詳情介紹:
UL817、UL62
插頭線靜態拉力試驗機試驗插頭與電線之間、插頭片與電線之間或線檔與電線之間在經過一定時間負重后的耐負荷強度,同時可試驗 6 個試件。試法是將插頭片固定于試驗機上方,再將砝碼鉤在電源線上,設定好標準所要求的試驗時間后,按啟動按鈕后試驗機會慢慢降下托板使砝碼底面懸空吊著試件,拉力方向應與插片之插向成垂直,在標準要求的時間內線材不能脫落或位移不能超過標準要求的距離。
This machine is suitable to test load strength between the conductors and blades。It can test six samples at the same time by a gradually applied pull of a certain load to the free end of the cord while the attachment plug is securely supported。The force shall be applied for a specified time in a direction perpendicular to the plane of cord entry。
This machine is suitable to test load strength between the conductors and blades。It can test six samples at the same time by a gradually applied pull of a certain load to the free end of the cord while the attachment plug is securely supported。The force shall be applied for a specified time in a direction perpendicular to the plane of cord entry。
荷重砝碼 Load | 8LB,15LB,20LB,30LB 各 3 個 |
計時器 Timer | 0 ~ 9999S 可任意設定 Adjustable |
電源 Power | AC220V / 50Hz |