◆SET 系列雙螺桿擠出造粒機，擠出形式有前出料和側出料兩種。經混合、捏和的濕物料或低軟化點 ( 一般小于 50℃ ) 物料在螺桿輸送、擠壓作用下，從機頭開孔模板擠出，再經過干燥或冷卻得到顆粒成品，從而實現將粉狀產品改變?yōu)榫鶆虻念w粒產品的目的。顆粒形狀為圓柱狀，成品顆粒直徑可由模板開孔孔徑調節和控制：側出料為 0.7-2.0mm，前出料為 1.5-12mm，成粒率≥95％。
◆The machine of front and side for material to be extruded out. Wet material or material with
low melting point (general means<50℃ ) after being kneaded and mixed shall be extruded outfrom mould plate at the head of the plant due to being conveyed and pressed by screws，
and then be dried or cooled to form end products of particles so as to complete the course
of changing material from powder to particle. The shape of grain is cylindrical. The diameter
of end grain can be chosen and controlled by means of changing the diameter of holes in themould plate: for side type is 0.7-2.0 mm, for front type is 1.5-2 mm. The rate of end product
is equal to or more than 95％ .
◆ SET 系列雙螺桿擠壓造粒機廣泛適用于橡膠助劑、食品添加劑、塑料助劑、催化齊、農藥、染料、顏料、日化、制藥行業需造粒的產品。
◆The plant is widely applied to material needs granulating such as rubber auxiliar, food additive, plastic auxiliary,catalyzer,agrochemicals, dye, pigment, daily chemicals, medicine etc.
SET 系列雙螺桿擠壓造粒機技術參數
采購中心
