GHL系列高速混合制粒機

特 點Features

◎本機采用臥式圓簡構造，結構合理。

◎充氣密封驅動軸，清洗時可切換成水。

◎流態化造粒，成粒近似球形，流動性好。

◎較傳統工藝減少25%粘合劑，干燥時間縮短。

◎每批次干混2分鐘，造粒1-4分鐘，工效比傳統工藝提高4- -5倍。

◎在同一封閉容器內完成，干混濕混-制粒，工藝縮減，符合GMP規范。

◎This machine is of horizontal round and simple structure， with reasonable structure.

◎Inflatable sealing drive shaft can be switched to water during cleaning.

◎Fluidized granulation, the granulation is approximately spherical and has good fluidity.

◎Compared with the traditional process, the adhesive is reduced by 25%, and the drying time is shortened.

◎Each batch is dry mixed for 2 minutes and granulated for 1-4 minutes. The work efficiency is 4-5 times higher than that of the traditional process.

◎Completed in the same closed container, dry-mixed, wet-mixed, pelletized, with reduced process and conforming to GMP specifications.

原理 Principles

粉體物料與粘合劑在圓簡形容器中由底部混合槳充分混合成濕潤軟材，然后由側置的高速粉碎槳切割成均勻的濕顆粒。

The powder material and the binder are fully mixed by the bottom mixing paddle into wet soft material in a round cylindrical container, and then are cut into uniform wet particles by the side high-speed crushing paddle.

夾套型工藝流程 Flow chart of jacket

技術參數 Technical parameters