Model 7 and Model 7A
FIGURE 1 (Can be mounted on any micropropositioner for use with any probing system.)
PICOPROBE® MODEL 7 was designed as a companion probe to Models 12C and 18C for driving integrated circuit lines so the Model 12C and 18C can be used to measure the response of adjacent nodes. The Model 7 consists of a flexible 6 foot, 50 ohm coaxial cable accurately terminated to 50 ohms in order to avoid undesirable reflections. A special miniature connector receives replacement coaxial probe tips that provide a shielded environment to within 3 mm of the fine tungsten probe point, thus minimizing capacitive coupling to other parts of the circuit. The replaceable coaxial probe tips are offered in various point sizes and can also be bent to any shape in order to accommodate a variety of probing geometries.
PICOPROBE® MODEL 7A, an unterminated version, can be used for capacitance and resistance measurements or in low to medium speed signal applications where a 50 ohm termination is not required. A flexible coaxial cable length of 6 feet in length is standard on the Model 7A; however, when used for capacitance measurements, GGB Industries, Inc., recommends using a shorter 3 foot cable. If a shorter length of cable is desired for capacitance measurements, please specify it when ordering (Model 7A-3ft.). Please note that Model 7A uses Model 7 replacement tips.High Temperature Option For elevated temperature applications up to 200 degrees C., Picoprobe® Models 7-HT and 7A-HT can be used in place of the Model 7 and 7A, respectively. Models 7-HT and 7A-HT use special temperature resistant probe tips that provide accurate test results under extreme conditions.
Model 7 and Model 7A Replacement Tips Part
NumberTungsten Probing Wire
Shaft DiameterPoint Radius 7-5 5 micron <0.1 micron 7-10 10 micron <0.1 micron 7-22 22 micron <1.0 micron 7-35 35 micron <2.0 micron 7-60 60 micron <3.0 micron 7-125 125 micron <5.0 micron 7-175 175 micron <5.0 micron FIGURE 2 * Specify high temperature tips by adding an "HT" suffix to the Model 7 and 7A replacement tip part number.
深圳市森東寶科技有限公司（Cindbest）是一家專業從事探針臺設備的研發、生產和銷售，并集成代理相關實驗室設備的綜合性。主營產品有：探針臺、激光測試儀、GGB高頻微波探針、蜂窩式光學平臺、I-V/C-V參數測試儀、3D白光干涉儀等相關實驗室設備，其中探針臺系列產品均已獲得國家，同時通過運用現代質量管理的科學理念和*方法，我司順利通過了ISO9001質量管理體系認證，并且為深圳市質量檢驗協會的理事單位之一。 Cindbest總部位于廣東省深圳市，并在香港、上海、長沙、西安、成都等城市均設有銷售網點，公司成立至今，已合作過近200家高校（含國內95%的985,211高校），30多家科研院所以及20多家半導體行業大型公司，與此同時Cindbest已成長為國內探針臺的主要生產供應商。 公司秉持著“以客戶為本，以實現實驗目的，助力中國半導體發展為目標”的經營理念發展前行。憑借優秀的產品、高質量的服務、高度認真負責的態度，全面打造公司的核心競爭力，為客戶和社會創造價值，贏得了廣大客戶和社會的*.
光學平臺
Model 7 and Model 7A(dc to 500 Mhz, 50 ohm) 產品信息
在找 Model 7 and Model 7A(dc to 500 Mhz, 50 ohm) 產品的人還在看
采購中心
