easy and saves times. On request antistatic or even a special design is possible.
HERDING®-DELTA-filter are future-oriented; already today they meet what tomorrow’s environment and legislation will require. So in fact the separation efficiency shows a much better value than required by the BIA-certificate, regarding dust classification M.

The Filter Elements DELTA²

The new generation of DELTA elements

Facts make our DELTA-filter element series so special and convincing. Already today they meet the requirements of tomorrow’s environmental technology. The body of the DELTA-filter element is formed by a sintered polyethylene PE-matrix. The filter surface is built by a micro-porous and hydrophobic PTFE-coating, which is firmly embedded into the pores of the PE-matrix.

德國Herding GmbH過濾器


Rounded edges	PTFE-Coating	Duplex- profile gasket
the flow optimized design results in better cleaning	is embedded into the pores of the PE-matrix and forms a micro-porous surface	special design for an optimal seal between raw and clean gas section

Facts about our DELTA-Elements

•	filter element lifetime of up to 15 years possible
•	low maintenance costs due to long useful life of the filter elements
•	constant pressure drop guarantees consistent air flow
•	high separation efficiency due to surface filtration
•	clean gas emissions ?.0 mg/m3
•	compact rigid body generates a robust filter design
•	filter medium: capable to be washed, recycled and refurbished
•	universal mounting from the raw- or clean gas side of the filter unit
•	horizontal or vertical installation possible
•	filter medium absoluy free of fibres, ideal for product recovery
•	excellent use for highly abrasive dusts
•	antistatic version of the filter elements available
•	FDA-conformity by using food-grade filter material

Technical Data:
The new DELTA2 is an improvement over our DELTA-element. The filter area of the DELTA2 has been increased by 25 % through adding more folds per chamber, but still remaining consistent with the original dimensions.

- Both DELTA-versions are available in the following lengths: 750 mm, 1200 mm, 1500 mm
- The use of the DELTA or the DELTA2 is determined by the process respectively by the process parameters.

德國Herding GmbH過濾器

Herding® ALPHA-Sys

HERDING®-ALPHA-filter is a high temperature resistant filter, basically made of clay and glass, designed for temperature ranges up to 350°C and has excellent chemical resistance, especially at higher temperatures. The cylindrically shaped matrix elements are coated on the outside with an inorganic layer in order to guarantee a surface filtration with a long lifetime at low pressure losses when separating finest dusts.
HERDING®-ALPHA-filter elements (clusters) are horizontally installed into the filter unit. This results into a compact and space-saving design and makes mounting extremely efficient.
The filter elements, set up in clusters, are cyclically cleaned on-line by the jet-pulse-cleaning system.

Remarkable advantages of the HERDING® ALPHA-filter:

•	Constant operation of the filter at low pressure loss.
•	Temperature-resistant up to 350 °C.
•	Excellent efficiency of separation.
•	Easy access to the filter elements during installation.
•	Filter element installation from the clean gas side.
•	High flexibility at the design of filter systems.
•	Compact design, high ratio of filter surface per volume disposition
•	Not flammable
Application:
•	Combustion process
•	Drying process

HERDING® filter units, type HSL consist of three components bolted together:
The top-section consists of an acoustic hood with a radial fan. An inspection door allows at any time an easy access to the fan for maintenance and check-ups. The cleaned air is either recirculated or discharged to the atmosphere.
The center-section is subdivided into a clean air space and a raw gas space by a specially developed slotted plate. The clean gas space accomodates the complete cleaning system with the compressed air-tank, the quick opening and safety valve as well as the blow pipes. In the raw gas space our patented HERDING® sinter plate filter are installed, granting clean gas value of <1mg/Nm².
The bottom-section consists of a support structure, customized and equipped with various discharge devices.

德國Herding GmbH過濾器

Herding® DELTAComp

The new and compact unit design DELTAComp enables the user and operator to make a flexible choice regarding air flow and the size of the unit.
Easy access for operation and maintenance from the front as well as the low profile of the unit are results of our unique user-friendly design approach.
Depending on the air flow, our DELTA or DELTA² elements can be horizontally installed in either one or two levels.

德國Herding GmbH過濾器

With this newly developed filter unit by HERDING the idea of a compact and flexible design was consequently put to reality. The DELTAComp can be used for an air flow of up to 6.000 m3/h. The electrical controls as well as the fan are integrated into the filter unit. The lower section of the unit can be delivered with a pulse coater, a spark separator, a fire protection system, or a pneumatic dust discharge. The new space saving concept of our DELTAComp units convinces especially by the flexibility of serving in various applications.

