德國進口單級雙吸離心泵

德國進口單級雙吸離心泵 進口單級雙吸離心泵廠家 進口單級雙吸離心泵價格Single - stage double - suction centrifugal pump

德國KAYSEN凱森進口單級雙吸離心泵概述

單級雙吸離心泵是新節能臥式中開泵，供輸送清水或物理化學性質類似于水的其他液體，根據用戶需求，通過改變泵結構及材質可用于輸送多泥沙水或各類腐蝕性液體。

單級雙吸泵殼中開之離心泵，供抽送清水或物理化學類似于水的其它液體之用。被輸送液體溫度不得高于80℃。

主要特點：

本型泵的吸入口與吐出口均在水泵軸心線的下方，與軸線垂成水平方向．檢修時無需拆卸進出口水管及電機．從轉動方向看去，水泵為順時針方向旋轉/根據用戶需要亦可改為逆時針方向旋轉。

泵主要零件有：泵體，泵蓋，葉輪，軸，雙吸密封環，軸套等。

泵體與泵蓋構成葉輪的工作室，在進出水法蘭上，制有安裝真空表和壓力表的管螺孔。進出水法蘭的下部，制有放水的管螺孔。

經過靜平衡校驗的葉輪，用軸套的兩邊的軸套螺母固定在軸上，其軸向位置可通過軸套螺母進行調整。

泵軸由兩個單列向心球軸承支承。軸承裝在軸承體內，安裝在泵體兩端，用黃油潤滑。

雙吸密封環用以減少水泵壓力室的水漏回吸水室。

泵通過彈性聯軸器由電動機直接傳動。必要時亦可用內燃機傳動。

軸封為軟填料密封，根據用戶需要可采用機械密封結構。


主要優點：

●雙吸葉輪，流量大、效率高

●高效節能，應用范圍廣，壽命長

●維修方便，無須拆卸進水、出水管路及電機

●結構緊湊 外形美觀，穩定性好，便于安裝

●軸 承 選用SKF及NSK軸承保證運行平穩，噪音低，使用壽命長

●軸 封 選用BURGMANN機械密封或填料密封，能保證8000小時運行無泄漏

●安裝形式 裝配時不需調整，可根據現場使用條件，分立式或臥式安裝

●可供選用的機械密封、填料密封其冷卻潤滑均采用內循環
●運行平穩 優化設計的雙吸葉輪使軸向力減小到zui低限度，且有優異水力性能的葉型，并經精密鑄造，泵殼內表面及葉輪表面極其光華具有顯著的抗汽蝕性能和高效率

●加裝自吸裝置，可實現自動吸水，即不需安裝底閥，不需真空泵，不需倒灌，泵可以啟動

主要應用：

●工廠

●城市

●礦山

●電站

●農田

●水利工程等領域

德國進口單級雙吸離心泵 進口單級雙吸離心泵廠家 進口單級雙吸離心泵價格

Germany KAYSEN Kaisen imported single - stage double - suction centrifugal pump overview

Single-stage double-suction centrifugal pump is a new energy-saving horizontal open pump for the delivery of water or other physical and chemical properties similar to water, according to user needs, by changing the pump structure and material can be used to transport more sediment or all kinds of corrosion Liquid.

Single-stage double-suction pump in the open centrifugal pump for pumping water or physical chemistry similar to other liquids used in water. The temperature of the liquid to be delivered shall not be higher than 80 ° C.

main feature:

The pump inlet and outlet are in the pump below the axis line, and the axis down into the horizontal direction. Maintenance without the need to remove the import and export of water pipes and motors. From the direction of rotation, the pump is rotated in the clockwise direction and can also be rotated counterclockwise according to the user's needs.

Pump main parts are: pump, pump cover, impeller, shaft, double suction ring, sleeve and so on.

Pump and pump cover constitute the impeller of the studio, in and out of the water flange, the system has a vacuum gauge and pressure gauge tube screw hole. Out of the lower part of the water flange, made of water pipe screw hole.

The impeller with static balance check is fixed on the shaft with the sleeve nuts on both sides of the sleeve and its axial position can be adjusted by the sleeve nut.

The pump shaft is supported by two single row radial ball bearings. Bearings installed in the bearing body, installed at both ends of the pump, with butter lubrication.

Double suction seal ring to reduce the pump pressure chamber water leakage back to the suction chamber.

The pump is driven directly by the motor through the elastic coupling. If necessary, can also use internal combustion engine transmission.

Shaft seal for the soft packing seal, according to user needs can be mechanical seal structure.

Key Benefits:

● double suction impeller, flow, high efficiency

● energy efficient, wide range of applications, long life

● easy maintenance, no need to disassemble water, water pipes and motors

● compact structure beautiful appearance, good stability, easy to install

● SKF SKF bearings and NSK bearings to ensure smooth operation, low noise, long service life

● BALGMANN mechanical seal or packing seal to ensure 8000 hours of operation without leakage

● installation form of assembly without adjustment, according to field conditions, discrete or horizontal installation

● Optional mechanical seal, packing seal cooling and lubrication are used within the cycle
● Smoothly optimized double suction impeller designed to minimize the axial force, and has excellent hydraulic performance of the leaf type, and by precision casting, the pump shell surface and impeller surface extremely Guanghua has significant anti-cavitation performance and high efficiency

● Installation of self-priming device, can achieve automatic water absorption, that is, do not need to install the end valve, no vacuum pump, no back irrigation, the pump can start

main application:

● Factory

●City

●Mine

● power station

● farmland

● Water conservancy projects and other fields

德國KAYSEN凱森對您的承諾：

●放心的質量：從鑄件到產品，實行全過程質量監控，*檢測，責任到人！

●貼心的價格：高效成本控制，自產自銷，減少中間環節，讓利于客戶！

●快速的貨期：充足的庫存，上海便捷物流，縮短交貨期，嚴格按照合同期交貨！

Germany Kaysen commitment to you:

● Reliable quality: from casting to the product, the implementation of the whole process of quality control, all-round detection, responsibility to the people!

● intimate price: efficient cost control, production for sale, to reduce the intermediate links, to help customers!

● fast delivery: adequate inventory, Shanghai convenient logistics, shorten the delivery time, in strict accordance with the contract delivery!

進口單級雙吸離心泵廠家 進口單級雙吸離心泵價格