iCP 阿法拉伐泵 alfalaval衛生泵 商品詳細介紹
離心泵
離心泵i-CP100
阿法拉伐 i-CP100離心泵是一款針對較低應用要求的**競爭力的解決方案，同時也是標準液體、公用設施和CIP應用的理想之選。該款離心泵堅守阿法拉伐一貫的質量承諾，確保可靠、安全的生產，且易于維護。
i-CP100離心泵在設計上秉持衛生理念，符合EHEDG要求，自帶橡膠部件均符合FDA要求。
- *高流速：85立方米/小時
- *大入口壓力：400 kPa（4巴）
- 接觸液體部件的材質：不銹鋼1.4403（304L） alfalaval阿法拉伐衛生泵,LCP iCP 阿法拉伐泵 alfalaval衛生泵
iCP 阿法拉伐泵 alfalaval衛生泵 采用同一尺寸的機械密封，與LKH 單端面機封一致。
SolidC標準工況衛生離心泵：
標準設計：
SolidC泵適用于標準負載應用領域，適用CIP（原位清洗）解決方案、公用事業、水（處理、加熱、冷卻）、洗衣機、工作范圍內的流體輸送等。
SolidC適用在食品、奶制品、飲料、個人護理用品、制藥、精細化工和水工業使用。
標準設計：
SolidC泵由標準電機、短軸、機械式壓緊聯軸節、接頭、支承板、葉輪、泵蓋和軸封組成。alfalaval阿法拉伐衛生泵,LCP iCP 阿法拉伐泵 alfalaval衛生泵
SolidC 性能
限于已經驗證的應用領域：奶制品、CIP供水和葡萄酒。
限于已經驗證的應用領域：奶制品、CIP供水和葡萄酒。
SolidCL Pump
Applications
The SolidCL pump is designed for standard duty applications, like
pumping CIP (Cleaning In Place) solutions, utilities, water (processing,
heating, cooling), washing machines, simple transport duty within
working range. SolidCL is suited for use in the food, dairy, beverage
and water industries.
Standard design
The SolidCL pump consists of a standard motor, stub shaft,
mechanical compression coupling, adaptor, back plate, impeller, pump
casing and shaft seal.
The SolidCL pump is designed for CIP with emphasis on large internal
roundings and cleanable seals.
SolidCL has a stainless steel shroud for protection of the motor, and
the complete unit is supported on four adjustable legs.
Shaft seals
The SolidCL pump is equipped with either an external single or a
flushed shaft seal. Both have stationary seal rings in acid-resistant steel
AISI 329 with sealing surface in silicon carbide and rotating seal rings in
carbon. The secondary seal of the flushed seal is a long lasting lip seal.
Materials
Productwetted steel parts: . . . . . . . . .Acid-resistant steel 1.4403
(304L).
Other steel parts: . . . . . . . . . . . . . . .Stainless steel 1.4301 (304).
Finish: . . . . . . . . . . . . . . . . . . . . . .Blasted (standard)
3A polishing (Ra 0.8).
Productwetted seals: . . . . . . . . . . . .EPDMrubber (acc. to FDA).
Technical data
Max. inlet pressure: . . . . . . . . . . . . .400 kPa (4 bar).
Temperature range: . . . . . . . . . . . . . .-10°C to +120°C (EPDM).
Flushed shaft seal (FSS):
Water pressure inlet: . . . . . . . . . . . . .max. 100 kpa (1 bar).
Water consumption: . . . . . . . . . . . . .0.25 -0.5 l/min.
Connections for FSS:
R 1/8" (BSP) external thread.
Motor
Foot-flanged motor according to the IEC metric standard (EFF II), 2
poles = 3000/3600 rpm. at 50/60 Hz, IP 55 (with drain hole with
labyrinth plug), insulation class F.
Voltage and frequency
3 ~, 50 Hz, 220-240V Δ/380-420VY ≤ 4 kW
3 ~, 60 Hz, 250-280V Δ/440-480VY ≤ 4.6 kW
3 ~, 50 Hz, 380-420V Δ/660-690VY ≥ 5.5 kW
3 ~, 60 Hz, 440-480V Δ ≥ 6.4 kW
Motor sizes
50 Hz: 1.1, 1.5, 2.2, 3, 4, 5.5, 7.5, 11, 15, 18.5 kW
60 Hz: 1.3, 1.75, 2.5, 3.5, 4.6, 6.4, 8.6, 12.5, 17, 21 kW.
Warranty
Extended 3-years warranty on the SolidCL Centrifugal Pump range.
The warranty covers all non wear parts on the condition that genuine
Alfa Laval Spare Parts are used.