SAMPLE APPLICATIONS OF THE NEW DELTAComp-SERIES

Laser Applications:
Laser machining usually generates extremely fine dusts and fumes during the cutting and welding process. On the one hand this can cause health hazards and on the other hand contaminate and damage the machine, the aggregates as well as the processed material. Furthermore some dusts can be even highly inflamed and/or sticky. For this application, we recommend a DELTAComp, which is equipped with a spark separator and a Herding® pulse coater.

Spring and Wire Industry:
During the production of springs or wires an optimum dust capturing as well as a constant cooling of the tools are the key factors to maintain a constant product quality. The high separation efficiency of the filter elements is equally important like maintaining the required air flow by holding constant pressure drop values across the filter elements.

Coating of Tablets or Seeds:
During the coating process of tablets or seeds an exact defined air volume is constantly exhausted from the coating-process. This is necessary in order neither to let hazardous material into the workshop nor to loose any product. A constant air flow is decisive for high product quality (e.g. coating thickness).

Polishing of Steel:
While polishing steel e.g. fittings and mountings, not only the fine dust arises but also flammable material. Polishing paste which is very sticky may even be mixed with the extracted dust. For this application the DELTAComp can be equipped with our pulse coater as well as with a fire protection system.

More applications for the DELTAComp are to be found in several industries like:
Pharmaceutical, Food, Glass, Ceramics, Plastics, Stone, Powder Coating, Chemical, Metal Processing etc.v

德國Herding GmbH過濾器

Herding® DELTAFlex

The new and compact DELTAFlex design enables the end user and the operating company flexibility with a small foot print, particularly when large air flows are of concern.
The filter elements are mounted vertically and depending on the application, the filter unit will be equipped with DELTA- or DELTA²-filter elements.
The safety concept and the unit design following the ATEX-safety regulations will follow your needs.

德國Herding GmbH過濾器

With this newly developed filter unit series by Herding, the idea of a compact and flexible design was conseuently converted into reality. The modular version of DELTAFlex can handle air flows of up to 400,000 m3/h. The DELTA- and DELTA²-filter elements are vertically installed into the DELTAFlex housing. Depending on the requirements and the filter unit design, the filter elements can be arranged in a single row, in two rows or even up to three rows.

APPLICATIONS – The new DELTAFlex-Series

The DELTAFlex filter units are suitable for the separation and / or product recovery of fine, adhesive or even abrasive dusts.

Powder Coating:
Constant air flow and laminar air flow are of significance for optimal and efficient results during electro-static powder coating. With the Herding® DELTA- or DELTA²-filter element a contamination free product recovery of overspray is given as contaminating of the powder through the use of the Herding® filter element is excluded.

Steel Pipe Production:
The production of seamless steel pipes demands maximum up-time of the whole manufacturing process including also the filtration system. It is to be assured during the forming, rolling and gauging of the pipes that the extraction of the steam, metal oxides and graphite is continuous and steady as these contaminants may adversely affect the pipe surface quality.

Extraction of Welding Fumes:
When extracting welding fumes, produced by partly oily or greasy sheet metal, the capturing method and an effective filtration are significant since most times the clean gas is returned to the work area.
Depending on the state or quality of the sheet metal a pre-coating material may be necessary, which is applied as a filter aid onto the Herding® rigid body filter element DELTA or DELTA² by means of the Herding® MultiCoater.

Toner Dusts:
During the production and aspiration of toner powder for color cartridges the filter unit has to be carefully selected with regarding the ATEX-regulations and other safety aspects (classification of -zones). Should an explosion hazard be of concern, the DELTAFlex unit can be equipped with a horizontally or vertically installed rupture disk. Furthermore an explosion discharge duct can be optionally added to vent the pressure of a possible explosion away from the filter unit into a low risk area.
As an alternative to the rupture disk, the unit may be equipped with an explosion suppression system which utilizes the injection of dry extinguishing powder.

More applications for the DELTAFlex are to be found in several industries like:
Automotive, Chemical, Pigments, Glass, Plastics, Food, Metal Processing, Pharmaceutical, Recycling, Stone, Cement, etc.

