詳情介紹:
IEC884-1、GB2099.1、VDE0620、BS1363
插頭線滾桶跌落試驗機測試插頭線在經過一定次數自由跌落后的安全與可靠度。試法是把插頭含后端電源線 100mm 處剪斷,作為試件,投入滾桶內,依試件重量設定標準所要求之跌落次數,使試件連續落下撞擊,到達設定次數后,本機自動停機,然后取出試件檢查受損程度。
Cut off the cord with 100mm behind plug as being a test specimen。Put it into Tumbling barrel,then preset the tumbling numbers according to the weight of test specimen。Check the damaged degree of the test specimen ( which is subject to the above successive drops and impacts ) after the preset numbers are reached。
插頭線滾桶跌落試驗機測試插頭線在經過一定次數自由跌落后的安全與可靠度。試法是把插頭含后端電源線 100mm 處剪斷,作為試件,投入滾桶內,依試件重量設定標準所要求之跌落次數,使試件連續落下撞擊,到達設定次數后,本機自動停機,然后取出試件檢查受損程度。
Cut off the cord with 100mm behind plug as being a test specimen。Put it into Tumbling barrel,then preset the tumbling numbers according to the weight of test specimen。Check the damaged degree of the test specimen ( which is subject to the above successive drops and impacts ) after the preset numbers are reached。
滾動速度 Tumbling speed | 5r.p.m ( 即每分鐘跌落 10 次 ) |
計數器 Counter | 電子式,6 位數,到達設定次數自動停機 Electronic type 6 digits,auto-stop during the preset numbers are reached |
電源 Power | AC220V / 50Hz |