OC TOB E R 2008
The SolidCL pump is designed for standard duty applications, like
pumping CIP (Cleaning In Place) solutions, utilities, water (processing,
heating, cooling), washing machines, simple transport duty within
working range. SolidCL is suited for use in the food, dairy, beverage
and water industries.
Standard design
The SolidCL pump consists of a standard motor, stub shaft,
mechanical compression coupling, adaptor, back plate, impeller, pump
casing and shaft seal.
The SolidCL pump is designed for CIP with emphasis on large internal
roundings and cleanable seals.
SolidCL has a stainless steel shroud for protection of the motor, and
the complete unit is supported on four adjustable legs.
Shaft seals
The SolidCL pump is equipped with either an external single or a
flushed shaft seal. Both have stationary seal rings in acid-resistant steel
AISI 329 with sealing surface in silicon carbide and rotating seal rings in
carbon. The secondary seal of the flushed seal is a long lasting lip seal.
Materials
Productwetted steel parts: . . . . . . . . .Acid-resistant steel 1.4403
(304L).
Other steel parts: . . . . . . . . . . . . . . .Stainless steel 1.4301 (304).
Finish: . . . . . . . . . . . . . . . . . . . . . .Blasted (standard)
3A polishing (Ra 0.8).
Productwetted seals: . . . . . . . . . . . .EPDMrubber (acc. to FDA).
Technical data
Max. inlet pressure: . . . . . . . . . . . . .400 kPa (4 bar).
Temperature range: . . . . . . . . . . . . . .-10°C to +120°C (EPDM).
Flushed shaft seal (FSS):
Water pressure inlet: . . . . . . . . . . . . .max. 100 kpa (1 bar).
Water consumption: . . . . . . . . . . . . .0.25 -0.5 l/min.
Connections for FSS:
R 1/8" (BSP) external thread.
Motor
Foot-flanged motor according to the IEC metric standard (EFF II), 2
poles = 3000/3600 rpm. at 50/60 Hz, IP 55 (with drain hole with
labyrinth plug), insulation class F.
Voltage and frequency
3 ~, 50 Hz, 220-240V Δ/380-420VY ≤ 4 kW
3 ~, 60 Hz, 250-280V Δ/440-480VY ≤ 4.6 kW
3 ~, 50 Hz, 380-420V Δ/660-690VY ≥ 5.5 kW
3 ~, 60 Hz, 440-480V Δ ≥ 6.4 kW
Motor sizes
50 Hz: 1.1, 1.5, 2.2, 3, 4, 5.5, 7.5, 11, 15, 18.5 kW
60 Hz: 1.3, 1.75, 2.5, 3.5, 4.6, 6.4, 8.6, 12.5, 17, 21 kW.
Warranty
Extended 3-years warranty on the SolidCL Centrifugal Pump range.
The warranty covers all non wear parts on the condition that genuine
Alfa Laval Spare Parts are used.
OC TOB E R 2008
Options
A. Impeller with reduced diameter.
B. Motor for other voltage and/or frequency.
C. 1500 rpm. motor.
D. Flushed shaft seal.
E. Product wetted seals of Nitrile (NBR), Fluorinated rubber (FPM)
or FEP.
F. Rotating seal ring of Silicon Carbide.
Ordering
Please state the following when ordering:
- Pumpsize.
- Connections.
- Impeller diameter.
- Motor size.
- Voltage and frequency.
- Flow, pressure and temperature.
- Density and viscosity of the product.
- Options.
Note!alfalaval阿法拉伐衛生泵,LCP iCP 阿法拉伐泵 alfalaval衛生泵
For further details, see also ESE00232.
This product has EHEDG certification.
A. Impeller with reduced diameter.
B. Motor for other voltage and/or frequency.
C. 1500 rpm. motor.
D. Flushed shaft seal.
E. Product wetted seals of Nitrile (NBR), Fluorinated rubber (FPM)
or FEP.
F. Rotating seal ring of Silicon Carbide.
Ordering
Please state the following when ordering:
- Pumpsize.
- Connections.
- Impeller diameter.
- Motor size.
- Voltage and frequency.
- Flow, pressure and temperature.
- Density and viscosity of the product.
- Options.
Note!alfalaval阿法拉伐衛生泵,LCP iCP 阿法拉伐泵 alfalaval衛生泵
For further details, see also ESE00232.
This product has EHEDG certification.
alfalaval阿法拉伐衛生泵,LCP iCP 阿法拉伐泵 alfalaval衛生泵.
更多相關系列敬請咨詢菲朗公司。
采購中心
