LS-450LED光源
| LS-450藍色脈沖光源為LED，產生脈沖或連續輸出470 nm--藍色區域-用于熒光測量。該光源設計為與Ocean Optics 光譜儀一起用于熒光測量，帶FOXY光纖氧傳感器 ，和取樣光學件如CUV-UV-ALL 4-way 試管固定器。 |
特點
激勵電源。用于高靈敏度的熒光測量，產生脈沖或連續輸出470 nm。
軟件選擇。通過手動或軟件操作控制燈泡的開關，用于脈沖或連續模式。
同時探測器掃描速度。通過等或光譜儀上的模塊構成燈泡脈沖速率。
LS-450通過手動或軟件操作控制燈泡的開關，用于脈沖或連續模式。也可與LS-450一起為其它特殊LED波長(見下) 使用。
LS-450單機版
通過一個界面電纜LS-450與光譜儀連接，使用了SMA905連接器。你能通過光源或S2000光譜儀的電路板上的跳動模塊配置操作電源。
也可為LS-475脈沖藍色LED, 以其波長和電扇冷卻為特征（475 nm）
機架固定版
R-LS-450藍色LED為LS-450的機架固定版。對于限制桌面或架盒空間的多個LED使用者，R-LS-450-2 (2 LEDs)機架固定版為另一個選擇。你能通過R-LS-450電路板上的動模塊配置R-LS-450和R-LS-450-2操作。
另外。LS-450 可安裝在SF2000 光譜儀上。LS-450裝在一張卡上，與光譜儀裝在同一個盒中。
LS-450與USB2000光譜儀一起使用
通過光譜儀的 10-pin 連接器，USB-LS-450 模塊與 USB2000光譜儀連接在一起。光譜儀提供LED能量也保證了同樣的功能和I2C通信。通過增加一個取樣光學 元件和與筆記本電腦連接的界面。SB2000-with-USB-LS-450 提供了一個便利的，便攜的系統。
對FOXY使用者有利
USB-LS-450 內嵌了24-bit模擬數字轉換器，構成了一個100 ohm platinum RTD。USB-LS-450抯可存儲溫度和氧校準系數。
LS-450說明書
| LS-450, R-LS-450, R-LS-450-2 | USB-LS-450 Drive Module | |
物理尺寸 | 90 mm x 50 mm x 32 mm (LS-450 only) | 89 mm x 102 mm x 38 mm |
能量消耗 | 25 mA @ 12 VDC | 60 mA @ 5 VDC |
能量輸出（最?。?/font> | 50 礧 into 600 祄 fiber | 60 礧 into 600 祄 fiber |
穩定性 | <1.0% after 2-minute warm-up | <1.0% after 2-minute warm-up |
LED驅動電流 | NA | 20 mA +/-150 mA |
LS-450定購信息
| Item | Description |
| LS-450 | Blue LED produces output at 470 nm; includes interface cable to S2000; can be mounted with an S2000 or installed into rack or desktop boxes |
| R-LS-450 | Rack-mounted version of Blue LED produces output at 470 nm; includes interface cable to S2000 |
| R-LS-450-2 | Rack-mounted version of dual Blue LEDs produces output at 470 nm; includes interface cable to S2000 |
| USB-LS-450 | Multi-purpose LED module for USB2000-FL Spectrometers has built-in 24-bit A/D converter to accommodate a 100 ohm Resistance Temperature Device; also has on-board memory to store temperature and oxygen calibration coefficients when used with FOXY Oxygen Sensors |
| USB-LS-450-4/20 | Add-on to USB-LS-450 LED drive module provides 4-20 mA output. |
| USB-LS-450-TP | Platinum 100 ohm Resistance Temperature Device, for use with USB-LS-450 LED module. |
其它LED選擇
如果安裝在LS-450上的470-nm波長燈泡不是你應用的正確激勵電源，你可以很容易的卸掉它，裝上下面所列的合適LED。每個燈泡有12.7-mm 反射管，易于安裝和排列
| Item | Description | Color | Power* |
| LED-380 | 380 nm wavelength UV LED used in place of the 470 nm bulb in the LS-450 | UV | 45 礧 |
| LED-395 | 395 nm wavelength VIS LED used in place of the 470 nm bulb in the LS-450 | Violet | 25 礧 |
| LED-518 | 518 nm wavelength VIS LED used in place of the 470 nm bulb in the LS-450 | Green | 35 礧 |
| LED-590 | 590 nm wavelength VIS LED used in place of the 470 nm bulb in the LS-450 | Yellow | 40 礧 |
| LED-640 | 640 nm wavelength VIS LED used in place of the 470 nm bulb in the LS-450 | Red | 50 礧 |
| LED-WHITE | 450-630 nm wavelength VIS LED used in place of the 470 nm bulb in the LS-450 | White | 50 礧 |
| LED-KIT | Set of 6 LEDs: LED-380, LED-395, LED-518, LED-590, LED-640 and LED-WHITE | Mixed | Mixed |
(*Power into a 600 祄 Patch Cord Optical Fiber Assembly)
LED Bulbs: 380 nm, 470 nm, 518 nm and 640 nm
采購中心