Herding® filter-modular system DELTASys

With the new DELTASys-system developed by HERDING the idea of a modular design has been consequently transferred. Those filter units show a filter area of 90 to 1125 m² and are designed for a volume flow of 4.000 to 135.000 m³/h. Complete units (with built-in fan) are available to up to 27.000 m³/h . The modular design such as blocks, rows and modules can easily adapt to the conditions at site. With limited floor space available the units can be built vertically, with limited height horizontally.

德國Herding GmbH過濾器

Dust removal – custom made

Due to its variability of the DELTASys-system the discharge equipment can be chosen, e.g. as a rotary air lock, dust bin or forklift support dust bin. Even removal of retrofitted components is possible due to standardized components and flanges.
More excellent characteristics of this design are the Herding-DELTA-filter elements, which can be installed horizontally from the clean gas side. The so called Down-flow-Principle is also used with the DELTASys-system.

Down-flow-principle

The down-flow-principle is based on the idea to direct the raw gas flow in the same direction as the dust removal. Thus the dust removal process is more efficient.

ALPHASys from ca. 6.000 m³/h to ca. 18.000 m³/h

HERDING®-filter modular system for high temperatures

The HERDING®-ALPHA-filter elements are horizontally mounted in "clusters” from the clean gas side. Several clusters are installed on top of each other and generate a "filter block”. Several filter blocks are arranged adjacent to each other, which makes a filter unit. Depending on the available space filter units can be arranged as a "double row”, if an access from two sides is possible.

Design of the filter system:

Sample for appr. 17.000 m³/h with a face velocity of ca. 1,3 m³/m²/min.


Top View (double row)	Front View (filter unit)	Side View (double row)

DELTA Force Filtration

The Innovative, Effective Solution to Coolant and Wastewater Filtration -
Utilising a „True Permanent Media“

Herding GmbH Filtertechnik has introduced together with the Monlan Group next generation of filter aid free
„Permanent Medium Filtration“. The new Delta Force Filtration™ system eliminates disposal media and reduces the costs of operation. Applications for this new filter include general machining and grinding for individual machines or central systems, and wash water filtration.

The Delta Force Filtration system provides a constant dependable flow of clean process Fluid back to the machine. These Filters utilise a vacuum system to draw dirty process Fluid through the Herding® Permanent Filter element. Customers will see a reduction in their maintenance and operation costs by eliminating media change out and disposal media purchase. With no media to dispose of and no filter aid disposal, waste hauling charges will be reduced.

Features

Permanent back flushable media Eliminates maintenance and disposal media costs
Back flushes with clean process Fluid no additional Fluids or large volume of air is required
Integral drag out system for removal of solids
Removal of particulate down to 10 Micron level
Flow rate nominal 80 l per LPM per m² filter area
100 % filtration - no bypassing of solids or cake build up is necessary to maintain 10 Micron filtration level

Benefits

Tramp Oils do not effects process flow rate
Cleaner Fluids results in longer tool life, fewer wheel dressings, better surface finishes, higher production rates
and improved housekeeping
Eliminates the disposal media and filter aid waste stream adhering to ISO EN 14001

System Operation

The dirt laden liquid enters the system via gravity or transfer pump flowing into the receiving tank where The filtration process takes place. Located in the process tank are manifolds of Herding® Permanent Media Filter elements. The process Fluid is drawn through these patented sintered plastic elements, collecting the particles on the filter element surface. When the system vacuum switch reaches its set point, a back flushing cycle is initiated. A series of actuated valves along with a back flushing pump will clean each filter in series without interrupting the clean flow back to the machining Centres.

Filter Tank

The tankage is composed of two (2) sections. The Receiving tank contains the filter elements and drag out Conveyor system. The regeneration tank acts as the Reservoir from which clean Fluid is drawn during the Back flushing cycle.

Applications

•	All Grinding Applications
•	General Machining
•	Honing & Gear Cutting
•	Wastewater Filtration
•	Central Systems
•	Retrofit of Existing Systems

Sample	Coolant	before Delta Force Filtration Number of Particles 5 Micron & Above	After Delta Force Filtration Number of Particles 5 Micron & Above	Effectiveness
Machining of Cast	Semi-Synthetic 8% Concentration	2,681	93	96,5%
Aluminium & Brass Chips, Steel Grinding Swarf	Synthetic Coolant 10% Concentration	3,971	210	95,0
Aluminium & Brass Chips, Steel Grinding Swarf	Semi-Synthetic 5% Concentration	2,447	169	93,0

