■ 應用 ApplicAtion
◎ 制藥工業中的造粒：片劑顆粒、沖劑顆粒、膠囊劑顆粒。
◎ 食品工業的造粒：可可、咖啡、奶粉、顆粒果汁、調味品等。
◎ 其它行業的造粒：農藥、飼料、化肥、顏料、染料化工等。
◎ 粉狀或顆粒狀濕物料的干燥。
◎ 包衣：顆粒、丸劑保護層、著色、緩釋、薄膜、腸溶包衣等。
◎ Pharmaceutical industry :granular tablet, granule taken with water, granular capsule.
◎ Foodstuff: cocoa, coffee, milk powder, juice of granule, flavoring and so on.
◎ Other industries: pesticide, feed, fertilizer, pigment, dyestuff and so on.
◎ Drying: for powder or granule damp material.
◎ Coating: granule, pill protection layer, pigmentation, controlled release, film, or bowels solved coating.
■ 原理 principle
◎ 物料粉末粒子,在原料容器（流化床）中呈環形流化狀態,受到經過凈化后的加熱空氣預熱和混合,將粘合劑溶液霧化噴入,使若 干粒子聚集成含有粘合劑的團粒,由于熱空氣對物料的不斷干燥,使團粒中水分蒸發,粘合劑凝固,此過程不斷重復進行,形成理想 的、均勻的多微孔球狀顆粒。
◎ The powder granule in vessel （fluid bed） appears the state of fluidization. It is pre heated and mixed with clean and heated air. At the same time adhesive is sprayed into the container. It makes some particles become granulating which contains adhesive. Being of unceasing dry through hot air, the moisture in the granulating is evaporated and the adhesive is solidification. The process is carried out continuously. Finally it forms ideal, uniform and porous granules.
■ 技術參數 technicAl pArAMeters
| 項目 | 單位 | 機型 | |||||||||
| 3 | 5 | 15 | 30 | 60 | 120 | 200 | 300 | 500 | |||
| 原料容器 | 容量 | L | 12 | 22 | 45 | 100 | 220 | 420 | 670 | 1000 | 1500 |
| 直徑 | MM | 300 | 400 | 550 | 700 | 1000 | 1200 | 1400 | 1600 | 1800 | |
| 生產能力 | zui小 | KG | 1.5 | 4 | 10 | 15 | 30 | 80 | 100 | 150 | 250 |
| zui大 | KG | 4.5 | 6 | 20 | 45 | 90 | 160 | 300 | 450 | 750 | |
| 風機 | 風量 | m3/H | 1000 | 1200 | 1400 | 1800 | 3000 | 4500 | 6000 | 7000 | 8000 |
| 風壓 | MM H2O | 375 | 375 | 480 | 480 | 950 | 950 | 950 | 950 | 950 | |
| 功率 | KW | 3 | 4 | 5.5 | 7.5 | 11 | 18.5 | 22 | 30 | 45 | |
| 蒸汽消耗量 | KG/H | 15 | 23 | 42 | 70 | 141 | 211 | 282 | 366 | 451 | |
| 壓縮空氣耗量 | m3/min | 0.9 | 0.9 | 0.9 | 0.9 | 1.0 | 1.0 | 1.1 | 1.5 | 1.5 | |
| 主機重量 | KG | 500 | 700 | 900 | 1000 | 1100 | 1500 | 1500 | 1800 | 2000 | |
| 蒸汽壓力 | MPA | 0.3-0.6 | |||||||||
| 溫度 | ℃ | 室溫-120℃范圍內可調節 | |||||||||
| 作業時間 | MIN | 隨物料特性而定45-90 | |||||||||
| 物料收得率 | % | ≥99 | |||||||||
| 噪聲 | DB（A） | 風機與主機隔離安裝，噪聲≤75DB（A） | |||||||||
| 主機外形尺寸 | M | 1.0×0.6 ×2.1 | 1.2×0.7 ×2.3 | 1.25×0.9 ×2.5 | 1.6×1.1 ×2.5 | 1.85×1.4 ×3 | 2.2×1.65 ×3.3 | 2.34×1.7 ×3.8 | 2.8×1.9 ×4.0 | 3×2.25 ×4.2 | |
采購中心
