超微粉碎機
-----------------------------------------------------------------------------------------------------------------
超微粉碎機概述 Description
該系列微粉碎機由主機、輔機、電控三個部分組成,設計緊湊,結構合理,具有風選式,無篩無網。機內裝有分級機構,能使粉碎,分級一次完成。負壓輸送使粉碎作業時機腔內產生的熱量源源不斷地排出,故也適應于熱敏性物料的粉碎。本機適應范圍廣,生產過程連續進行,出料粒度可調;能處理如:化學制品、食品、藥品、化妝品、染料、樹脂、殼物等多種物料的粉碎及分級。
Model WFJ series fine grinder consists of three parts i.e. main machine, auxiliary machine and electric control. Its features are compact in design, reasonable in structure. Its principle is using air to chose and no sieve or screen . Being installed grading mechanism inside the machine, the crushing and grading can be finished at the same time. When use negative pressure to transport in the operation of crushing, the heat produced from the chamber will be remo-ved continuously. Therefore it can also be suitable for crushing thermal sensitive raw materials. The scope of application of machine is wide. Its productive process is continuous and its size of granule can be adjusted. It can crush and grade many raw materials such as chemicals, foodstuff, medicines, cosmetic, dyestuff, resin, shell materials and so on.
-----------------------------------------------------------------------------------------------------------------
超微粉碎機技術參數 Technical parameters
規格型號 Specification and model | WFJ-15 | WFJ-18 | WFJ-36 |
生產能力 Productive capacity(kg/h) | 10~200 | 20~450 | 60~1000 |
進料粒徑 Size of raw material to be fed(mm) | <10 | <12 | <15 |
出料粒度(目) Size of raw material to be discharged (mesh) | 80~320 | 80~450 | 80~450 |
總功率 Total power (kw) | 13.5 | 17.5 | 38 |
主轉速 Main revolution(r/min) | 4500 | 4480 | 4000 |
外型尺寸Overall dimensions (L×W×H)(mm) | 4200×1200×2800 | 4700×1250×2900 | 9000×1500×3800 |
注:1.以上表中參數因物料差異較大,故產量和出料細度差異亦較大。
2.脈沖除塵器用空壓機由用戶自備。
Notes: 1.The parameters listed in above table have more difference with difference with different raw materials, therefore the output and size of raw material to be discharged have difference too.
2. The air compressor used for pulse bag duster should be prepared by customer.