Special Herding® products

• Quick-Top / top filter, easy to be installed for bunker and for pneumatic conveyance

• filter elements Herding-DELTA 1200 -12/9 SC for laser application

• WIP-Option (washing in place) / cleaning of filter elements while installed, e.g. during a product change

• fire protection equipment

• units with pressure relief during explosion

• pressure resistant housings during explosion

• HERDING® pharma-compact filter

測試儀表過程儀表工業儀表差分測量?jī)x 不銹鋼表殼壓力表衛生儀表商業儀表

Model/Description	Dial Size	Accuracy	Features	Wetted Materials	Available Ranges
2089, 2086 and 2084 - Precision Digital Test Gauges	3"	±0.05%, ±0.10% or ±0.25% of span	300 Series SS protective cover, protective carrying pouch	316 Stainless Steel connection	vac., 5 psi thru 7,000 psi including compound and absolute
A4A - Dial Pressure Gauge	6G, 8.5", 12", & 16"	±0.10% of span - ASME B40.1, Grade 4A	Standard: solid front, mirror band dial, knife-edge pointer, external zero adjust, bleeder tip. Optional: temperature compensation, slotted link, peak load indicator, wall mount, various inlet fittings.	Beryllium copper or 403 Stainless Steel, 303 Stainless Steel	Gauge, compound, vacuum & absolute 0-15-0/100,000 psi
1082 - Pressure Test Gauge	4.5", 6", 8.5"	ASME B 40.1 Grade 3A (±0.25% of span)	Temperature compensated, rotary geared movement, external zero adjust, mirror band dial	Bronze/brass, Monel	vac. to 10,000 psi
1084 - Pocket Test Gauge	3"	ASME B 40.1 Grade 2A (±0.5% of span)	Internal zero adjust, mirror band dial	316 Stainless Steel	vac. to 1,000 psi

Model/Description	Dial Size	Accuracy	Features	Wetted Materials	Available Ranges
1259 - Pressure Gauge	4.5"	ASME B 40.1 Grade 2A (±0.5% of span)	Solid front safety case, as-welded Bourdon tube, solid front case design, liquid fillable	316 Stainless Steel, Monel	vac. to 20,000 psi including compound
1279 - Duragauge® Pressure Gauge	4.5"	ASME B 40.1 Grade 2A (±0.5% of span)	PLUS!™ Performance, Duratube as-welded tube construction, burn resistant phenol case, teflon coated 400 series movement, solid front case design™, rotary geared movement, liquid fillable	316 Stainless Steel, bronze/brass, monel	Compound, vacuum to 30,000 psi
1279, 1379, 1377, 2462 - Receiver Gauges	4.5", 6", 8.5"	ASME B 40.1 Grade 2A (±0.5% of span)	PLUS!™ Performance, Duratube™ as-welded tube construction, Teflon coated 400 series movement, solid front case design™, rotary geared movement liquid fillable.		3-15 psi and 3-27 psi
1377 - Duragauge® Pressure Gauge	4.5", 6", 8.5"	ASME B 40.1 Grade 2A (±0.5% of span)	PLUS!™ Performance, Duratube as-welded tube construction, Teflon coated 400 series movement, solid front case design™, rotary geared movement	316 Stainless Steel, bronze/brass, Monel	Compound, vacuum to 30,000 psi
1379 - Duragauge® Pressure Gauge	4.5", 6", 8.5"	ASME B 40.1 Grade 2A (±0.5% of span)	PLUS!™ Performance, Duratube as-welded tube construction, Teflon coated 400 series movement, solid front case design™, rotary geared movement, liquid fillable	316 Stainless Steel, bronze/brass, Monel, Inconel	Compound, vacuum to 100,000 psi
2462 - Duragauge® Pressure Gauge	6"	ASME B 40.1 Grade 2A (±0.5% of span)	PLUS!™ Performance, Duratube™ as-welded tube construction, Teflon coated 400 series movement, solid front case design™, rotary geared movement	316 Stainless Steel, bronze/brass, steel, Monel	vac. to 30,000 psi including compound
2279 - Duratran® Pressure Transmitter	4.5"	±0.5%	PLUS!™ Performance, 4 to 20 mA output gauge, FM approved, Instrinsically Safe with barriers	316 Stainless Steel, Monel	Vacuum and compound, 12 to 20,000 psi

