ISO6270-2冷凝水氣候試驗箱技術參數
測試氣候條件 | 循環所需時間 | 為達到平衡狀態所需要的工作空間的狀態 | ||||
名稱 | 縮寫 | 測試段 | 合計 | 空氣溫度 | 相對濕度 | |
冷凝水-恒定氣候狀態 | CH | 需要加熱至結束 | (40±3)℃ | 大約99%并伴有受測試體結露 | ||
交變氣候狀態 | 伴有交變 空氣濕度 和空氣溫 度 | AHT | 包括8小時預熱 | 24小時 | (40±3)℃ | 大約99%并伴有受測試體結露 |
包括16小時的冷卻 (將人工模擬氣候室打開并通風) | 18 -28 ℃ | 低于99% | ||||
伴有交變 空氣溫度 | AT | 包括八小時預熱 | 24小時 | (40±3)℃ | 大約99%并伴有受測試體結露 | |
包括16小時的冷卻 (人工模擬氣候室保持關閉) | 18 -28 ℃ | 大約99%(飽和) |
ISO6270-2冷凝水氣候試驗箱優點 :
1、 Particularly energy-saving, heat-insulated compact chest-type design Housing and testing chamber made of high-quality glass-fibre reinforced polyester resin on fully laminated steel with castors and adjustable feet
特制的節能、隔熱緊湊型箱體設計,內置加強鋼架的高品質玻璃纖維復合材料,標配腳輪和可 調節地腳螺釘;
2、 Double-wall energy-saving testing chamber cover (particularly torsion-resistant and
providing insulation)
雙層節能箱蓋設計(特制防扭力、隔熱)
3、 Easy handling due to double gas strut support and ergonomically formed handle
方便的雙氣壓支撐桿,人體工學設計把手;
4、 Testing chamber volume approx. 1000 litre
試驗容積大約 1000 升;
5、 Testing chamber seals made of foam silicone profiles
硅樹脂發泡密封
6、 Sample depot made of fully non-corrosive and deflection-resistant glass-fibre reinforced plastic round tubes
全防腐、防變形玻璃纖維加強型圓桿樣品架;
7、 Automatic refill system for deionized water to supply operating water for condensation
test.(Required flow pressure of deionized water: 0,5 - 1 bar)
冷凝水試驗去離子水自動上水系統 (需要去離子水壓:0,5 - 1 bar)
8、 Large-surface heating on the outer down sides of the testing chamber protected against
corrosion for constant heating
箱體外下部的大加熱面積設計,防止長時間加熱狀態的腐蝕;
9、 Electronic micro-processor controlled temperature control (PID) of testing chamber
試驗 PID 溫度控制
10、 LED-Display resolution of set and actual value 0,1°C. Temperature constancy <± 0,5 K.
LED 顯示設定和實際溫度分辨率 0,1°C,溫度波動小于± 0,5 K;
11、選項:PID Temperature controller
用于連接設備到電腦,并自動記錄數據
The chest is supplied fully equipped and ready for connection. The standard delivery scope includes: 3 m mist drainage hose d 50, 3 m safety overflow hose d 50, 2 m condensate drainage hose d 20
設備附件齊全,易于現場安裝。標準配置包括:3m長 d50 噴霧排水管,3m長 d50 溢流管,2m長 d20 冷凝排水管