跌落試驗機

falling and evaluating the impact strength during transportation and handling. This testing machine is designed to simulate the testing of all kinds of products after packaging in the process of handling or transportation, caused by degeneration of the product internal damage evaluation, so as to get the best solution, in order to minimize the loss in transit; This tester can test the rind, Angle and surface of the packing container.
跌落高度：300~1500mm
試件大重量：100kg 
試件大尺寸：(L×W×H)500*500*700mm
跌落面板面積：(L×W)1500×1000mm 
托臂尺寸：290×240×8mm 
控制箱尺寸：(L×W×H)350×350×1100mm 
機臺重量：450kg 
電源：1∮ ,AC380V,50Hz 
傳動方式：電動傳動
雙向跌落，可移動。
Drop height: 300~1500mm
Maximum weight of specimen: 100kg
Maximum size of specimen :(L×W×H)500*500*700mm
Area of drop panel :(L×W)1500×1000mm
Arm size: 290×240×8mm
Control box size :(L×W×H)350×350×1100mm
Machine weight: 450kg
Power supply: 1 wire,AC380V,50Hz
Drive mode: electric drive
Two-way drop, movable.

結構特點：
1、采用重型槽鋼座配減震橡膠，運行平穩且拆機容易
2、工作臺為不銹鋼材料，美觀耐用
3、用鋁型材配合手輪機構固定被測產品，方便靈活
4、傳動部分采用同步靜噪皮帶，直流電機緩沖啟動，可使噪音降到
Structural features:
1, the use of heavy channel steel seat with damping rubber, smooth operation and easy to dismantle
2. The table is made of stainless steel, which is beautiful and durable

3. Fix the tested product with aluminum profile and handwheel mechanism, which is convenient and flexible
4, the transmission part adopts synchronous noise belt, dc motor buffer start, can make the noise to the minimum

性能參數
20動配置系統：跌落裝置一套，
出廠基本夾具一套， 保修卡一個， 合格證一個， 操作說明書一本
The performance parameters
20 dynamic configuration system: one set of dropping device,
Factory basic fixture set, a warranty card, a certificate, a manual