Model/Description	Dial Size	Accuracy	Features	Wetted Materials	Available Ranges
1010 - Industrial Gauge	4.5", 6", 8.5", 12"	ASME B 40.1 Grade 1A (±1% of span)	PLUS!™ Performance, rotary geared movement, stem/surface mount	Stainless Steel, Brass, Monel	vac. to 30,000 psi
1009, 1010, 1017 & 1220 - Hydraulic Gauges	4.5", 6", 8.5", 12"	ASME B 40.1 Grade 1A (±1% of span)	Stainless Steel, aluminum and phenolic case materials		vac. to 30,000 psi
1009, 1010, 1017 & 1220 - Refrigeration Gauges	4.5", 6", 8.5", 12"	ASME B 40.1 Grade 1A (1% of span)	Stainless Steel, phenolic and aluminum case materials, wide range of refrigerant scales including refrigerant 134A and ammonia		30 in.Hg vac./150 psi, 30 in.Hg vac./300 psi
1009, 1010, 1017, 1220 - Receiver Gauges	4.5", 6", 8.5", 12"	ASME B 40.1 Grade 1A (±1% of span)	Open-front case style, panel mount, stem mount and wall mount		3/15 and 3/27 psi
1017 - Industrial Gauge	4.5", 6"	ASME B 40.1 Grade 1A (1% of span)	PLUS!™ Performance, rotary geared movement, stem/flush mount	Stainless Steel, Brass, Monel	vac. to 30,000 psi
1220 - Industrial Gauge	4.5", 6", 8.5"	ASME B 40.1 Grade 1A (±1% of span)	PLUS!™ Performance, rotary geared movement, stem/flush/surface mount	Steel, Stainless Steel, Brass, Monel	vac. to 30,000 psi
1038A - Duplex Gauge	3.5", 4.5"	ASME B 40.1 Grade A (±2-1-2% of span)	Indicates two independent pressures, stem/flush, surface mount	Copper Alloy	30 psi to 1,000 psi
1339A - Duplex Gauge	4.5"	ASME B 40.1 Grade A (±2-1-2% of span)	Indicates two independent pressures	Copper Alloy	30 psi to 1,000 psi
1122 - Industrial Gauge	2.5"	ASME B 40.1 Grade A (±2-1-2% of span)	Gauge for pumps, turbines, and compressors	Copper Alloy	15/1,000 psi
1150H - Reid Vapor Gauge	4.5"	ASME B 40.1 Grade 2A (±0.5% of span)	Measures vapor, pressure of petroleum products	Copper Alloy	15/600 psi
1187,1188,1189 - Low Pressure Bellows Gauge	4.5", 6"	ASME B 40.1 Grade A (±2-1-2% of span)	Bellows-actuated, stem/flush/surface mount	Stainless Steel, Brass, Monel	10 in.H2O to 10 psi including Vacuum and compound
1490 - Low Pressure Diaphragm Gauge	2.5", 3.5"	ASME B 40.1 Grade A (±2-1-2% of span)	Low pressure, diaphragm gauge	Copper, Brass, Polysulfone, RTV, Silicone	0/10 in.H2O to 0/15 psi including Vacuum and compound
1495 - Low Pressure Receiver Gauge	2.5", 3.5"	ASME B 40.1 Grade A (±2-1-2% of span)	Low pressure, diaphragm gauge	Copper, Brass, Polysulfone, RTV, Silicone	0-99.9%, 0-10 sq. rt., 0-10 sq.rt./0-100 linear

