常州市天澤干燥設備有限公司多年來一起致力于干燥設備、制粒設備的科研開發及企業經營管理。公司重視科技創新，始終認為：科學技術是*生產力。與國內有關科研院所合作開發新品，吸收消化國內外*干燥及制粒設備，以適應現代企業生產的需要。工廠備有完善的試驗室，歡迎新老客戶帶料試驗，考察訂貨。調味料、氨基酸、石墨烘干機天澤牌噴霧干燥機
噴霧干燥是液體工藝成形和干燥工業中應用的工藝。適用于從溶液、乳液、懸浮液和糊狀液體原料中生成粉狀、顆粒狀固體產品。因此，當成品的顆粒大小分布、殘留水份含量、堆積密度和顆粒形狀必須符合精確的標準時，噴霧干燥是一道十分理想的工藝。
| Specifications |
| Centrifugal spray dryer: |
| 1,The powder was made from solution directly. |
| 2,fast in drying, uniform in size, good in fluidity. |
| 規范 |
| 離心噴霧干燥機: |
| 1、溶液可直接制成粉末狀。 |
| 2、干燥速度快，粒度均勻，流動性好。 |
| Description of centrifugal spray dryer: |
| The spray drying is the widest used technology in the liquid shaping technology and in the drying industry. It is most suitable for producing powder, particle, or block solid products from materials of solution, emulsion, soliquoid and pumpable paste states. Therefore, when the particle size and distribution of the final products, their residual water contents, the stocking density and the particle shape meet the precision standards, the spray drying is one of the most desired technologies. |
| 離心噴霧干燥機描述: |
| 噴霧干燥是液體成型技術和干燥工業中應用廣泛的技術。適用于從溶液、乳液、固形物和可泵送的糊狀物料中生產粉狀、顆粒狀或塊狀固體產品。因此，當zui終產品的粒度和分布、殘余含水量、密度和顆粒形狀均達到精度標準時，噴霧干燥是理想的工藝之一。 |
| Features of centrifugal spray dryer: |
| 1, High speed of drying. After the spraying of he material liquid, the surface area of the material will be increased greatly. In the hot-air flow, 95%-98% of water can be evaporated at a moment. The time of completing the drying needs only several seconds. |
| 2, It is especially suitable for drying the heat sensitive materials. It’s final products own the good uniformity, mobility, dissolving capacity. And the final products are high in purity and good in quality. |
| 3, The production procedure is simple and the operational control is easy. The liquid with the moisture contents 40-60%(for special materials, the contents may reach 90%) can be dried into power or particle products once a time. After the drying, there is no need for smashing of sorting, so as to reduce the operation procedures in the production and enchance the purity. The product particle diamenters, looseness and water contents can be adjusted through changing the operation condition in a certain scope. It is very convenient to carry out the control and management. |
| 離心噴霧干燥機的特點: |
| 1、干燥速度快。噴涂原材料液后，材料的表面積將大大增加。在熱風流動中，95%-98%的水可以瞬間蒸發。干燥完成只需幾秒鐘。 |
| 2、特別適用于熱敏性物料的干燥。產品具有良好的均勻性、流動性、溶解能力。產品純度高，質量好。 |
3、生產工藝簡單，操作控制簡單。水分含量40-60%的液體(特殊物料可達90%)可一次干燥成粉狀或顆粒狀產品。干燥后無需粉碎分選，減少了生產中的操作程序，提高了產品的純度。通過在一定范圍內改變操作條件，可以調節產品的粒度、疏松度和含水量。 |
| 適用范圍： |
| 化工：有機催化劑、樹脂、合成洗衣服、油脂類、染料、染料中間體、石墨等。 |
| 食品：氨基酸及類似物、調味料、蛋白質、淀粉、乳制品、咖啡提取物、魚粉、肉精等 |
| 制藥：中成藥、農藥、抗生素、醫藥沖劑等。 |
| 陶瓷：氧化鎂、瓷土、各種金屬氧化物、白云石等。 |
| 注：易燃易爆物品禁用。 |
| 訂貨須知： |
| 1、物料名稱、屬性：含固量或含水量，粘度、表面張力、PH值。 |
| 2、干燥后粉料容量、允許殘余含水量、粒度、允許*溫度， |
| 3、產量：每天工作時長。 |
| 4、可供能源：蒸汽壓力可供量、電容量、可供燃煤、油、氣量。 |
| 5、控制要求：進、出口溫度是否需要自控。 |
| 6、授粉要求：是否安裝袋式捕集器，環境對排放尾氣要求。 |
采購中心
