德國進口滑片泵 進口油泵廠家 進口滑片泵價格

德國進口滑片泵 進口油泵廠家 進口滑片泵價格

Vane pump

德國KAYSEN凱森進口滑片泵概述
滑片泵主要由轉子、定子(即泵體)、滑片及兩側蓋板所組成。依靠偏心轉子旋轉時泵缸與轉子上相鄰兩葉片間所形成的工作容積的變化來輸送液體或使之增壓的回轉泵(見泵)。
轉子是具有徑向槽的圓柱體，槽內安放滑片，滑片可以在槽內自由滑動。轉子偏心地安放在泵體內，當轉子由原動機帶動旋轉時，滑片依靠離心力或彈簧力緊壓在泵體的內壁上。在轉子前半轉，相鄰兩葉片所包圍的空間逐漸增大形成局部真空而吸入液體。而后半轉，此空間逐漸減小，擠壓液體，將液體壓送到排出管中。根據滑片的安裝位置分有內裝滑片泵(滑片裝在轉子上)和外裝滑片泵(滑片裝在泵體上)。一般這類泵工作壓力在7MPa以下。

主要特點：
●可靠的密封性
針對粘性、高溫介質的特點，采用特殊結構的機械密封，具有安全、耐用、可靠特點。
●維修簡單、方便
打開泵蓋，提出舊滑片，插入新滑片。只需幾分鐘，您的泵就可以重新投入工作。日常檢查同樣容易。
●安全靈敏的壓力保證
泵中設置安全溢流閥，在出口系統突然關閉時，出口壓力上升量不超過0.15Mpa，這一方面保證泵和系統的安全，另一方
面，保證電機不過載。
●較強的自吸能力
用于抽吸地下罐時，提升高度可達7.5m。
●高效率
泵內滑片受離心力、機械推力、液壓力的聯合作用，緊貼定子內曲線運動，從而使泵具有*的高效率。
●保持性能不變的自調滑片
滑片從轉子槽中滑出，不斷補充磨損，而不降低泵的性能。這與齒輪泵有本質的區別。
●輸送剪力敏感性液體的能力
液力滑片高效能的設計使泵在驅動時減少了滑片對流體的剪力及攪動，避免了因此而產生的流體性質的改變。

主要優點：
●結構較緊湊
●外形尺寸不大
●流量較均勻
●運轉平穩
●脈動和噪聲小
●效率比一般齒輪泵高

主要應用：
滑片泵主要用于機床、油壓機、起重運輸機械、工程機械和塑料注塑機等的液壓系統和潤滑系統。

德國進口滑片泵 進口油泵廠家 進口滑片泵價格

Germany KAYSEN Import Vane Pump Overview
Vane pump mainly by the rotor, the stator (ie, pump), vane and both sides of the cover plate. A pump (see pump) is conveyed by means of a change in the working volume formed between the pump cylinder and the adjacent two blades on the rotor when the eccentric rotor rotates.
The rotor is a cylinder with a radial groove in which the vane is fitted and the vane can slide freely in the slot. The rotor is eccentrically mounted in the pump body, and when the rotor is driven by the prime mover, the vane is pressed against the inner wall of the pump body by centrifugal force or spring force. In the rotor half a turn, the adjacent two leaves surrounded by the space gradually increased the formation of local vacuum and inhalation of liquid. And then half turn, this space is gradually reduced, squeezing the liquid, the liquid pressure to the discharge tube. According to the installation location of the vane is equipped with a built-in vane pump (skate mounted on the rotor) and the outer vane pump (slide on the pump body). Generally this type of pump working pressure below 7MPa.

main feature:
● Reliable sealing
For the characteristics of viscous, high temperature media, the use of special mechanical seal structure, with a safe, durable and reliable features.
● simple and convenient maintenance
Open the pump cover, lift the old slide, insert the new slide. In just a few minutes, your pump can be put back into work. Daily check is also easy.
● Safe and sensitive pressure guarantee
The pump set the safety relief valve, the exit system suddenly closed, the outlet pressure rise does not exceed 0.15Mpa, this area to ensure the safety of the pump and the system, the other side
Face, to ensure that the motor is not overloaded.
● Strong self-priming ability
For suction underground tank, the lifting height of up to 7.5m.
● High efficiency
Pump vane by the centrifugal force, mechanical thrust, hydraulic pressure combined action, close to the stator curve movement, so that the pump has a unique high efficiency.
● Keep the self-adjusting vane with the same performance
The slider slides out of the rotor slot and continues to compensate for wear without degrading pump performance. This is essentially different from the gear pump.
The ability to transport shear sensitive liquids
The high-performance design of the hydraulic vane allows the pump to reduce the shearing force and agitation of the vane to the fluid during driving, thus avoiding the consequent changes in the fluid properties.

Key Benefits:
● The structure is more compact
● Dimensions are not large
● Traffic is more uniform
● smooth operation
● pulsation and noise is small
The efficiency is higher than the average gear pump

main application:
Vane pump is mainly used for machine tools, hydraulic presses, lifting transport machinery, engineering machinery and plastic injection molding machines and other hydraulic systems and lubrication systems.

德國KAYSEN凱森對您的承諾：

●放心的質量：從鑄件到產品，實行全過程質量監控，*檢測，責任到人！

●貼心的價格：高效成本控制，自產自銷，減少中間環節，讓利于客戶！

●快速的貨期：充足的庫存，上海便捷物流，縮短交貨期，嚴格按照合同期交貨！

Germany Kaysen commitment to you:

● Reliable quality: from casting to the product, the implementation of the whole process of quality control, all-round detection, responsibility to the people!

● intimate price: efficient cost control, production for sale, to reduce the intermediate links, to help customers!

● fast delivery: adequate inventory, Shanghai convenient logistics, shorten the delivery time, in strict accordance with the contract delivery!