Model/Description	Dial Size	Accuracy	Features	Wetted Materials	Available Ranges
1125 - Differential Pressure Gauge	4.5", 6"	ASME B 40.1 Grade A (±2-1-2% of span)	Stem/flush/surface mount	Copper Alloy	20/1,000 psi
1127 - Differential Pressure Gauge	4.5", 6"	ASME B 40.1 Grade A (±2-1-2% of span)	Stem/flush/surface mount	Stainless Steel	10/1,000 psi
1128 - Differential Pressure Gauge	4.5", 6"	ASME B 40.1 Grade A (±2-1-2% of span)	Zero at 12 o'clock, stem/flush/surface mount	Stainless Steel	10/0/10 psi to 400/0/400 psi
5503 - Differential Pressure Gauge	100 mm, 160 mm	±1.6% of span	Stem/surface/pipe mount	Stainless Steel, Duratherm 600	0-16 IWD to 400 psid
5509 - Differential Pressure Gauge	100 mm, 160 mm	±2.5% of span	Stem/surface/pipe mount	Stainless Steel, Duratherm 600	0-10 IWD to 400 psid
1130 - Differential Pressure Gauge	2", 2.5", 3.5", 4", 4.5", 6"	±2% Ascending	Piston actuator, high static low differential pressures, in-line, lower, back connections	Aluminum body, Brass body, Stainless Steel body (Buna o-ring)	0-5 psid to 150 psid
1131 - Differential Pressure Gauge	2.5", 3.5", 4", 4.5", 6"	±2% Ascending	Rolling diaphragm actuator, high static low differential pressures, in-line, lower, back connections	Aluminum body, Brass body, Stainless Steel body (Buna diaphragm)	0-5 psid to 100 psid
1132 - Differential Pressure Gauge	2.5", 3.5", 4", 4.5", 6"	±2% Ascending	Small convoluted diaphragm actuator, high static low differential pressures, in-line, lower, back connections	Aluminum body, Brass body, Stainless Steel body (Buna diaphragm)	0-1 psid to 60 psid (including inches of water ranges)
1133 - Differential Pressure Gauge	3.5", 4", 4.5", 6"	±2% Ascending	Large convoluted diaphragm actuator, high static low differential pressures, in-line, lower, back connections	Aluminum body (Buna diaphragm)	0-1 IWD to 25 IWD
1134 - Differential Pressure Gauge	4.5"	±2% Ascending	Smooth pointer motion, rugged magnetic coupling design, flush mounting accessories standard, low cost switch option available	Glass filled nylon, aluminum, Buna diaphragm	0-0.5 IWD to 50 IWD

Model/Description	Dial Size	Accuracy	Features	Wetted Materials	Available Ranges
1008A/AL - Stainless Case/Crimped Ring, Liquid Filled, Dry or Field Fillable General Purpose Gauges	63 mm (2.5"), 100 mm (4")	ASME B 40.1 Grade B (±3-2-3% of span)	Optional mounting kits for back connect gauges, PowerFlex™ movement, True Zero™, FlutterGuard™ (optional)	Bronze/Brass	vac. - 15,000 psi and compound
1008S - Stainless Steel Pressure Gauge	40 mm (1.5"), 50 mm (2")	ASME B 40.1 Grade B (±3-2-3% of span)	True Zero™, stem/flush mount	316 Stainless Steel	vac. to 15,000 psi
1008S - Stainless Steel Pressure Gauge	63 mm, 100 mm	ASME B 40.1 and EN837-1, Accuracy 1.6% Full Scale	NEW DESIGN, Plus!™ Performance, True Zero™, PowerFlex™, movement, stem/flush mount	316 Stainless Steel	vac. to 15,000 psi
1008S/SL - Stainless Steel Pressure Gauge	63 mm, 100 mm	ASME B40.1 Grade B (±3-2-3% of span)	Center back connection only	316 Stainless Steel	vac. to 20,000 psi
1009 - Stainless Steel Pressure Gauge	4.5", 6"	ASME B 40.1 Grade 1A (±1% of span)	PLUS!™ Performance, stem/flush/surface mount	Steel, Stainless Steel, Brass, Monel	vac. to 30,000 psi
1009 - Stainless Steel Pressure gauge - Duralife® Pressure Gauge	2.5", 3.5"	ASME B 40.1 Grade 1A (±1% of span)	PLUS!™ Performance, True Zero™, PowerFlex™ movement, stem/flush mount	Stainless Steel, Brass	vac. to 15,000 psi
1020S - Christmas Tree Gauges	4.5"	ASME B 40.1 Grade 1A (±1% of span)	Designed for the oil fields	Stainless Steel tube, steel socket	1,000/20,000 psi
1109 - Stainless Case Pressure Gauge	4.5"	ASME B 40.1 Grade 1A (±1% of span)	PLUS!™ Performance	Stainless Steel, Monel, Inconel	SD: vac. to 1,500 psi/2,000-20,000 psi; WD: 50,000-100,000 psi
3005 - Stainless Case Pressure Gauge - Liquid Filled, Dry or Field Fillable General Purpose Gauges 63 mm	63 mm (2.5")	ASME B 40.1 Grade B (±3-2-3% of span)	Optional mounting kits for back connect gauges, PowerFlex™ movement, True Zero™, FlutterGuard™ (optional)	Bronze/Brass	vac.-15,000 psi and compound

Model/Description	Dial Size	Accuracy	Features	Wetted Materials	Available Ranges
1032 - Sanitary Pressure Gauge	2.5", 3.5', 4.5"	±1.5% F.S. for pressure ranges 100 psi and above. ±2.0% F.S. for Vacuum, compound and ranges below 100 psi	1.5" or 2.0" Tri-Clamp, 3A compliant, PLUS!™ Performance, True Zero™, glycerin filled system	Electropolished 12 to 20 RA surface finish (Stainless Steel)	15 psi thru 1,000 psi, including compound and Vacuum
1032 - Fractional Sanitary Pressure Gauge	2"	±3% upscale accuracy; up to ±5% downscale accuracy	0.75" Tri-Clamp, glycerin filled system	Electropolished 15 to 20 RA surface finish (Stainless Steel)	30 psi thru 600 psi, including compound
1036 - Sanitary Pressure Gauge	3.5"	±1.5% F.S. for pressure ranges 100 psi and above. ±2.0% F.S. for Vacuum, compound and ranges below 100 psi	1.5" Tri-Clamp, PLUS!™ Performance, True Zero™, Glycerin filled system, mates with the 1037 Instrument Fitting	Electropolished 12 to 20 RA surface finish (Stainless Steel)	15 psi thru 1,000 psi, including compound and Vacuum
2032, 2132, 2232, 2036, 2136, 2236 - Digital Sanitary Pressure Gauge			Industry Leading Features Include: 4/20 mA Output; (1) or (2) SPDT Switches; 0.25% F.S. Terminal Point Accuracy .13 BFSL); IP 65 Weatherproof Case Suitable for Wash Downs; Extra Large Display; Easy-to-Use Password Protected Menu with: 5 Backlite Display Options, 12 Engineering Units, Menu Configure Feature, Update Rate, Dampen Rate, and Auto-Off; Material Traceability Certification to EN 10204:2004 3.1	17-4 pH Stainless Steel (Sensor), 316 Stainless Steel (socket)	15 psi/Vac thru 1000 psi
1037 - Sanitary Instrument Fitting	.50:, .75", 1", 1.5", 2"	N/A	1.5" Tri-Clover, instrument connection, minimal deadleg, flow through design	Electropolished 12 to 20 RA surface finish	N/A

Model/Description	Dial Size	Accuracy	Features	Wetted Materials	Available Ranges
1005P - General Purpose Dry Gauge - ABS Case	1.5", 2", 2.5", 3.5"	ASME B 40.1 Grade B (±3-2-3% of span)	PowerFlex™ movement, True Zero™, FlutterGuard™ (optional), Optional Panel Mount Sleeve	Bronze/brass	vac.-6,000 psi and compound
1005 - General Purpose Dry Gauges - Steel Case	1.5", 2", 2.5", 3.5"	ASME B 40.1 Grade B (±3-2-3% of span)	PowerFlex™ Movement, True Zero™, FlutterGuard™ (optional)	Bronze/Brass	vac.-6,000 psi and compound
1005S - General Purpose Dry Gauges - Stainless Steel Case	1.5", 2"	ASME B 40.1 Grade B (±3-2-3% of span)	PowerFlex™ movement, True Zero™, FlutterGuard™ (optional)	Bronze/Brass	vac.-600 psi and compound
1000 - General Purpose Dry Gauge - Steel Case	4.5"	ASME B 40.1 Grade B (±3-2-3% of span)	PowerFlex™ movement, True Zero™, Flutterguard™ (optional)	Bronze tube, Brass Socket	vac. thru 6,000 psi and compound
1001T - General Purpose Dry Gauge - Steel Case	1.5", 2", 2.5", 3.5"	ASME B 40.1 Grade B (±3-2-3% of span)	Front Flange available in 2" or 2.5", PowerFlex™ movement, True Zero™, FlutterGuard™ (optional)	Bronze/Brass	vac.-6,000 psi and compound
1008A/AL - General Purpose Gauges - Stainless Case/Crimped Ring, Liquid Filled, Dry or Field Fillable	63 mm (2.5"), 100 mm (4")	ASME B 40.1 Grade B (±3-2-3% of span)	Optional mounting kits for back connect gauges, PowerFlex™ movement, True Zero™ FlutterGuard™ (optional)	Bronze/Brass	vac.-15,000 psi and compound
3005 - General Purpose Gauges - Stainless Case Liquid Filled, Dry or Field Fillable	63 mm (2.5")	ASME B 40.1 Grade B (±3-2-3% of span)	Optional mounting kits for back connect gauges, PowerFlex™ movement, True Zero™, FlutterGuard™ (optional)	Bronze/Brass	vac.-15,000 psi and compound
3005P - General Purpose Gauges - ABS Case, Liquid Filled or Dry	63mm (2.5")	ASME B 40.1 Grade B (±3-2-3% of span)	PowerFlex™ movement, True Zero™, FlutterGuard™ (optional)	Bronze/Brass	vac. - 15,000 psi and compound
, X1005PUL - Sprinkler Gauge - 1005P - ABS Case Gauge	3.5"	ASME B 40.1 Grade B (±3-2-3% of span)	UL 393 Listed, ULC of Canada Listed, FM Approved, PowerFlex™ movement, True Zero™	Bronze/brass	0-300 psi (water), 0-80 psi retard to 250 psi (air)
1007P, XOR - Refrigeration Manifold Test Gauges - ABS Case Gauge	2.5"	1% at zero, 2% three fourths of scale, 5% last fourth of scale	PowerFlex™ movement, True Zero™, FlutterGuard™ (optional)	Bronze/brass	vac./0/120 psi retard to 250 psi, 0-500 psi; vac./0/500 psi retard to 800 psi, 0-800 psi (optional, alternate refrigerant ranges)
1001T, XOR - Refrigeration Gauges - 1001T, XOR - Refrigeration Gauges	2.5", 3.5"	1% at zero, 2% three fourths of scale, 5% last fourth of scale	PowerFlex™ movement, True Zero™, FlutterGuard™	Bronze tube, Brass socket	30 in.Hg vac./0/120 psi retard to 250 psi; 0-500 psi; 30 in.Hg vac./0/350 psi retard to 500 psi; 0-800 psi
1005M, XRG - Agricultural Gauge - 1005M, XRG - Agricultural Gauge.	2.5"	ASME B 40.1 Grade B (±3-2-3% of span)	PowerFlex™ movement, True Zero™, FlutterGuard™ (optional)	316 Stainless Steel/Steel	0/60 psi, 0/150 psi, 0/400 psi
2071A - Contractor Gauges - 2071APP - Contractor Gauges	4.5"	ASME B 40.1 Grade A (±2-1-2% of span)	PowerFlex™ movement, True Zero™, FlutterGuard™ (optional)	Bronze/Brass soldered, siphon required for steam service	vac.-600 psi and compound
23DDG - MiniGauge Pressure Gauge - 23DDG PP - Mini Pressure Gauges	23 mm (0.906")	±5% of span	Direct Drive Technology	Beryllium copper tube/Brass socket	60 psi-100 psi (180 dial arc); 160 psi-300 psi (235 dial arc)
12DDG, 15DDG - Direct Drive Gauges - 12DDG - Direct Drive Gauges	1.25", 1.5"	Standard ±2.0% at Set Point	Direct Drive Technology	Beryllium Copper tube/Brass socket	0/60 psi, 0/100 psi, 0/160 psi, 0/200 psi, 0/300 psi, 0/700 psi, 0/1,200 psi, 0/1,500 psi, 0/2,000 psi, 0/3,000 psi, 0/4,000 psi
40DDG, 50DDG - Direct Drive Gauges - ABS Case	40 mm (1.5"), 50 mm (2")	ASME B 40.1 Grade B (±3-2-3% of span)	Direct Drive Technolgy	Beryllium copper coil, silicon dampened integral ABS polycarbonate blend socket	0-60 psi (180° arc); 0-100 psi, 0-160 psi, 0-200 psi, 0-300 psi, 0-400 psi (235° arc)
MFX - Fire Extinguisher Gauges - 40_50DDGPP - Direct Drive Gauge	1.25", 1.5"	Conforms to applicable UL Specs	Direct Drive technology, UL listings: 299, 626, 1058, 1093	Beryllium Copper/Brass	Maximum scale pressure from 200 psi to 4,000 psi
D1005PS - General Purpose Digital Gauge - 1005GPDigPP - Digital Gauges	2.5"	±0.5% of span	Standard: .5" LCD digits, 4.5 digit display, 2.5" Noryl® case, SS socket & sensor. Peak hold and 9 selectable engineering units. CE approved; Optional: 0.25% accuracy. Backlite display. Optional protective rubber boot	17-4 pH Stainless Steel sensor, 316 Stainless Steel socket	vac. thru 19,99